Reviews
Fits: HONDA CBR400R, HONDA CBR600RR, HONDA CBR650F, HONDA CBR650R, HONDA CB650R, HONDA CB250R, HONDA 400X, HONDA CB125R
The view over Mirror.
I feel that my rearward vision has expanded, which makes me feel more secure when changing lanes, and the view behind me when touring is pleasantly reflected in the blue sky. The installation was not difficult, and even a small gap is not a problem while driving. I am very happy with the purchase. View detail
Fits: Others , SUZUKI V STROM 650
Handlebar vibration reduction
Yesterday, I went on a Touring of a little over 200 km to test this Bar End.
Overall, I think Handlebar vibration has decreased. In particular, I felt less vibration around 100 km on the highway.
View detail
Reduced vibration sensation
Replaced from YB125SP OEM.
With OEM, we replaced it with this Clip to deal with the vibration when the Speed continues over 60km.
It is comfortable to the touch even with bare hands and does not slide around too much even with gloves, so it is very easy to use.
The crucial vibration is also clearly reduced compared to the OEM, and the effect is likely to be felt even during long hours of touring.
View detail
Expected
I bought it for its looks and functionality, but there was an unexpected byproduct.
I have been using a Motorcycle Cover and have often caught the Mirror when removing the Cover. This Mirror is a fixed type, so it does not gap even if it is caught. At first I was annoyed that I had to use a tool to adjust the Mirror, but I personally like the fact that it does not move once the Mirror position is set.
The product is well made and can be recommendation.
View detail
I will not shake.
I used to have a ZMirror from Mukawa, but when I was having trouble with the blurred mirror surface, I found out about this one and bought it.
The back of the car can now be seen clearly.
Mirror is also slightly colored and looks luxurious.
View detail
Fits: YAMAHA , YAMAHA MT-25, YAMAHA FZ8, YAMAHA FZ1, YAMAHA MT-03
MT-09 (2023) Used for
Used to install high sider bar end mirror on MT-09 2023 MODEL
Note that on Webik, the MT-09 compatible Heavy Weight Bar End is the M16 one. (Bar End standard has changed since 2021MODEL)
There is a non-heavy weight Yamaha M6Universal Product, but the difference is not only whether or not it is heavy weight, but also whether or not the fixed position can be fine-tuned.
The heavy weight one is not adjustable horizontally, and the angle is also stuck when the Mirror Bolt is closed.
Non-heavy weight products are fixed in the quantity position.:Pair (for Left and Right) The angle can be moved by hand even after the Mirror Bolt is closed.
Quantity:Pair (for Left and Right) I prefer Heavy weight because I am a person who wants to align with Exactly in (I prefer the Heavy weight (the texture is also better).
Also, if you want to put Mirror down either way, you need to face the sharp side outward to do it.
View detail
Great sense of luxury.
For Triumph Thruxtonfe.
BodyPlastic products are also available, but this Gold genus is very high-end.
OEMs will be removed.
View detail
Hazard.
It is easy to install., No problem, good product! View detail
Fits: YAMAHA DRAG STAR 400, YAMAHA XSR700, YAMAHA XSR900, YAMAHA TRACER900, YAMAHA TRACER900 GT, YAMAHA BOLT, YAMAHA MAJESTY250, YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-25, YAMAHA MT-03, YAMAHA MT03, YAMAHA XSR700, YAMAHA XSR900, YAMAHA TRACER900, YAMAHA TRACER900 GT, YAMAHA BOLT, YAMAHA MAJESTY250, YAMAHA MT-07, YAMAHA MT-09
Just right Custom
I installed it on my YamahaBolt and it looks great with the Round Type, a little less visible than the OEM but not hard to see. View detail
Fits: HONDA CBR400R, HONDA CBR600RR, HONDA CBR650F, HONDA CBR650R, HONDA CB650R, HONDA CB250R, HONDA 400X, HONDA CB125R
Blue sky reflected in the Mirror
The purpose of purchasing the product was to improve rearward visibility when merging lanes.
Immediately after receiving the product, we started installation. First, check the approximate position by placing it on the OEM Mirror. After degreasing the mounting surface, peel off about half of the protective seal on the double-sided tape of the Mirror to be mounted, and slowly apply the tape,
One SideIt took about 5 minutes. The dimensions show a slight gap, but it did not bother me at all while driving.
I bought the Blue color this time and I think the color is good. I went out after noon and the sky was a little white, but when I looked through Mirror, I saw the reflection in the Blue sky as seen in the picture and it lifted my mood. Unexpected effect. I have not driven at night, but I feel that the visibility is not bad even when driving in the tunnel, and I do not feel dazzled by the headlight of the car behind me.
View detail
Very good!
I used high cider a lot since I was headed there because it has a good texture and is easy to handle.
This product was less expensive than the rest of the Series, but the design matched the body of the car to which it was installed.
The bracket connected to the mirror is separate from the bar end and can be easily detached, so it can be used when driving on circuits, for example, and the angle can be easily changed or the top and bottom can be easily replaced.
The design and “y Casting feeling ” are also high Level, but the Variation of the Spec. and the ease of use are highly recommended.
You can be proud to say that you are a manufacturer in Germany.
View detail
As expected of a DAYTONA product, Repair Parts are substantial.
The Daytona MultiBar mount end caps that came with the car from the time of delivery were missing from the beginning, and although they were painted, they were slightly rusted inside and I had been thinking for some time that they did not look good.
While buying another product on Webike. Speaking of which..." I remembered that I was looking for an end cap and found this product.
I bought it without any preliminary research and it was EXACTLY as shown in the picture.
MultiBar mounts made by DAYTONA would be mostly compatible.
There were two steps, the first step went in easily, and the second step was a tight Size so that it would not slip out.
I don't think it will come off so easily, because it is so tight that if you push it in with your bare hands with a lot of force, it will go in with a snap.
Thanks to the Repair Parts setup, we didn't have to bother replacing it, and we are happy with the much improved look.
As a side note, since the cap is for a standard round pipe, it can also be used as an end cap for furniture, etc.
View detail
Fits: SUZUKI Address125, HONDA VTR250F, HONDA VTR250, HONDA NC750X, HONDA NC750S, HONDA NC700X, HONDA NC700S, HONDA LEAD125, HONDA INTEGRA, HONDA GROM, HONDA DIO110, HONDA CBR600RR, HONDA CBR250R, HONDA CB750, HONDA CB400SF, HONDA CB400SB, HONDA CB250R, HONDA CB1300ST, HONDA CB1300SP, HONDA CB1300SF
Vibration countermeasure and dress-up
I chose Champagne gold to match the color of GROM's front fork. This Bar End is also installed on my previous NINJA400 and my current SUPER BOLDOR. 330g on the One Side is effective against vibration (I think lol) and even if it gets scratched, only the Cover can be removed, so it is cosmetically good. View detail
Great cost performance!
I was looking for a Grip to install on my WhiteBlueGLADIUS650400 and found this.
The straight line design fits well with GLADIUS 650.
The grip is nice and moderately soft.
I have not run the distance yet, but I think it could be compared to PROGRIP.
This is a satisfying experience for a purchase price of a little over $1,000.
I can recommend it
At any rate, I have ordered another pc. in a different color.
View detail
I am satisfied with the quality function design!
I am very satisfied with the quality and functional design of the product, which also cancels out the vibration from the handlebar and ensures good rearward visibility! View detail
Fits: KAWASAKI Ninja1000, KAWASAKI Z900, KAWASAKI Z800, KAWASAKI Ninja1000SX, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja650, KAWASAKI Ninja400, KAWASAKI Ninja250, KAWASAKI Ninja ZX-25R
It's easy.
Seal for easy installation!
The light blue reflection alone has a custom feel!
I loved it.
View detail
It is a good product
I installed it on my SR400. It is a good product, and the fact that it is Japanese Vehicle Inspection Correspondence is a high point. View detail
Fits: HONDA CB1300SB, HONDA CB1300ST, HONDA CBR250R, HONDA CBR400R, HONDA CBR600RR, HONDA CBR650R, KAWASAKI Ninja ZX-25R, KAWASAKI Ninja1000, KAWASAKI Ninja1000SX, KAWASAKI Ninja250, KAWASAKI Ninja250SL, KAWASAKI Ninja650, SUZUKI GSX-250R, SUZUKI GSX-R1000, SUZUKI GSX-R125, SUZUKI Gixxer SF250, YAMAHA FZ1 FAZER, YAMAHA YZF-R25, YAMAHA YZF-R3, HONDA CBR250RR
Parenthesis good & easy to slip through
Mirror like insect antennae of Ninja1000sx when slipping through,
It seems to hit the car's expensive Side-view mirror and is in the way.
Replaced within a week of buying Motorcycle.
Up and down Quantity:Pair (for Left and Right) The camera can be moved to a wide angle, so it is good to have flexibility. wide angle.
However, is it Reduction in cost or Bolt is all Color:Unpainted…
I painted it Black because it floats around from Body.
It's a little hard to see, but Parenthesis is better, and overall I am satisfied.
PS:I'm surprised that Motorcycle with Cowl these days is not mommy to Mirror exchange too!
View detail
Fits: Others , SUZUKI V STROM 650
Easy to install
Model:YZF-R25
I was about to buy Repair/Option Parts, but changed my order because Body was on sale for less. I have used it before to reduce vibration on a single cylinder and I am using it on my R25. Recently, I have been trying to increase or decrease the weight because I am concerned about the vibration, and when I made it heavier than 350g, my whole arm went numb, so now I am going to try 300g.
View detail
Fits: KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR1100RS, KAWASAKI GPZ900R, KAWASAKI W800, KAWASAKI W800STREET, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR750RS, KAWASAKI ZRX, KAWASAKI ZRX-2
For installation of Grip heater on GPX750R.
The OEM throttle pipe with many ribs had to have the ribs cut off in order to install the grip heater, which is a large amount of work, so I was not sure if it would fit. The part numbers of the wire and switch box are the same, and only the Throttle pipe part number has changed, so I bought it assuming that if the part numbers of the wire and switch box are the same, it would physically arrive.
The result is satisfactory for pontoon use.
View detail