Reviews
Silver insert color is nice.
Installed in conjunction with Grip replacement.
Since the motorcycle has many plating parts on the body, silver was selected as an accent to the handlebar's black.
The color is good and the Silver looks good.
We considered heavier products, but chose this product with less thickness considering the width when parking.
View detail
Great rigidity.
The pipe is thicker and has more fixed bolts than the OEM, so it is very rigid.:It comes with a Plastic Slider, so it will be cheaper in case of moss.
However, installation was a challenge. Since it is slightly gapped, I managed to install it by fine-tuning while loosening and temporarily fastening.
I thought it would take an hour to finish and started working on it at 15:00 and finished at 19:00. I think it was an individual difference.
The product is good and I am satisfied with the Large change.
View detail
Just the Right Quantity for Tire Replacement:Set
[How is it used?
I purchased this product to replace a SUZUKI/CHOINORI Tire.
This is the first time for me to exchange Tire by myself.:Set.
Was the one you received as per Image?
It was just as Image.
This Quantity:In addition to the Set, Air Valve Puller and Tire wax were additionally purchased.
How was your experience with it?
It was my first time to replace the tires.:Thanks to Set, we were able to successfully replace the Tire.
Lever was also Simple and easy to use, but Quantity:2 pcs is a little short, so I wanted to get another Lever with an irregular shape.
[Points to note]
I was careful not to damage the rim with the lever when replacing the tire.
How did it compare to other products?
There was also a Tire Lever from another manufacturer, but I thought this product would be sufficient since the frequency of tire replacement is not that frequent.
View detail
Fits: YAMAHA DRAG STAR 400, YAMAHA DRAG STAR250, YAMAHA MAXAM, YAMAHA SR400
I am satisfied with the design and price.
Installed on SR400Final edition.
I liked the design of the OEM Mirror, but I had trouble with the narrow field of view, the angle of the Mirror was difficult to adjust, and the installation screws were loose, causing the Mirror to rotate downward while driving. After installing this product, the screws no longer come loose and the angle can be adjusted in a wide range of motion, so I have good visibility.
I like the Square Type design, which looks like early SR.
One drawback is that while it is easy to adjust the angle, the angle changes with the weight of the cover, so it needs to be adjusted each time before running.
The price is reasonable and overall satisfaction is high.
View detail
Fits: SUZUKI Gixxer SF 250, SUZUKI Gixxer 150., SUZUKI Gixxer 250
Impression after 2 years of use
There are 5 different types of carriers for the Gixxer 150 that are always available, but others are too tough, too weak, too expensive, etc. This one is made of a sturdy material and is good for refilling. The others are too tough, too weak, too expensive, or too many other things, but this one is made sturdily and is good for refreshing.
The material is solid and does not shake even if a 40L~ear box is attached. I am generally satisfied with it.
But this is the point of … I dare to write!
Material is not very good, and even with the cover in place, the rain still soaks in and keeps it wet, so the rust is noticeable, especially in the cherubs that are written under the box. The rust is not noticeable if you don't look into the box because of the location.
The ? front side tip of the Cap is easy to remove. The front side was lost without my knowledge. The remaining Right Side can be easily pulled off by pulling with fingers. The Right Side is probably lost, but I think it got caught and fell off when I pulled it toward me to remove the Saddle Bag. One day, I found a black round disk on the Garage. I don't know. I found out when I was storing it. I pulled out the remaining parts on the Pipe with the broken lid and attached them with glue, but they seemed to come off again, so I used a chair cover instead.
?This is the best It's kinda…" I have a Spacer and a Carrier, but if left unattended in a downpour, water will definitely get inside. I think it is probably opening too much for the Saddlebag Support Plate that can be attached at the same time. I'd better think of a way to block it.
View detail
As expected
I have just purchased a Z125PRO to take out the power supply for DriveRecorderーetc.
D−UNIT has a track record of use in another motorcycle, and we believe it to be reliable. There are several types of D−UNIT, but since the Z125PRO has almost no space under the seat, we chose the D−UNITPlus, which looked a little smaller, considering its fit.
As expected, we had a hard time installing it, considering the position of the DriveRecorder, etc. Finally, we decided to put it on the frame on the Right Side, but it became quite difficult, so we will review it at a later date. As for the Attachment power supply to operate, I pulled out the terminal near the coupler for failure diagnosis and modified it to interrupt the wiring to get it. The wiring to connect to the battery is weak, and it bent easily when I connected it to the battery and screwed it in. I was able to attach it for the time being, but I am thinking of replacing it with a suitable one at a later date. This is a point that we would like the manufacturer to consider improving.
The power supply has one 7.5A Attachment power supply, two 5A Attachment power supplies, and one constant power supply. 7.5A has a Grip heater, 5A has a USB power supply and DriveRecorder, and the constant power supply has a Cycle alarm. As with the D−UNIT, each power supply has a smaller Bullet Type Terminal than the general ones, so the Female side can be inserted by pushing it in with a little force, but the Male side is loose and will fall out if the Female terminal on the electrical component side is not tightened. We hope that the manufacturer will consider improving this issue as well.
Since the battery is small in a small type car, I think it would be better to avoid moving them all at once, but for the time being, each of them can be moved.
I think it is possible to get power supply without necessarily using D−UNIT, by setting up Relay, or by interrupting Attachment power supply from Fuse, etc., but rather than adding Wiring and Relay to Prank and making a mess, I think that by using this However, we believe that by using this method, Wiring can be reflected and a stable power supply can be obtained, rather than adding Wiring and Relay to Prank and making a mess.
View detail
DL1000 V-STROM250SX exclusive DAYTONA Hazard kit installed
I was looking for a Hazard switch for my DL1000 V-STROM250SX, and when DAYTONA came out with a switch kit for the 250SX, I immediately went to Webike and bought it. As expected of a dedicated kit, there is no extra wiring, no cutting or pasting of wiring, and I was able to install it without worry. Now I can use the hazard lamp on the highway with no worries! Personally, I believe that motorcycles are safer when they are well lit and stand out. View detail
![[NATIONAL CYCLE:National Cycle]Vstream Windshield](https://img.webike-cdn.net/catalogue/images/75533/16971_TS.jpg)
Fits: HONDA PCX150, HONDA PCX
Windproofing, though.
As far as I have been able to find out, I think this item is the LARGEST as a windshield. (At the time of purchase)
I think the windproof effect is solid in the Large size range.
However, in the summer, when parked in the sun, the light was concentrated on the Screen and the inside of the Screen melted.
It is possible to countermeasure this problem by placing Towel or other material between the two, but be careful, as the entire Towel may burn if it is not properly placed.
View detail
If Switch Refreshing,
It would be perfect if the Switch could be embedded! View detail
Fits: Others
Orthodox USB port
[How is it used?
no problem
Was the one you received as per Image?
Wiring is also discreet and Refreshingly cohesive.
How was your experience with it?
I was able to charge my phone with no problem.
[Points to note]
I doubt that it will be Waterproof on rainy days.
Other items that would be helpful
Installation Point or hang
:Rare/old cars should be installed by a store you can trust.
View detail
![[Windshield SS Vehicle Kit Replacement Parts] Bolt Nut Set B](https://img.webike-cdn.net/catalogue/images/116615/91451_TS.jpg)
Fits: HONDA glom
Replacement of DAYTONA Screen
I was planning to replace the DAYTONA Screen I had installed on my DIO110 with a new one for my GROM, and I came across a site that had repair parts for the GROM bracket. I placed an order and was able to install it! 。 However, this product and DAYTONA91450 Bracket Set are required. Also, there is no instruction manual, so please refer to YouTube etc. View detail
Fits: その他 For import type calipers (BREMBO [Brembo] common for racing and street)
10mm diagonal is helpful.
AP racing's NORMALBreeder has rusted badly, so we replaced it. The size is 11mm diagonal, which is very rare in FOR JAPAN MODEL, so now we can use 10mm Spanner Glasses instead of MONKEY Wrench, which improves the workability. I'm satisfied with the new size.
This is a RECOMMENDATION because it is definitely easier to use than the NORMAL with the Breeder still at 11mm.
View detail
Fits: KAWASAKI ER-4n, KAWASAKI Ninja 1000, KAWASAKI Ninja 1000SX, KAWASAKI Ninja 400, KAWASAKI NInja400R, KAWASAKI VERSYS1000, KAWASAKI Z1000, KAWASAKI Z900, KAWASAKI Z900SE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS SE
economical
I bought the Oil Filter ahead of time because I will be replacing the Oil Filter at the next Oil change.
It is a great value and helps because it comes with the necessary Packing in addition to the Filter and you don't have to buy more.
If there are no problems after using it, I would buy it again.
View detail
The 6-point clamping is strong enough. But there are a lot of places to remove when installing.
Satisfaction with installation is ◎
The 6-point fastening with 4 seat rails and 2 tandem step holders seems to be strong enough.
The instruction manual says Top case is limited to 32L, but we installed 47L at our own risk.
Installation is a bit troublesome.
Seat Cowl, Rear Fender, Tandem Footpeg, Blinkeretc. wiring needs to be removed.
The instruction manual can be downloaded from the ManufacturerSite, so you might want to take a look at it before you consider it.
View detail
Fits: YAMAHA TRACER9 GT, HONDA CB1100EX, HONDA CB1100EX E Package, HONDA CB1100BLACK STYLE, HONDA CB1100, HONDA CB400SF, HONDA CB400SB, HONDA VTR1000SP-1, YAMAHA FAZER8, HONDA CRF1100L Africa Twin Adventure Sports, HONDA CB1100, HONDA CB1100 typeII, HONDA CB1100 typeII, HONDA CB1100 typeI, HONDA CB1100 typeI, HONDA CB1000SF, HONDA CB1000SF-T2, SUZUKI BANDIT1200 S, SUZUKI V-STROM1000, SUZUKI SV1000
Replace Red with Golden Pad
I have not been able to drive yet because of the rain, but I changed the pad as well as the Caliper OH!
I'm looking forward to running it. ('∀ `)
View detail
Fits: HONDA CB400SF HYPER VTEC SpecIII, HONDA CB400SF HYPER VTEC SpecII, HONDA CB400SF HYPER VTEC Revo, HONDA CB400SF, HONDA CB400SB, HONDA CB400SB, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER FOUR, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300SB, HONDA CB1300SB, HONDA CB1300SB, HONDA CB1100EX, HONDA CB1100EX, HONDA CB1100EX E Package, HONDA CB1100EX BLACK STYLE, HONDA CB1100BLACK STYLE
Nice...
I replaced it with a Sintered pad because the Brake squeal would not go away and it was less expensive and seemed more durable.
The pad before replacement came with an unknown manufacturer, so there is no comparison, but it works and does not squeal as usual. 。
Control is much better than I expected, and the effectiveness changes with the amount of force.
It seems to be a bit aggressive to Rotor, which is a concern, but it was a good decision to replace it.
View detail
Less blurring.
[How is it used?
Mounted on GSX-S750
Was the one you received as per Image?
As per Image. Firm and solid.
It is lower, but the visible range is the same as OEM etc.
If I could adjust it well, I could see a wider area than the OEM,
I'm not very good at adjusting Mirror ….
Was the installation difficult?
Installation itself is simply a matter of turning the hexagon.
How was your experience with it?
OEMMirror was getting scared fast, so I replaced it and it is better.
However, this too starts chattering at about 120 km/h.
[Included Parts:were they on?
Screws necessary for installation are included.
Right is also Opposite Thread Screw.
[Was there anything that disappointed you?
When you are scared, you really feel like you can't see anything.
Other items that would be helpful
Installation Point or hang
Right makes Washer a Quantity:1 pc. with a masquerade
There is no longer any interference with the OEM's Brake master.
But I don't feel like I'm stopping with Snap.
important point
Quantity:Pair (for Left and Right) Quantity as the same:2pc. When I purchased the Set, it was Shape of Right & Left Differ number.
Screw lock agent required.
View detail
Fits: HONDA CB1100, HONDA CB1100 RS, HONDA CB1300SB, HONDA CB1300SF, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER BOLD'OR SP
General Slider
The car was delivered with DAYTONA's Engine Guard installed.
Because I scraped it just by driving normally on a mountain road,
Changed to Slider.
I am concerned about Damage to the Motorcycle in the event of a fall.
View detail
SM LINEFender MD44 installed
As per the impressions of our predecessors, the MD38/44 can be installed without any body modification.
Reasonable price and VisualUp, no complaints!
However, in my case, I have prepared the following additional components
Spacer:6.2mm ID x 15mm OD x 6mm L (qty:4)
Bolt:M6 x 30 (qty:2)
Flat Washer:M6 x 22 (qty:4)
When MD38/44 is installed, the spacer thickness should be at least 6mm to avoid interference with the car body. The outer shape may be a little larger than 15mm.
It is fastened with 4 OEMBolt, but for some reason, Quantity:I also bought Bolt because each 2pc is a different length (my used one) and when I put Space on, the shorter one doesn't reach.
When tightening from the tire side, the bolt groove on the FenderBody is large, so the washer is also large. 22mm larger than the bolt groove will cause the washer to ride up.
For your information.
View detail
Fits: SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI V-STROM250SX, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125 G8, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125SS, SUZUKI ADDRESSV125LIMITED, SUZUKI VECSTAR125, SUZUKI VECSTAR150, SUZUKI GEMMA250, SUZUKI Gixxer 150., SUZUKI Gixxer 150., SUZUKI Gixxer 250, SUZUKI Gixxer SF250, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type SS, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman Basic
safety
The product is a Replace product from a well-known manufacturer, and of course, there were no defects.
It is often cheaper than OEM or in stock, so it would be good in that case.
Personally, OEM Product is the best, but Foot Motorcycle uses this one.
View detail