Reviews
Fits: HARLEY-DAVIDSON Universal, HARLEY-DAVIDSON Universal
Not suitable for painting.
In a completely unnecessary place as a Heat Guard.
It is installed at One point.
On Material, even if the contractor scratches the material considerably, the groove is not so good.
The paint was crystalline and did not shrink.
I don't think it's the right choice; it's been in use for about two years.
I also managed to get a crystal coating that didn't shrink.
It is starting to peel.
View detail
I am convinced because of the reasonable price.
It's inexpensive and not very effective at muffling sound.
I am satisfied with the quality as it is made by a well-known manufacturer.
View detail
Unobtrusive self-satisfied products
Purchased at Historic CABTON Exhaust System Design
The sound is not so loud, OEM+α only about
I don't feel that way about the Torque drop, but I don't feel that way about the Power up either I don't think it's a full range Torque&Power up
As other imprecisions, you can't hear the sound of the Exhaust System when the speed goes up
The included Gasket was crushed, so points were deducted
If you want to be assertive, this is not for you
View detail
Good replacement, doesn't sound that great.
Overall, I think it's a good replacement if stock exhaust is damaged, but I would not 'upgrade' to this. + The part fits perfectly on sr400, no modifications necessary! + Shipping was VERY fast + Looks great! + Pulls a littler better. - It sounds very soft. After reading other reviews I thought it would sound better, but it is barely louder than stock exhaust. I bought it to get a louder sound so I wish I got a different one... - It does not come with an exhaust clamp! Make sure you have your own. View detail
It didn't go in
It was a little too big to use
You have to watch the size carefully!
It seems to be well made for a cheap product
I would have loved to have used it
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY
Large hands and Large success!
It is attached to Formula MONKEY 2007.
Impression after about 2000 km driving.
<Vehicle Spec. >
○ Engine
Takegawa17R Bore stroke up106cc
○ Mission
TakegawaTAF5-gears Cross Mission Kit (Super Street)
○ carburetor
KITACOVM 26 Pilot Jet only # 12. Change to 5
○ Clutch
Takegawa Secondary side Special clutch
○ Ignition system
NORMAL
☆ regarding mounting
Even novices can be assembled if you look at the manuals. Joint part with Silencer, there is no exhaust leakage from the exhaust manifold. However, exhaust leaks can be seen through the gap between the lidded stoppers at both ends of Silencer. Let's apply liquid packing.
When attaching OEMHeat Guard, tighten while adjusting the direction of rotation of Silencer.
☆ Idling sound
Bore up car also somewhat bigger than OEM obviously Large, perhaps quiet residential area, even in the early morning is acceptable range.
☆ When accelerating
Because this is also a Bore up car, pretty ursay. Especially, pops pops on the ear. There seems to be no occurrence of the type of Chatter sound of Exhaust System.
☆ When cruising
Sounds themselves are not uncomfortable with large ladies. However, the probability of being stopped is high.
☆ During deceleration
Besides being quiet
In order to improve the situation above, we made the following remodeling at your own risk.
The basic structure is a straight structure that silences with Silencer with Glass Wool wrapped around Punching pipe.
How far the end of the exhaust manifold has extended to about 70% of Silencer. Punching is available only in the vicinity. Of course Glass Wool in the place without Punching was like a brand new item. It is a wasteful way of use.
Since Glass Wool has a silencing effect on papa pac, at the entrance of Silencer,
Cut it and add Punching processing to the part which was not available. Glass Wool used POSH.
With this, when exhaust gas goes through Silencer, it should be silenced to the extent that it is disgusting.
result
☆ Idling sound
Almost no change.
Sound slightly rounded up.
☆ When accelerating
Unpleasant papa sound was reduced considerably. It is a passing score.
It seems that slow Torque is not sacrificed either.
It seems that there is no place where it is getting worse from low speed to high speed.
On the contrary, it does not say that it became like to turn well.
☆ When cruising
I can run comfortably.
It is quite a bit too quiet.
☆ During deceleration
Almost no change
Temporarily assembled and check it after traveling several kilometers
It seemed that exhaust gas Gas was running around almost all of Glass Wool and was silenced effectively.
In my case I got a target result, but Motorcycle and OthersSpec. In some cases, similar results may not be obtained. In case of being referred to, please take it self-responsibility to the last. (Because it can not be reversed)
View detail
The sound is quiet ...
It is an exchange from cheap lucky Exhaust System.
I did not struggle to install.
It looks good as well..
It's too quiet so it's chillin ...
But, it is Japanese Vehicle Inspection Correspondence in consideration of neighborhood troubles and age, and this is one of my choices for this Exhaust System.
I use it for Large things.
The sound is too quiet and I do not recommend it.
View detail
Fits: HONDA CBR400R (2013-), HONDA 400X, HONDA CB400F (2013-), HONDA CBR400R (2013-), HONDA NM4-01, HONDA CB500F, HONDA CB500X, HONDA CBR500R, HONDA CB500F, HONDA CB500X, HONDA CBR500R
Can be attached to irregularly shaped Silencer
I bought it before I can finish it because I improve standing gore.
Since it is not attached after it is installed, the effect is unknown.
The shape of Silencer was triangular but not circular, but it could be installed.
I think that it is good for people with baggage because it is warm place even after touching.
View detail
It is cheap and good.
I heard a little sound and I was concerned about the eyes of the neighbors so I tried putting End Baffle. I feel that the sound is getting smaller with a little sound. It was a correct answer.. View detail
Fits: HONDA CBR400R (2013-), HONDA 400X, HONDA CB400F (2013-), HONDA CBR400R (2013-), HONDA NM4-01, HONDA CB500F, HONDA CB500X, HONDA CBR500R, HONDA CB500F, HONDA CB500X, HONDA CBR500R
We protect the body and Back from the heat of Exhaust System.
When installing Side Back in an off-road car, the Side cover is pushed by the weight of Back, it makes contact with Silencer, so I tried purchasing this product.
The product consists of BodyPlate, Bracket, Bolt nut, Band, Protection Seat.
BodyPlate is a thick material : Aluminum has enough strength. Although others were also written with Impression, since the corner is standing at the end of the back side, when using it for occupant protection at Tandem, Fileetc. It seems better to do a chamfer with.
For Band, the diameter of the Exhaust System is not less than 95 mm and not more than 146 mm is conformity Size. In other cases, you will purchase Band separately and respond.
For mounting, fix Bracket to Plate with Bolt nut, then tighten up Bracket and Silencer with a bunt and fix it.
Body and fixed also Firmly, vibration etc during running etc.. It does not seem to be gapped at.
A little disappointing is that if Nut welded to Bracket it felt it would be easier to fit in the Large width. Mr. DAYTONA wishes improvement for the next product.
View detail
It is inconspicuous OK
As the Exhaust pipe exchange, OEM's Heat Guard ceases to attach, so I use it instead.
The price is a little expensive, but it is not as conspicuous as White Potatoes.
One in the image part was exhausted.
View detail
Fits: HONDA CBR400R (2013-), HONDA 400X, HONDA CB400F (2013-), HONDA CBR400R (2013-), HONDA NM4-01, HONDA CB500F, HONDA CB500X, HONDA CBR500R, HONDA CB500F, HONDA CB500X, HONDA CBR500R
Probably, it will be better to do by two persons, although one person can also attach. It is satisfied although it is somewhat cheap ^^
Probably, it will be better to do by two persons, although one person can also attach. It is satisfied although it is somewhat cheap ^^ View detail
Probably, ... made to become wet with water has uncanny decoloring (black) as explanation, and does not become useful as it is in it. Although it had written to explanation Let me become wet, it was washed in cold water and used until decoloring was subs
Probably, ... made to become wet with water has uncanny decoloring (black) as explanation, and does not become useful as it is in it.
Although it had written to explanation Let me become wet, it was washed in cold water and used until decoloring was subsided after all.
and when twisting, it gets loose rapidly from an end.
It ended up omitting fairly finally.
Exhaust-pipe 30cm curved after
-- die length is liable to insufficient also winding.
If it could be long to a slight degree, considering the price, it was felt as ?.
Although many things were written, since the purpose of the measure against heat was filled, it is *3 つ.
View detail
It purchases for burn prevention. Quality is so so.
It purchases for burn prevention. Quality is so so. View detail
Fits: HARLEY-DAVIDSON Universal, HARLEY-DAVIDSON Universal
Since it is metal, it may be unavoidable, but it seldom insulates. It is fairly hot if it touches.
Since it is metal, it may be unavoidable, but it seldom insulates.
It is fairly hot if it touches.
View detail
Fits: HARLEY-DAVIDSON Universal, HARLEY-DAVIDSON Universal
It attached to DS400 equipped with product made from OVER 2-1 muffler. Since there will be no crevice between an exhaust pipe and a muffler guard here not much while a crevice is made very well between an exhaust pipe and a guard as for the product ma
It attached to DS400 equipped with product made from OVER 2-1 muffler.
Since there will be no crevice between an exhaust pipe and a muffler guard here not much while a crevice is made very well between an exhaust pipe and a guard as for the product made from hurricane if it is called a difference although the same thing has come also out of hurricane, although appearance is good, it is fairly hot even from this guard.
Since attachment is easy, it is a recommend when mufflers are exchanged.
View detail
Fits: HARLEY-DAVIDSON Universal, HARLEY-DAVIDSON Universal
Since it has put on the parking area of an apartment, the motorcycle cover has always been hung, but it has melted very well with the heat of a muffler. Even if it sticks the sheet not melting, it will melt immediately in the contact carried out just
Since it has put on the parking area of an apartment, the motorcycle cover has always been hung, but it has melted very well with the heat of a muffler.
Even if it sticks the sheet not melting, it will melt immediately in the contact carried out just for a moment.
(The cheap cause also has a motorcycle cover) It purchased for the measure.
The kana which it is liable to youth SUKASUKA since it attached to the exhaust pipe part instead of a muffler portion, but is not so bad well as for appearance
effective for the time being -- it is .
View detail