Reviews
Exhaust SystemExhaust pipes that may be touched.
I bought this to prevent my heel from hitting the Exhaust pipe part of the Exhaust System. View detail
Fits: HARLEY-DAVIDSON Universal, HARLEY-DAVIDSON Universal
The over racing / 2-1 stuck to yamaha dsc400 Slash muffler It was exactly at the size. however, since it came out to a slight degree in respect of the heatproof and carried out, the heat resistance sheet was inserted under the muffler guard.
The over racing / 2-1 stuck to yamaha dsc400 Slash muffler It was exactly at the size.
however, since it came out to a slight degree in respect of the heatproof and carried out, the heat resistance sheet was inserted under the muffler guard.
View detail
spontaneity
It's not a bad idea to have a large size for a large number of people. View detail
Fits: HARLEY-DAVIDSON Universal, HARLEY-DAVIDSON Universal
I am using it with Heat Insulating Material.
It attached to the Exhaust pipe by preventing melting of Bike Cover.
Band seems to hurt Exhaust pipe
We have installed a Heat Insulating Material.
Heat that gets in the Guard was to the touch with the hand.
I think that using Heat Insulating Material is more effective.
View detail
Fits: HONDA CBR400R (2013-), HONDA 400X, HONDA CB400F (2013-), HONDA CBR400R (2013-), HONDA NM4-01, HONDA CB500F, HONDA CB500X, HONDA CBR500R, HONDA CB500F, HONDA CB500X, HONDA CBR500R
Design is anxious, but the effect is certain
I bought a hole in Waterproof Bag and I purchased it surely that I will not physically touch it rather than struggling to suspend Bag. I felt like I installed a suitable iron plate purchased at Home center from color and shape, so I painted it with Black's heat resistant paint.
Because of the test, it was high speed, we felt that it was getting warmer in the place I touched after I ran about 30 minutes on one way along the way down, there was never a hole to open. It may be different when running for a few hours, but for the moment I feel that it seems likely that it will not become too nervous to touch the exhaust system of Side bag.
Installation is troublesome. It is good to preliminarily loosen the Heat Guard and the mounting band temporarily and attach them to the Exhaust System and align the protection seats and the Band while tightening the Band.
View detail
Fits: HARLEY-DAVIDSON Universal, HARLEY-DAVIDSON Universal
Easy installation
I changed to OEM's second-hand Exhaust System in certain Oaksu, but I bought it because Guard was removed for some reason.
It was better that you could easily install it because it was better than not being there.
I thought that it would be a bit cheaper.
View detail
Fits: HONDA CBR400R (2013-), HONDA 400X, HONDA CB400F (2013-), HONDA CBR400R (2013-), HONDA NM4-01, HONDA CB500F, HONDA CB500X, HONDA CBR500R, HONDA CB500F, HONDA CB500X, HONDA CBR500R
Rear back Required for installation Items
Rear back is essential for installation. Installed by burning and dissolving Bag. Of course it will also prevent burns in the case of Tandem. Installation is a little Large strange by itself, but there is no problem. View detail
Fits: YAMAHA Dragster 400, YAMAHA Dragster 400, YAMAHA Dragster 400 Classic, YAMAHA Dragster 400 Classic, YAMAHA Dragster 400, YAMAHA Dragster 400 Classic
Exhaust System per exchange
I changed the Exhaust System to Other Company Product. Rubber part of shoes, LeatherPants etc. We melted with heat, to prevent sticking to the Exhaust System, we got three in total. Rear exhaust pipe part was bent and processed. The feet are hot even if you attach the Guard. The product itself feels a bit short Length. Easy maintenance of Exhaust pipe.
Well, I think that it is an essential item for exchanging the Exhaust System. Depending on the type of car.
View detail
Fits: HONDA CBR400R (2013-), HONDA 400X, HONDA CB400F (2013-), HONDA CBR400R (2013-), HONDA NM4-01, HONDA CB500F, HONDA CB500X, HONDA CBR500R, HONDA CB500F, HONDA CB500X, HONDA CBR500R
Firmly Guard
Guard the package firmly. Off-road vehicles are difficult to install Side Back without this. It feels like it's okay if the price is cheaper. Function is enough. View detail
Fits: YAMAHA Dragster 400, YAMAHA Dragster 400, YAMAHA Dragster 400 Classic, YAMAHA Dragster 400 Classic, YAMAHA Dragster 400, YAMAHA Dragster 400 Classic
It is used for VF750F. A Muffler guard is found and purchased although the Back step and the Multi-step of the company were also considered with if interference and a Boots are burned and a Super trap muffler and a Boots do not carry out somehow. If
It is used for VF750F.
A Muffler guard is found and purchased although the Back step and the Multi-step of the company were also considered with if interference and a Boots are burned and a Super trap muffler and a Boots do not carry out somehow.
If
direct does interference prevention and processing of, it could use, or bending was carried out to ? and it has attached.
direct interference is also lost -- a Boots -- 々 -- it is comfortable.
Although it was a thing made from the
STAINLESS STEEL and there should just also have been Black specification .. Satisfied.
View detail
Fits: HONDA CBR400R (2013-), HONDA 400X, HONDA CB400F (2013-), HONDA CBR400R (2013-), HONDA NM4-01, HONDA CB500F, HONDA CB500X, HONDA CBR500R, HONDA CB500F, HONDA CB500X, HONDA CBR500R
[Webike Monitor] Tandems were equipped. After running a few, even if touched by the hand, it did not get hot at all. A Side bag etc. are attached satisfactorily. As products, because it is made from the Aluminum, he has a cheaper feeling.
[Webike Monitor]
Tandems were equipped.
After running a few, even if touched by the hand, it did not get hot at all.
A Side bag etc. are attached satisfactorily.
As
products, because it is made from the Aluminum, he has a cheaper feeling.
Considering the
price, it may be such a thing.
View detail
Fits: HONDA CBR400R (2013-), HONDA 400X, HONDA CB400F (2013-), HONDA CBR400R (2013-), HONDA NM4-01, HONDA CB500F, HONDA CB500X, HONDA CBR500R, HONDA CB500F, HONDA CB500X, HONDA CBR500R
It is the impression of silencer heat guard long-term use of DAYTONA. It was used by VTR250, BALIUSII, and FZ1FAZER for protection of the prevention from a burn of a tandem, and a muffler. Although it is suiting an outside-diameter 95-145 pie cyli
It is the impression of silencer heat guard long-term use of DAYTONA.
It was used by VTR250, BALIUSII, and FZ1FAZER for protection of the prevention from a burn of a tandem, and a muffler.
Although it is suiting an outside-diameter 95-145 pie cylinder type silencer, it has attached to the LOCK-ON type variant silencer of nojima in FZ1FAZER.
[Using feeling] - texture A guard is the same aluminum as a one-yen coin.
Texture is not good.
I want you to sell buff processing and the thing which carried out anodized processing.
Stay is glossy so that it may be a product made from a stainless.
There is also no manufacturer logo and it is too simple.
The sticker is stuck and used in FZ1.
- Weight/durability Weight is light.
There is also no aged deterioration and it is durable.
- Attach. A hezagonal wrench and a driver are needed.
Attachment is also easy about time required 30 minute.
- In addition to this It does not get hot like a muffler appropriate for a heat guard.
Damage was reduced although the muffler had been thrown by the mounting state.
[Problem] If it removes after carrying out long time use, dirt will remain in the form of a band.
On the occasion of a carbon muffler, the small crack remained in the form of the band.
I think that it is the cause which has been thrown in the state where it equipped.
[The last] In the direction which attaches a motorcycle cover, a crevice is made between mufflers.
Therefore, it becomes the configuration of being hard to melt.
View detail
Fits: HARLEY-DAVIDSON Universal, HARLEY-DAVIDSON Universal
Since he wanted to unify through the whole, it unified by the product made from a daytona. It is satisfied with the same brightness as plating of DORASUTA of every parts.
Since he wanted to unify through the whole, it unified by the product made from a daytona.
It is satisfied with the same brightness as plating of DORASUTA of every parts.
View detail
Fits: HARLEY-DAVIDSON Universal, HARLEY-DAVIDSON Universal
since the punching muffler guard of DAYTONA was attached to one muffler -- in one more, it is wearing about a plain daringly!! punching -- the same -- a price -- CHITO -- it is high. It comes out and they are four stars.
since the punching muffler guard of DAYTONA was attached to one muffler -- in one more, it is wearing about a plain daringly!! punching -- the same -- a price -- CHITO -- it is high.
It comes out and they are four stars.
View detail
Fits: HARLEY-DAVIDSON Universal, HARLEY-DAVIDSON Universal
It equips with a muffler guard in connection with having returned the muffler to the slash cut... Although it is variously, this product is purchased from fashionability!! Although it is a five stars when it is felt being easy to be splendid and ? price i
It equips with a muffler guard in connection with having returned the muffler to the slash cut... Although it is variously, this product is purchased from fashionability!! Although it is a five stars when it is felt being easy to be splendid and ? price is cheap to a slight degree ... View detail
Fits: HARLEY-DAVIDSON Universal, HARLEY-DAVIDSON Universal
Construction material, formation. A price is GOOD. The size was a cinch although it was used for the exhaust pipe part of XLR125.
Construction material, formation.
A price is GOOD.
The size was a cinch although it was used for the exhaust pipe part of XLR125.
View detail