Reviews
So bad
I purchased this product because my 30 year old KIJIMA product started to rust.
The shape is different and it doesn't fit well. I have a FOR JAPAN MODEL E3, but is there a difference in the shape of the meter depending on the year?
No year model designation in the description.
It says that it focuses on the beauty of plating, but I think it is an inexpensive Chinese product that will not shine as brightly as KIJIMA products even if it is polished to a poor plating base.
We decided to re-plating KIJIMA products.
We purchased only the Upper Cover, but I think you should check the shape of your meter before purchasing.
View detail
Fits: HONDA CB650, HONDA CB750F, HONDA CB900, HONDA CB1100F
quality
It is a product, not a product, and I am surprised that Webike would sell such an inferior product as a product,
The product does not have the minimum quality required for the product (skinny, stretches after one use,)
The result is the same no matter who does it, since it is tightened by default Torque,
Are you sure you don't want to apply liquid Gas and install it? (There is no such instruction in the manual.)
After replacing 4 pieces, one leaked immediately, and the rest will leak soon after they heat up.
View detail
For when you lose it and can't do anything about it, or...
FCR Carburetor Body39Φ, used for KEIHINOEMJet needle.
OEM Clip does not get stuck in Pushing and spinning.
But this one is round and round and rattles up and down.
Description. Universal Product, but without vertical wobble. What if there's a "what if"?
Maybe it's not the Level I'm concerned about,
I am not inclined to use it as long as the OEM fits so tightly.
You should buy KEIHINOEM.
I bought it just in time to adjust shipping charges when purchasing OEM Parts,
Well, the shipping cost was zero at 360 yen for 6 pieces, so let's call that a good thing.
View detail
Fits: KAWASAKI ZEPHYR400, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750
Missing.
Packing error?
Can you send me two Red bars and a Bolt?
As you can see from the pictures, this makes no sense to install. Please take care of it.
View detail
CHINA is often a waste of Gold and time
I did not have high expectations for this inexpensive Mirror, but I bought it thinking that it would be large and durable for about a year, but it is completely useless.
The base was fixed without any problem, but the moving tip for fine adjustment was so loose that it did not fulfill the function of the Back Mirror.
CHINA is really Garbage these days. Please be careful.
View detail
Fits: HONDA CB400SF, KAWASAKI ESTRELLA, KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR750, HONDA SHADOW, SUZUKI SKYWAVE, SUZUKI Impulse, SUZUKI BANDIT, YAMAHA YZF-R1, YAMAHA XJR1300, YAMAHA TDM900, SUZUKI GSX-R750, KAWASAKI BALIUS, KAWASAKI ZRX400, KAWASAKI ZRX1200, KAWASAKI D Tracker, HONDA FORZA, HONDA HORNET
This is terrible…
When I received the product and took it out of the bag, there was an obvious and unnatural hole in one part. There was no debris, but it looked like it had been hit by something and had a hole in it.
I know it's a cheap part, but I wish they would at least inspect it properly. I didn't have time to return it, so I sealed the hole myself.
View detail
awful
Size is wrong. Bad plating, BALI is present. Cannot be installed. Lost money on a cheap product. All the effort was wasted.
You wouldn't treat it as a commodity, would you?
View detail
Fits: KAWASAKI CR Carburetor Large body|Small body
I bought 8 cards and I'm out of 5 ______.
It is an inferior product. At least Quantity:1 Set of 4pcs. is a good product I wanted … View detail
Bracket's Material is bad.
Screw Mountain couldn't fix it with a quick lick. View detail
Fits: KAWASAKI ZEPHYR400, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750, Others
worst case scenario
[Product Contents] Float packing:4 Float valve:4 PilotAir ScrewO-ring:4 Drain Bolt O-ring:4Quantity:I asked for a set but it only contains 4 Float packing:a scam. If you don't have time to put a magazine in there, check the contents! I need to hear from you. View detail
Fits: KAWASAKI CR Carburetor Large body|Small body
The Worst Gasket You Can't Talk About
The product was soggy when it arrived. The product was unusable as it seemed to fall apart just by touching it.
I didn't know whether to return it as a defective product or not, but I didn't want it to become a problem, so I threw it away. It was.
If you want to run properly with a CRcarburetor, I don't think you should buy one.
View detail
Fits: Others , KAWASAKI ZRX400, SUZUKI GS400, Others CRSmall body, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR400
The ZEPHYR750Normal cab is impossible to install, and it sucks
I found ZEPHYR750 OK as the vehicle type setting, so
I bought it, but when I tried to install it
The Out-side Filter hits the Frame, and
It could not be installed
I'd like to return it, but I've opened it all up
I'm crying myself to sleep
Normal cabs cannot be installed
The above is the worst one, because of the above
View detail
Huh ha Gap is there ... really it is star Zero
Used for SA16J JOG.
Result ... Can not use. It was nearly an Objection place. If you buy this, Emon's 4-pole Relay is sure. After all, I repaired using EmonRelay.
View detail
Fits: KAWASAKI BALIUS2, KAWASAKI BALIUS, KAWASAKI XANTHUS, KAWASAKI ZXR250R, KAWASAKI ZXR400R, KAWASAKI ZXR250, KAWASAKI ZXR400, KAWASAKI ZXR750, KAWASAKI ZZR400
Cheap things are dangerous
I bought it because it was cheap and I thought that I could fail. Other people said that if you stretch Rubber other people said you did not grow well but it ended in the end of the phrase and it failed as a result.
Just because it is cheap to purchase is dangerous. It is said that this is a waste of Gold.
View detail
Spec. Ambiguous & Coil Consumption current excess Large
I tried to use it for Yamaha 3KJ JOG, but the 7 A Fuse just after Battery flew.
Spec. Because it is not explicitly stated, I do not know whether it is a broken item or not.
It became a loss of money purchase.
View detail
Fits: HONDA CB400FOUR (water-cooled), YAMAHA XJR400R, HONDA CB400SF, KAWASAKI ELIMINATOR 250, KAWASAKI GPz400F/F2, KAWASAKI Z400FX/Z400J, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYRX, KAWASAKI ZR-7/S, SUZUKI BANDIT250, SUZUKI BANDIT400, SUZUKI GSX250S KATANA, SUZUKI GSX400S KATANA, SUZUKI GSX400, SUZUKI GSX400, YAMAHA XJR400R, YAMAHA XJR400, HONDA CBX400F, HONDA CBR400F, HONDA CBR250R
I think that it can not be used for CB 400SF
CB400SB (NC39) Used in.
Exhaust leak if attaching while considering something like Small.
It was obviously small as compared with the one of KITACO ordered at a later date.
CB 400 SF for compatible models (NC31,NC39) Although there are, I think that it can not be used in these Motorcycle.
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z400FX/Z400J, KAWASAKI ZEPHYR400, Others CRcarburetor, Others FCR Carburetor Bodycarburetor
Is it durable?
Impulse's Fuel Filter was exchanged, I tried to buy Hose for exchange. Hose is soft and easy to insert and remove, but it is easy to work, but Rubber's durability is low and when you pull out Hose a few days later, the inner Rubber got stuck. Hose was 1 m so I'm using a new connection for the time being. For the moment there seems to be no leak of Gasoline. I will purchase a famous Brand item at the next Maintenance.
View detail
Fits: KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI ELIMINATOR 250, KAWASAKI ESTRELLA, KAWASAKI GPz400F/F2, KAWASAKI NINJA400R, KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750, KAWASAKI ZRX400II, KAWASAKI 250TR, KAWASAKI D-TRACKER, KAWASAKI ZRX400, KAWASAKI ZRX1200, KAWASAKI ZRX1100
Oil resistance is too low - -
When I did Maintenance of Carburetor last Spring, I thought that it would be durable for OEM compatibility because Air Screw was airtight so it was a mistake to use it.
While driving around last autumn, opening Throttle to accelerate begins to sound like Knocking and the symptoms worsen further this spring. I was in trouble because I did not understand the cause, but after decomposing my carburetor daringly - - - The O-ring was deformed and crushed.
Apparently because the O-ring collapsed, it seems that the secondary air was sucked in from Air Screw, the air-fuel mixture became thin, causing Knocking.
When I replaced it with a new O-ring of OEM Product, I got no more Pitari and Knocking. (The number of revolutions of Air Screw is the same)
Although the OEM Product before exchange was somewhat deformed, it was not deformed severely so far, so it seems to be hard to resist oil resistance like the company's Float packing as well.
Periodically it will not be a problem to replace it, but since the price is about twice as much, purchasing an OEM product would not be a hassle..
View detail
Fits: KAWASAKI BALIUS2, KAWASAKI BALIUS, KAWASAKI XANTHUS, KAWASAKI ZXR250R, KAWASAKI ZXR400R, KAWASAKI ZXR250, KAWASAKI ZXR400, KAWASAKI ZXR750, KAWASAKI ZZR400
The dimensions are - - -
Friend's Bio's "Under-seat engine hall" Used for.
I tried it immediately, but it does not suit.
Small is here..
In this time, I hit Dryer,
While stretching by hand to avoid cutting,
I managed to get it in the groove. (It took quite a while)
After installation, there was no leakage bleed of fuel,
Because it is Packing, it gets thinner as it grows,
There is a possibility of it being cut off,
There is a fear that it becomes unusable.
I will not buy next.
View detail
Although it is Double ...
I bought it for use with Stop & Tail because it is Double Bulb. We had a lot of led and I was expecting, but I started the engine and the usual lights are just right ... but pulling the Brake lever gave me slightly brighter. With this, it is difficult to distinguish whether Brake is on, I think that driving with this is very dangerous. If you want to led in the meantime, I think whether it is reasonable because it is affordable ....
I bought various ledDouble Bulb, but this is the first time I have not seen any difference. Maybe it was Hap Gap.
If you are considering purchasing as a Stop ball, we recommend that you make it a different item.
View detail