Reviews
Silver insert color is nice.
Installed in conjunction with Grip replacement.
Since the motorcycle has many plating parts on the body, silver was selected as an accent to the handlebar's black.
The color is good and the Silver looks good.
We considered heavier products, but chose this product with less thickness considering the width when parking.
View detail
Fits: YAMAHA , YAMAHA MT-07
Quality is good, but may be difficult to match.
I bought this to replace the bar end mirror on my xsr900, and although the gap at the bar end is wider than the OEM product, I had no choice but to install their bar end mirror.
That is the only thing that is a little unsatisfactory. Other than that, the construction is satisfactory.
View detail
As expected of a DAYTONA product, Repair Parts are substantial.
The Daytona MultiBar mount end caps that came with the car from the time of delivery were missing from the beginning, and although they were painted, they were slightly rusted inside and I had been thinking for some time that they did not look good.
While buying another product on Webike. Speaking of which..." I remembered that I was looking for an end cap and found this product.
I bought it without any preliminary research and it was EXACTLY as shown in the picture.
MultiBar mounts made by DAYTONA would be mostly compatible.
There were two steps, the first step went in easily, and the second step was a tight Size so that it would not slip out.
I don't think it will come off so easily, because it is so tight that if you push it in with your bare hands with a lot of force, it will go in with a snap.
Thanks to the Repair Parts setup, we didn't have to bother replacing it, and we are happy with the much improved look.
As a side note, since the cap is for a standard round pipe, it can also be used as an end cap for furniture, etc.
View detail
Fits: Others , SUZUKI V STROM 650
Easy to install
Model:YZF-R25
I was about to buy Repair/Option Parts, but changed my order because Body was on sale for less. I have used it before to reduce vibration on a single cylinder and I am using it on my R25. Recently, I have been trying to increase or decrease the weight because I am concerned about the vibration, and when I made it heavier than 350g, my whole arm went numb, so now I am going to try 300g.
View detail
To match Grip.
I changed the blue end to this one to match the grip to black. The brake lever is gold, so the grip is black and the end is also black. View detail
Fit perfect!
I replaced the handlebar of my 2018 Suzuki SV650 with an aftermarket brand. New handlebar was made of aluminum alloy and the internal diameter was smaller at 14mm so the the OEM bar end did not fit. This product are heavy and fit perfectly. Waiting for the weekend to test the vibration damping effect on the handlebar. View detail
Fits: SUZUKI Gixxer 150., SUZUKI GSX-S125, SUZUKI VanVan200, SUZUKI GRASS TRACKER, SUZUKI V-STROM250, SUZUKI Gixxer 250, SUZUKI SF250, SUZUKI BURGMAN400, SUZUKI GSR250S, SUZUKI GSR250F, SUZUKI GSR400, SUZUKI GLADIUS650400, SUZUKI V-STROM650, SUZUKI GSX250R, SUZUKI GSR250, SUZUKI SV650, SUZUKI SV650X, SUZUKI SKYWAVE650 burgmanLX, SUZUKI KATANA, SUZUKI GSX-S1000
Reliable because it's DAYTONA.
I used it on my GSX1300R HAYABUSA.
The quality is quite good.
I bought this one because I thought it was not that expensive since it is Bar End.
View detail
Fits: KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R SE KRT Edition, KAWASAKI Ninja1000, KAWASAKI Ninja250, KAWASAKI Ninja400, KAWASAKI Z1000, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI 1400GTR, KAWASAKI GPZ900R, KAWASAKI Ninja ZX-14R, KAWASAKI Ninja ZX-14R, KAWASAKI Ninja250R, KAWASAKI NINJA400R, KAWASAKI Z1000, KAWASAKI Z1000 R EDITION, KAWASAKI Z250, KAWASAKI Z750, KAWASAKI Z750 S
It is massive!
I chose to customize the handlebar area to give it a customized look, and as part of that I changed the bar end. I bought a screw loosener and a hardener, but when I went to Motorcycle shop for other maintenance, I asked them only to remove the screw. I did not use the hardener when I installed it because it was too hard.
The impression after the change is better looks. Nothing more, nothing less. It's a matter of taste.
View detail
Fits: KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R SE KRT Edition, KAWASAKI Ninja1000, KAWASAKI Ninja250, KAWASAKI Ninja400, KAWASAKI Z1000, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI 1400GTR, KAWASAKI GPZ900R, KAWASAKI Ninja ZX-14R, KAWASAKI Ninja ZX-14R, KAWASAKI Ninja250R, KAWASAKI NINJA400R, KAWASAKI Z1000, KAWASAKI Z1000 R EDITION, KAWASAKI Z250, KAWASAKI Z750, KAWASAKI Z750 S
Used in Ninja 400 KRT color
Purchased to reduce handlebar shake.
I had it put on by Service at the store when I took delivery of the car, but they said that no matter how they did it, there would be a slight gap on the Axel side.
I don't mind, but those who do might not like it.
View detail
On the Grip end of SR400
In the case of SR400, the grip was originally short, and I replaced it with KIJIMA's hot grip, but the grip end was plastic and the quality was not good, so I changed it to this Bar End. As a result, I am satisfied with it. I do not expect much protection.
In the past, I have dropped a Bar End on other motorcycles while driving, and I think it is better to check the Rubber periodically to see if it is loose. It is a type of bar end that is fixed by compressing (?) the rubber, so it is advisable to check the rubber periodically for looseness due to deterioration, etc.
View detail
Mounting Kan Tan
There are two types of rubber to attach to the handlebar, and the thinner rubber was used to attach the handlebar.
Since the body is black, the bar end is also black.
I thought about adding Accent in other colors, but Black is nice and tight.
View detail
Fits: KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R SE KRT Edition, KAWASAKI Ninja1000, KAWASAKI Ninja250, KAWASAKI Ninja400, KAWASAKI Z1000, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI 1400GTR, KAWASAKI GPZ900R, KAWASAKI Ninja ZX-14R, KAWASAKI Ninja ZX-14R, KAWASAKI Ninja250R, KAWASAKI NINJA400R, KAWASAKI Z1000, KAWASAKI Z1000 R EDITION, KAWASAKI Z250, KAWASAKI Z750, KAWASAKI Z750 S
Good except for Bolt.
The weight was not so heavy in my hand, even though it is called "heavy weight".
It is a little heavier than the OEM Product, but it is certainly heavier than the OEM Product, which is a relief.
As seen in your impressions, Bolt is too long and cannot be installed.
Bolt length 60mm→replaced with 50mm to solve the problem.
Purchased at Home center for 1 pc 53 yen (Rose sale item).
Well, it was predictable, and an extra 106 yen won't hurt.
The texture is good, but we have to judge that the quality is no good when Bolt does not fit.
It is hard to understand why they are proudly listed as compatible models.
We are the 08MODEL of 1400GTR.
By the way, I think it is ★★★★★ except for Bolt.
View detail
Installation on gb350
Custom feeling and less vibration. Installation is very easy and can be handled by beginners. I gave it 3 stars because I have not used it for a while. View detail
I like the simple design
I installed it to match my Pro grip Superbike Grip. I installed the Bar End for the sole purpose of appearance rather than vibration reduction. I don't feel that the vibration is dramatically reduced, but I think the simple design is very good. View detail
Fits: HONDA TODAY, YAMAHA MT-09, YAMAHA MT-09SP, SUZUKI GSX-1300RGSX1300R HAYABUSA, SUZUKI GSX-S750, SUZUKI BURGMAN200, SUZUKI Swish, HONDA CB400SB, HONDA CB400SS, HONDA CBR400R, HONDA CB400FOUR, HONDA 400X, HONDA CB250R, HONDA CB250F, HONDA CBR250RR, HONDA CBR250R, HONDA CRF250RALLY, HONDA FORZA, HONDA FORZA, HONDA FAZE
Beautiful bar ends
I purchased my Daytona Premium Zone handle bar end weights from Webike expecting to receive a 'nice' set of bar weights to replace the bland OEM units from Honda. WOW, these aren't 'nice', they're beautiful! Weighty which is a good thing, but the machining and colour on these is fantastic. Fit is spot on, and changing them over from the stock units is straight forward. I only had them on the bike for a few days and I've had at least three people comment on these items. If you want a little 'bling', these are a must have. Highly recommended, and as usual, Webike is the only team to buy these from, especially for international purchasers. View detail
Fits: Others Hollow Universal Handle I.D. 14-19, HONDA GB350, HONDA GB350S, HONDA HORNET250, HONDA CB125R, HONDA ADV160, HONDA LIVE DIO-ZX, HONDA LIVE DIO-ZX, YAMAHA CYGNUS Gryphus, YAMAHA XFORCE, YAMAHA JOG125, SUZUKI GSX1400, SUZUKI KATANA, SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-R1000, SUZUKI GSX-S750, SUZUKI SV650, SUZUKI SV650X, SUZUKI SKYWAVE650 burgmanLX
Luxury Up
I think the weight of the system reduces vibration a little bit.
I like the design.
View detail
light weight
I ordered another Daytona aluminum billet bar end canard type to install on my Suzuki V-strom 1000 ABS as a replacement for old stock bar end which is heavier for high speed driving. I like the style of Daytona, it look modern, solid and light-weight. View detail
heavyweight
While I was looking for various products, I was told that they were in stock and in stock, so I liked the color, so I was curious. It was a very small tuning part, so I couldn't feel the weight. When I heard it directly, it was small in size, but it had a lot of weight. The quality level seemed high and it looked luxurious. It was just like gun metal. I like it. I recommend it. --------------------------------------------- ------------- While looking for various things, the price arrives and the inventory is said to be in stock, and I like the color. I like it Powered by Google Translator View detail
Perfect Match for Bar-end Mirrors
Used together with Daytona grips and bar-end mirrors,everything matches up and works perfectly. Absolutely necessary when using Daytona's bar - end mirrors. View detail
Bar End
I was not sure what color to choose, but I chose Red to match the color of Sticker.
Installation was easy and the appearance is satisfactory for me.
View detail