Reviews
Fits: HONDA NC750X, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER BOLD'OR
Clamp set for Attachment Cross Bar
This product is listed in Honda's OEMAttachmentCatalogue and is installed in combination with the Shaft for AttachmentCross Bar.
Current NC750X (from 2021) I purchased this product because the OEM Knuckle guard is attached to the Handlebar Brace, and I thought it would not be possible to install the Handlebar Brace with a regular Handlebar Brace Clamp because of the Cable clip in the mounting position. This product has a thin wall so the cable clip can be easily fended off and installed.
Since the standard outer diameter of 22.2mm can be used for installation, it can be used for other purposes in addition to handlebars, depending on the ingenuity of the user.
I wish they were the same color because the Bolt and Washer are Silver and the color looks floaty lol.
View detail
Fits: HONDA CB1300SUPER FOUR, HONDA CB1300SUPER FOUR SP, HONDA NC750X, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP
Shaft for Attachment Cross Bar
This product is listed in Honda's OEMAttachmentCatalogue and is to be installed in combination with the AttachmentCross Bar Clamp set.
The outer diameter is 22.2mm, the same as a standard handlebar, so attachments can be attached to the handlebar.
Current NC750X (from 2021) This product could be installed with a pre-2021 OEMOption Knuckle guard that does not have an Option setting on the
I do not think it will play the same role as the Handlebar Brace, but it will serve well enough to attach other attachments.
View detail
Fits: HONDA NC750X, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER BOLD'OR
Used to install fog on Guard pipe
Material:It's aluminum and fairly thin-walled, so I don't think it's suitable for mounting heavy objects.
It is used to mount a Small Fog Lamp.
22.A 2mm Pipe can be diverted.
I have used the same system in my previous car to install fog lights on the Engine GuardPipe, and I have been using the same system in my new car.
It has been about 2 years in total and no Cracks have occurred.
The Pipe side edge is angled, so it is inevitable that the Pipe will be scratched during mounting and positioning.
It is best to avoid repetition of attaching and detaching, including temporary fixing, as much as possible.
View detail
Fits: HONDA CB1300SUPER FOUR, HONDA CB1300SUPER FOUR SP, HONDA NC750X, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP
Shaft for DAYTONA DAYTONA Attachment Cross Bar
These products are listed in the Honda Genuine Accessories.Catalogue.
The handlebar is black, so I decided to go with black.
I needed it to install Navigation and Camera.
Instead of placing the bar between the Clamp, place the bar on the top side and the Bolt is from the bottom.
View detail
Various mounting options for Handlebar/Handlebar Brace
The JA55 CT125CT110 HUNTER CUB has a generator output of 190W to match its engine displacement volume, so you can't increase the attachment of the electrical system too much.
But DriveRecorder is the first priority, so I installed a Chinese DriveRecorder
I installed this Bracket on the Handlebar Brace, which is easy to check while driving because it is a main unit with monitor.
It seems to have been stuck on reasonably firmly though it was only stuck on with 3M Strong Double-sided Tape
It is impossible to make a hole with Drill because there is no space in the back side, though it is sufficient if it is not so heavy.
It's not a bad product if you use it as not a bracket to install more than a small object.
View detail
Fits: KAWASAKI Ninja 250R, KAWASAKI Ninja 250R, KAWASAKI Ninja 250R, KAWASAKI Ninja 250R, KAWASAKI Ninja 250R, KAWASAKI Ninja 250R, KAWASAKI Ninja 250, KAWASAKI Ninja 250, KAWASAKI Ninja 250, KAWASAKI Ninja 250, KAWASAKI Ninja 250, KAWASAKI Ninja 250R
For RC,
It can also be used for KTM. I seemed to be able to use it at first glance, so I tried purchasing it for trial, but it was batched in RC 390. The bar chose the one of the Standard Type, but it seems that Short was better, so it is planned to replace it. View detail
Attach to YZF-r25
I bought it for wearing iphone with RAM Mount. A 22 mm hexagon is required for installation. OEM's Stem Nut is incompatible with Top Bridge at Silver, but this is Black color so it's excellent with the Top Bridge. I used Stainless Steel 8 mm Cap bolt I bought at Homsen because the attached 8 mm Cap bolt was to rust soon.
View detail
Since the handle clamp of w650 is an inch design, its width of a handle for exclusive use is also narrow, and when there is no favorite handle, the parts here play an active part. He actually equipped with the forward conti of 22.2 pies. For the m
Since the handle clamp of w650 is an inch design, its width of a handle for exclusive use is also narrow, and when there is no favorite handle, the parts here play an active part.
He actually equipped with the forward conti of 22.2 pies.
For the moment, there is no gap and it is relieved.
Since it was required for the clamp part and the switch part, two sets were purchased.
The width of handle selection spreads and they are cheap and convenient parts.
View detail