Reviews
Baffle itself is a nice inconspicuous shade.
We chose this shade of product because it is embarrassing if the End Baffle stands out.
When actually mounted on Silencer, it is good that the BaffleBody is almost invisible in the shadows depending on the angle.
In fact, I would like to ride with a straight pipe too.
View detail
Used for SR400
It is effective to reduce exhaust noise, but the sound quality is not to my liking. View detail
Fits: Others
Effective for single cylinder Engines!
The motivation for purchasing the DAYTONA Inner silencer was that I was looking for an inner silencer that seemed to have a good ventilation because I was looking for a silencer that would be quiet when idling because I have to leave my car in idling condition for a little while to warm up, etc. I was looking for an inner silencer with good ventilation.
After much consideration, the one that seemed inexpensive and effective was DAYTONAInner silencer.
I didn't expect much effect until I installed it and listened to the exhaust sound with Engine on, but it was more effective in muffling the sound when Idling than I expected!
The sound quality is better than muffled, but I am satisfied with the sound quality, which is a little more mild with a high-pitched grating sound when the engine is blown and the engine RPM is increased.
This is a personal feeling, so just for reference... I think this product has a muffling effect on single cylinder Engines.
DAYTONAInner silencer was inserted into the exhaust pipe of the silencer outlet of the Mervyn's Exhaust System for SAVAGE 650.
View detail
Slightly muffled
[How is it used?
I'm wearing a Silencer that produces a moderately loud exhaust note.
Prepared in case of emergency.
Was the one you received as per Image?
Is that about right?
Was the installation difficult?
Simple and easy with just one Screw
How was your experience with it?
Idling time was not as quiet as I thought it would be.
When the Engine is blown dry, the bass range is quite muffled.
It feels quite quiet when driving, but the exhaust noise is very interfering and incredibly strange sounding.
[Included Parts:were they on?
Screw and Washer
[Was there anything that disappointed you?
None
View detail
Not much volume reduction. Might need to work on it.
I used Φ47 on a SR400 one-off muffler.
The image is after installation. You can see that the aperture is slightly narrowed at the back.
The construction is good and the Parts themselves are satisfactory.
It is Straight Type, not Interference Type, and the aperture is slightly narrowed.
Since the amount of Glass Wool is only a little apologetic, the muffling by the Glass Wool is hardly functional.
I wish there was at least twice as much because it is too little and blows right off the edge.
The main point of this product is that it has a larger diameter than a typical Chinese baffle, but this makes it less effective in muffling sound.
Even if the aforementioned Glass Wool is re-stuffed, the sound is Large-timed because of the caliber of the bore.
The exhaust energy of SR400Level is about 3db lower than that of SR400Level when this product is installed as it is (I wish I had measured it). Therefore, it is difficult to make an exhaust system that makes a lot of noise to be more powerful.
I think it would be quite effective for 125cc to 200cc with a little less Engine Displacement Volume.
If you want to use it for a larger Engine Displacement Volume, I think you can enhance the effect by putting two in series or creating an impulse in the middle like in the Illustration to eliminate the straitened state. The object itself is good, so it depends on the processing.
View detail
It is effective for the measures against the Megaphone Exhaust.
It is utilized for the sound deadening measures of GB250 CLUBMAN + external Megaphone Exhaust.
If the environment is surrounded by walls (e.g. Tunnel, Garageetc.) if it's the case
I hardly feel the effect, but when driving in town, I feel the effect! It was clearly successful in muffling the sound from before installation.
The crispness of Single is outstanding, so the enjoyment at the time of ON/OFF of Axel is kept.
When partial, it became a mellow BEET.
MJ needed to be changed in Normal cab+K&NPower Filter.
Throwing part can run smoothly only by the adjustment of PJ without going to the PJ change.
We have not measured whether or not it can be bused to the sound volume regulation, so we cannot answer that question.
It is only a feeling, but about 10% of the sound is muffled. (not db) I feel as if I have succeeded in
In order to maintain the muffling effect, it is necessary to replace the Inner Glass Wool periodically.
View detail
It's a bit muffled.
When I bought the external exhaust system, the sound was much better than I expected, so I bought it. The volume was very low and the sound was very good. I think the sound deadening effect can be achieved by installing it near the outlet. And the cheapest one is the best. View detail
halfway through
I used it for Full Exhaust System of PoshW1Type. Does it have some sound deadening effect? The degree. If you want to put it on, I recommend End Baffle made by DAYTONA because it can change the sound quality fundamentally and make the sound crisper than the treble because the bass sound that resonates to the belly of this exhaust system will be faded.
I tried to wrap the Glass Wool around it and install it, but it didn't go into Silencer because of the thickness of the Glass Wool (only one round roll, but it didn't go in).
The sound is completely a personal preference and sensation, so you can buy and wear this product and try it out to see what works for you since it's not that expensive.
View detail
For sound quality changes rather than muffling effects
It is used in the W1 type Full Exhaust System for Posh's W650.
The bass was too much for my liking, so I put it on to get a little more treble out of it.
"Zudododododod. From "Flap flap flap flap. The sound changes to a crisp, crisp sound.
I didn't really feel the muffling effect, but it sounded more like an older motorcycle than the W1, with a crisp sound similar to the SR400.
The W1 is π34,5 as opposed to π35, so there is a slight gap, so I wrapped Glass Wool around it to fill the gap. The result was more like my favorite sound.
View detail
It will be quieter.
It will be quieter, but the sound quality will change. It's a floppy sound, so you can either take the volume or the sound quality ….
The Baffle itself has a Black heat resistant paint job and yet the mounting bolts have been replaced by the The nut is welded in place, so there is no hassle in attaching and detaching it.
I've changed the whole Silencer to a quiet one now, so I don't use it.
View detail
It surely silences
w650, c1 type OEMExhaust System purchased for muffling vehicle inspection measures after centering.
Tighten the supplied Screw tight from the inside, drill holes in the Exhaust System None required.
I adjusted the outer diameter with a grade bracket so it is not suitable for a little Large.
It is a temporary measure to the last.
View detail
Effect Batch!
It will be super quiet.
Although pulling as it pulls while accelerating,
Idling and running will be quiet.
Torque at low speed comes out, and the running changes.
View detail
Cheap is attractive
I think that the function as Baffle is fulfilled. The price is too affordable.
Impression of installation was able to install with precision well with chitin.
Although I was concerned about the volume, I myself did not feel it much because the sound quality got slightly higher, but it was told that my fellows who were running together worked quite a bit of noise.
The exhaustion of the Exhaust System became considerably worse and valleys were made in the middle revolution zone.
However, it is the manners to ride in a noisy way - Since it is a Rule violation, let's take measures against chitin.
Finally I hoped that my choice would be to choose the inner diameter as well as the outer diameter but the outer diameter that fits my Motorcycle was only one item on this product.
View detail
There is a silencing effect
Exhaust System After an exchange, to an amazing sound. There are many people who are interested in your neighborhood.
I did not want to open a hole in the Exhaust System, so order according to the inside diameter, stop using the screw from the inside. Since it is different from the original use method, it becomes self-responsibility, but use it in the neighborhood, enjoying the original Sound removed after going out. However, in this method, it is necessary to process the screw, sweet tightening will cause the Exhaust System to fly up in dandruff, so again at your own risk!
Noisy items are noisy even if you are using this, but the sound got smaller as you feel unsatisfactory as you are running.
The dedicated Baffle Silencer is difficult to install if the Exhaust System can not be installed and the installation itself is also Large. In addition, the price of parts and labor will also be suitable for that price. If you are interested please try one time.
View detail
It became quiet.
I attached it to the AXIS Rapo Exhaust System.
Recently, acquaintances have been caught by crackdown, and I bought it to make it in mind just in case.
It got quiet as expected.
When leaving early in the morning at Touring, will you not have to worry about your neighbors?
View detail
Effective
Used for muffling of YOSHIMURAExhaust System for Initial Model GROM.
As a result of trying out variously, I was concerned about the durability of Glass Wool but this was the best sound deadening performance and sound quality.
Although it does not correspond to NORMAL, it is quiet enough and there is no performance deterioration in daily use.
Processing
Baffle Because the outer diameter is about 2 mm Small, it is 0. We wrapped 3 mm Aluminum plate 2 rounds.
I was worried about the scattering of Glass Wool so I rolled Aluminum mesh.
Since cheapness stands out when wearing it, I painted black on the place that can be seen from the outside.
View detail
I will mute so much.
I bought it for commuting Motorcycle. I got quiet when I put on Baffle, but the dropout was bad and the acceleration got worse. Is it to lower the volume, or to accelerate?.
The product itself has high accuracy, I think that the texture of heat-resistant Black is also good.
View detail
DAYTONA Silencer End Baffle
I installed it on Silencer of custom-made AKRAPOVIC of Slip-on Silencer. I am satisfied without a beeping sound.
It is a Manufacturer that can also relieve the price as well as the price.
View detail
rest assured..
Please be relieved! I'm attaching.
I do not know because it is already in the exit.
A little exhaust sound also became quiet and can be hurried without hesitation when hanging Engine in the garage in future times.
It is not a medium or high speed sacrifice or sole, and it is a feeling that I wonder if a low speed stickiness has gotten out a little.
The only trouble is that you can open the Screw stopper hole at the Silencer exit..
View detail
OK
I installed AKRAPOVIC's Exhaust System
I think that I think that various ways of attaching can be done since it can be attached and attached at the time of installation
View detail