Reviews
Reduced vibration sensation
Replaced from YB125SP OEM.
With OEM, we replaced it with this Clip to deal with the vibration when the Speed continues over 60km.
It is comfortable to the touch even with bare hands and does not slide around too much even with gloves, so it is very easy to use.
The crucial vibration is also clearly reduced compared to the OEM, and the effect is likely to be felt even during long hours of touring.
View detail
Silver insert color is nice.
Installed in conjunction with Grip replacement.
Since the motorcycle has many plating parts on the body, silver was selected as an accent to the handlebar's black.
The color is good and the Silver looks good.
We considered heavier products, but chose this product with less thickness considering the width when parking.
View detail
Expected
I bought it for its looks and functionality, but there was an unexpected byproduct.
I have been using a Motorcycle Cover and have often caught the Mirror when removing the Cover. This Mirror is a fixed type, so it does not gap even if it is caught. At first I was annoyed that I had to use a tool to adjust the Mirror, but I personally like the fact that it does not move once the Mirror position is set.
The product is well made and can be recommendation.
View detail
Fits: YAMAHA DRAG STAR 400, YAMAHA DRAG STAR250, YAMAHA MAXAM, YAMAHA SR400
I am satisfied with the design and price.
Installed on SR400Final edition.
I liked the design of the OEM Mirror, but I had trouble with the narrow field of view, the angle of the Mirror was difficult to adjust, and the installation screws were loose, causing the Mirror to rotate downward while driving. After installing this product, the screws no longer come loose and the angle can be adjusted in a wide range of motion, so I have good visibility.
I like the Square Type design, which looks like early SR.
One drawback is that while it is easy to adjust the angle, the angle changes with the weight of the cover, so it needs to be adjusted each time before running.
The price is reasonable and overall satisfaction is high.
View detail
I will not shake.
I used to have a ZMirror from Mukawa, but when I was having trouble with the blurred mirror surface, I found out about this one and bought it.
The back of the car can now be seen clearly.
Mirror is also slightly colored and looks luxurious.
View detail
DL1000 V-STROM250SX exclusive DAYTONA Hazard kit installed
I was looking for a Hazard switch for my DL1000 V-STROM250SX, and when DAYTONA came out with a switch kit for the 250SX, I immediately went to Webike and bought it. As expected of a dedicated kit, there is no extra wiring, no cutting or pasting of wiring, and I was able to install it without worry. Now I can use the hazard lamp on the highway with no worries! Personally, I believe that motorcycles are safer when they are well lit and stand out. View detail
Fits: YAMAHA , YAMAHA MT-25, YAMAHA FZ8, YAMAHA FZ1, YAMAHA MT-03
MT-09 (2023) Used for
Used to install high sider bar end mirror on MT-09 2023 MODEL
Note that on Webik, the MT-09 compatible Heavy Weight Bar End is the M16 one. (Bar End standard has changed since 2021MODEL)
There is a non-heavy weight Yamaha M6Universal Product, but the difference is not only whether or not it is heavy weight, but also whether or not the fixed position can be fine-tuned.
The heavy weight one is not adjustable horizontally, and the angle is also stuck when the Mirror Bolt is closed.
Non-heavy weight products are fixed in the quantity position.:Pair (for Left and Right) The angle can be moved by hand even after the Mirror Bolt is closed.
Quantity:Pair (for Left and Right) I prefer Heavy weight because I am a person who wants to align with Exactly in （I prefer the Heavy weight (the texture is also better).
Also, if you want to put Mirror down either way, you need to face the sharp side outward to do it.
View detail
![[Highsider] Bar End Mirror VICTORY](https://img.webike-cdn.net/catalogue/images/105872/96693_TS.jpg)
Great sense of luxury.
For Triumph Thruxtonfe.
BodyPlastic products are also available, but this Gold genus is very high-end.
OEMs will be removed.
View detail
Hazard.
It is easy to install., No problem, good product! View detail
If Switch Refreshing,
It would be perfect if the Switch could be embedded! View detail
Fits: YAMAHA DRAG STAR 400, YAMAHA XSR700, YAMAHA XSR900, YAMAHA TRACER900, YAMAHA TRACER900 GT, YAMAHA BOLT, YAMAHA MAJESTY250, YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-25, YAMAHA MT-03, YAMAHA MT03
Just right Custom
I installed it on my YamahaBolt and it looks great with the Round Type, a little less visible than the OEM but not hard to see. View detail
Fits: HONDA CBR400R, HONDA CBR600RR, HONDA CBR650F, HONDA CBR650R, HONDA CB650R, HONDA CB250R, HONDA 400X, HONDA CB125R
Blue sky reflected in the Mirror
The purpose of purchasing the product was to improve rearward visibility when merging lanes.
Immediately after receiving the product, we started installation. First, check the approximate position by placing it on the OEM Mirror. After degreasing the mounting surface, peel off about half of the protective seal on the double-sided tape of the Mirror to be mounted, and slowly apply the tape,
One SideIt took about 5 minutes. The dimensions show a slight gap, but it did not bother me at all while driving.
I bought the Blue color this time and I think the color is good. I went out after noon and the sky was a little white, but when I looked through Mirror, I saw the reflection in the Blue sky as seen in the picture and it lifted my mood. Unexpected effect. I have not driven at night, but I feel that the visibility is not bad even when driving in the tunnel, and I do not feel dazzled by the headlight of the car behind me.
View detail
![[Highsider] Bar End Mirror FERRARA](https://img.webike-cdn.net/catalogue/images/68105/15164_TS.jpg)
Very good!
I used high cider a lot since I was headed there because it has a good texture and is easy to handle.
This product was less expensive than the rest of the Series, but the design matched the body of the car to which it was installed.
The bracket connected to the mirror is separate from the bar end and can be easily detached, so it can be used when driving on circuits, for example, and the angle can be easily changed or the top and bottom can be easily replaced.
The design and “y Casting feeling ” are also high Level, but the Variation of the Spec. and the ease of use are highly recommended.
You can be proud to say that you are a manufacturer in Germany.
View detail
![[Highsider] Bar End Mirror Adapter for YAMAHA 1 Vehicle](https://img.webike-cdn.net/catalogue/images/47841/96702_01_TS.jpg)
Fits: YAMAHA , YAMAHA MT-07
Quality is good, but may be difficult to match.
I bought this to replace the bar end mirror on my xsr900, and although the gap at the bar end is wider than the OEM product, I had no choice but to install their bar end mirror.
That is the only thing that is a little unsatisfactory. Other than that, the construction is satisfactory.
View detail
As expected of a DAYTONA product, Repair Parts are substantial.
The Daytona MultiBar mount end caps that came with the car from the time of delivery were missing from the beginning, and although they were painted, they were slightly rusted inside and I had been thinking for some time that they did not look good.
While buying another product on Webike. Speaking of which..." I remembered that I was looking for an end cap and found this product.
I bought it without any preliminary research and it was EXACTLY as shown in the picture.
MultiBar mounts made by DAYTONA would be mostly compatible.
There were two steps, the first step went in easily, and the second step was a tight Size so that it would not slip out.
I don't think it will come off so easily, because it is so tight that if you push it in with your bare hands with a lot of force, it will go in with a snap.
Thanks to the Repair Parts setup, we didn't have to bother replacing it, and we are happy with the much improved look.
As a side note, since the cap is for a standard round pipe, it can also be used as an end cap for furniture, etc.
View detail
Delicate product!
The Ideas is very nice but too moronic. The Torque wrench is specified for tightening, but would you use a Torque wrench to tighten it if it comes loose on the road? Ideas is good, but please improve it! View detail
Great cost performance!
I was looking for a Grip to install on my WhiteBlueGLADIUS650400 and found this.
The straight line design fits well with GLADIUS 650.
The grip is nice and moderately soft.
I have not run the distance yet, but I think it could be compared to PROGRIP.
This is a satisfying experience for a purchase price of a little over $1,000.
I can recommend it
At any rate, I have ordered another pc. in a different color.
View detail
Less blurring.
[How is it used?
Mounted on GSX-S750
Was the one you received as per Image?
As per Image. Firm and solid.
It is lower, but the visible range is the same as OEM etc.
If I could adjust it well, I could see a wider area than the OEM,
I'm not very good at adjusting Mirror ….
Was the installation difficult?
Installation itself is simply a matter of turning the hexagon.
How was your experience with it?
OEMMirror was getting scared fast, so I replaced it and it is better.
However, this too starts chattering at about 120 km/h.
[Included Parts:were they on?
Screws necessary for installation are included.
Right is also Opposite Thread Screw.
[Was there anything that disappointed you?
When you are scared, you really feel like you can't see anything.
Other items that would be helpful
Installation Point or hang
Right makes Washer a Quantity:1 pc. with a masquerade
There is no longer any interference with the OEM's Brake master.
But I don't feel like I'm stopping with Snap.
important point
Quantity:Pair (for Left and Right) Quantity as the same:2pc. When I purchased the Set, it was Shape of Right & Left Differ number.
Screw lock agent required.
View detail
I am satisfied with the quality function design!
I am very satisfied with the quality and functional design of the product, which also cancels out the vibration from the handlebar and ensures good rearward visibility! View detail
Fits: KAWASAKI Ninja1000, KAWASAKI Z900, KAWASAKI Z800, KAWASAKI Ninja1000SX, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja650, KAWASAKI Ninja400, KAWASAKI Ninja250, KAWASAKI Ninja ZX-25R
It's easy.
Seal for easy installation!
The light blue reflection alone has a custom feel!
I loved it.
View detail