Reviews
Maybe better than OEM….
Compatible Float Chamber Packing for FCR Carburetor Body.
The FCR Carburetor Body was originally designed for down draft, and the oil level is above the packing, partly because a horizontal float chamber was added later.
Because of this, after three years from new, the lamination will start to bleed a little bit from the joints.
My FCR Carburetor Body had become a 10 year old player and the seepage was getting worse, developing into a leak rather than seepage, so I replaced it.
It has been over a year since the replacement and there is no seepage at all.
I have no problems with the installation and even think it is rather better than the OEM when looking at the lack of blotchiness.
Well, I could have arranged a reliable OEM Product, but it would have been a hassle to go to a mass retailer and place an order with a young clerk every time. Was the FCR Carburetor Body 250cc? " "! No, it's a carburetor…" I didn't really want to go there because of the exchange that took place.
This product is considerably cheaper than the OEM, and the performance seems unmistakable, and I think FCR Carburetor BodyUser would be well advised to buy it while shopping at webike.
View detail
Fits: KAWASAKI Z500, KAWASAKI Z550, KAWASAKI Z400FX/Z400J
It was possible to use it without problems
It fit perfectly, as did the OEM Product. View detail
For FCR carburetors, can be used for a long time. View detail
Reasonable price
It is a component that is easily ruined.
It would be great to get this price.
View detail
CHERRY Cherry Head Cover Gasket Camshaft Cover Gasket
Compared to the ManufacturerOEM Product, there are no particular problems. The shape and material are fine. I would like to purchase again. Thank you very much. View detail
FCR
They are cheaper than OEM and seem to work fine. View detail
Clip easy to lose, cheaper than OEM!
Clip of FCR Carburetor Bodycarburetor that is often easily lost.
The price is fairly good, but this product is cheaper than OEM and can be used without any problems.
For inventory replenishment, spares, etc.
View detail
Fits: HONDA CB650, HONDA CB750F, HONDA CB900, HONDA CB1100F
quality
It is a product, not a product, and I am surprised that Webike would sell such an inferior product as a product,
The product does not have the minimum quality required for the product (skinny, stretches after one use,)
The result is the same no matter who does it, since it is tightened by default Torque,
Are you sure you don't want to apply liquid Gas and install it? (There is no such instruction in the manual.)
After replacing 4 pieces, one leaked immediately, and the rest will leak soon after they heat up.
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z400FX/Z400J, KAWASAKI ZEPHYR400, Others CRcarburetor, Others FCR Carburetor Bodycarburetor
Good and close to OEM. I would purchase again.
Good and close to OEM. Would buy again. View detail
Used to return air from Tokyo TowerImpulse's Fuel Tank and carburetor
I was looking for a replacement for the OEM Hose since it was discontinued.
I was looking for an Oil Resistant Hose with an inner diameter of 5mm and a thicker outer diameter, and this Universal Product came to my attention.
Needless to say, the reason for making the external shape thicker is so that the hose band can be tightened more effectively.
I used the OEM 8mm outer diameter and attached it.
I would like to use it for other Motorcycle Repair as it is very cost effective and I have some left over.
View detail
Fits: KAWASAKI Z500, KAWASAKI Z550, KAWASAKI Z400FX/Z400J, KAWASAKI Z400FX/Z400J
No problem.
I have purchased this product because OEM parts were available until about 3 years ago, but now they are no longer available. I have no problem using it. The durability of the product is not yet ready to be described. It would be great if you could at least supply the parts. View detail
For when you lose it and can't do anything about it, or...
FCR Carburetor Body39Φ, used for KEIHINOEMJet needle.
OEM Clip does not get stuck in Pushing and spinning.
But this one is round and round and rattles up and down.
Description. Universal Product, but without vertical wobble. What if there's a "what if"?
Maybe it's not the Level I'm concerned about,
I am not inclined to use it as long as the OEM fits so tightly.
You should buy KEIHINOEM.
I bought it just in time to adjust shipping charges when purchasing OEM Parts,
Well, the shipping cost was zero at 360 yen for 6 pieces, so let's call that a good thing.
View detail
Fits: KAWASAKI GPz400F/F2, KAWASAKI Z400FX/Z400J, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYRX, KAWASAKI Z400GP
COSPA is the best!!!!
I bought it because it was the cheapest.
No problems with quality, etc., and great cost performance!
View detail
Commonly usable
After running the FCR Carburetor Body on a vehicle that had been in long-term storage, it was still leaking fuel.
If it is OEM, you can't go wrong, but for Gasket, I wanted to try something at a good price.
It is normal. I bought two just in case.
If it leaks, it is Large sturdy and will not leak out once assembled. The most common problem with other brand products is that they absorb gasoline and expand and stretch, making it impossible to put them on.
Can I use it without any discomfort at all?
View detail
Fits: KAWASAKI ZEPHYR400, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750
Missing.
Packing error?
Can you send me two Red bars and a Bolt?
As you can see from the pictures, this makes no sense to install. Please take care of it.
View detail
Fits: YAMAHA XJ400, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJ550, YAMAHA XJ400, YAMAHA XJR400
Packing too thin
Two of the four sheets ripped easily when I took them out of the bag. I used the 2 that were usable, but no leaks. 。 If you open the Float chamber for the second time, you might burn it? View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z400FX/Z400J, KAWASAKI ZEPHYR400, Others CRcarburetor, Others FCR Carburetor Bodycarburetor
Not bad to look at.
It is inexpensive, but not badly made. Durability does not seem to be a problem. View detail
cheap
It is much easier than the OEM ones.
There were no leaks, so I don't know about durability, but considering it is disposable, I think it is a very good value.
View detail
It is cosy depending on how it is used.
Used in O/H of FCR Carburetor Body.
However, if the Float is soaked in Gasoline, it will expand slightly, so you will need to dry it out and wait for it to return to its original state, or make other adjustments when reinstalling it.
View detail
Fits: HONDA CB650, HONDA CB750F, HONDA CB900, HONDA CB1100F
More than OEMs …
Used for carburetor OH in RC04.
The OEM Product did not sit well in the grooves of the Float Chamber and in some cases required dotting with superglue, but this product was just the right size.
The material used may be fluororubber, which gives the impression of being solid, unlike the NBRs that are often used in inexpensive other brand products. Of course, the Leak test was no problem.
In OEM Quantity:Although it must be expensive because of the set sales, I am grateful that it is available at a low price.
View detail