Reviews
So bad
I purchased this product because my 30 year old KIJIMA product started to rust.
The shape is different and it doesn't fit well. I have a FOR JAPAN MODEL E3, but is there a difference in the shape of the meter depending on the year?
No year model designation in the description.
It says that it focuses on the beauty of plating, but I think it is an inexpensive Chinese product that will not shine as brightly as KIJIMA products even if it is polished to a poor plating base.
We decided to re-plating KIJIMA products.
We purchased only the Upper Cover, but I think you should check the shape of your meter before purchasing.
View detail
relatively large texture
I think the quality of the product itself is better than the price.
The size was larger than I wanted, so I sold it without installing it this time.
View detail
It is a cheap plating, but it is usable.
[How is it used?
Normal headlight has a Speedometer, so we decided to purchase it in order to change it to a separate one.
Was the one you received as per Image?
I can't complain because the price is low, but I feel the plating is cheap.
Was the installation difficult?
The installation itself is Bolt On, but the wiring is complicated. However, if you carefully reconnect the wiring, anyone can do it.
How was your experience with it?
It has been used for a long time with no particular problems.
Plating is thin or Rust appears, but it is unavoidable.
[Included Parts:were they on?
HeadlightWiringetc. is included.
[Was there anything that disappointed you?
Not particularly
I like the design of the ▼Headlight lens because it is Retro-chic and not a Reflector type.
View detail
Good response
The product arrived exactly as I had imagined. The only problem was that there was a slight defect, but I was thankful for the quick response after that. I would like to thank you again for your prompt response. View detail
exchange
I was using Blinker by replacing it with LED, but it seems that it sometimes does not blink due to vibration, so I replaced Relay with a new one.
The price was not that much, and after the replacement, it blinked without any problem, which was helpful.
View detail
Cheap and good!
This price for G18Amber is a good Large change.
Recommended for Clear blinker.
View detail
Classical Headlight with a slightly large size
[How is it used?
I chose this product, which is slightly larger than the Small Type, to store the wiring in the headlight of my XL250S.
Was the one you received as per Image?
For the Motorcycle Image, the Lens might be cooler if it were more classical, but I wanted a large size Case with wiring processing, so I am satisfied.
Was the installation difficult?
Wiring in the original Headlight was messed up and out of control, so I left it to the store. It is better to leave the electrical system to a store you can trust.
How was your experience with it?
The shape of the headlight also does not look out of place with the car body.
[Included Parts:were they on?
No problem
[Was there anything that disappointed you?
Yellow Bulb is more to your taste. It is a bit Classical and has some good qualities, but the White bulb may be more modern. I will consider changing the Valve in the future.
[Others]
For the price, it was a good purchase, well made and solid.
View detail
I changed the blinker relay because I changed the blinker to LED and it became a high flasher.
Blinker relay is also compatible with ZEPHYR1100. View detail
For vehicle inspection.
Blinker is Clear Lens and was purchased for vehicle inspection.
I was concerned about the quality of the product since it was very inexpensive, but the light came on without any problems with regard to use.
However, I think it is closer to Red than Orange.
View detail
Overpriced.
I use it for z1. Parenthesis is good and it is easy to see. View detail
awful
Size is wrong. Bad plating, BALI is present. Cannot be installed. Lost money on a cheap product. All the effort was wasted.
You wouldn't treat it as a commodity, would you?
View detail
It's good to use for cheap taste.
It's good to use for cheap taste. But the bike isn't strong enough, so if you fall, I think it's going to break. I think expensive products are good for people who can't use them. View detail
It was Yellow Bulb.
It is worth the price. Not bad, but it had a Yellow Bulb.
I don't care if it's Yellow, Purple, Pink, Brown, or Black. No, I don't like Black. I cannot see.
I wish I had specified it correctly. I can't believe they sell this stuff on Webig! I had to check three times to see if it came from Amazon.
View detail
VT250F (MC15) High flasher prevention
I've been using a high flasher for about a year, but I changed it while I was at it.
Relay is located on the back side of Battery.
The conversion kit is troublesome to find, so I'm Wiring by myself.
Plain Type Terminal, Branch Connector, Wire, Vinite and Tie Band are required.
There is no High flasher on the Meter, and the Relay sound is not heard in the Engine sound.
View detail
I used it to convert my KLX250ES to BlinkerLED.
I bought the OEM Blinker relay for my KLX250ES because it was 3 pole and it was cosmetically sound.
This Relay is a Material that comes with the OEMRelay.:Rubber Bracket and there is no part to fix it.
It is Large fineness compared with OEM.
I had a 110 Coupler 3-pole and a H4 Coupler left over, so I used Vinyl Tape, Heat Shrink Tube, etc.
Waterproofed Cable is made, connected and secured with Tie Wrap.
The front blinker of KLX250ES is 110 type 2-pole coupler and the rear blinker is Bullet Type Terminal connection.
The Indicator bulb in the Meter's Blinker must also be replaced with an LED or it will become a High flasher.
I am left with a bulb pulled out. ^ ^;
As others have mentioned, it only flashes once when Blinker is turned off.
View detail
Bracket's Material is bad.
Screw Mountain couldn't fix it with a quick lick. View detail
Sufficient performance
I bought this to coincide with the conversion of Blinker Valve to LED.
It installed without any problems.
The operation is stable after installation and I am glad I bought it.
The old fashioned Pushing Pushing Pushing sound was a surprise!
View detail
Shoddy stuff, I mean.
During the last screw-tightening of the car body installation, Bracket was torn off from the base! View detail
It's overpriced on the outside.
This time I removed the OEM blinker which is too big for Sr400 and I confirmed that Waterproof anti-vibration measures are strictly taken. In addition, the attached light bulb is only an additional thing, the light bulb of OEM was transferred because it became a high flasher, the measure against waterproof is only a form. The price is the price, so I don't say the luxury. We don't recommend it for large motorcycles such as Tada and sr. View detail
Eh! Is this a good price?
This is the price of a 23W with Color G18Valve
To be honest, I bought it because it felt fishy
It's just normal!
I can buy 10 or more of them in a 2-pack from another Manufacturer
If you are using Clear or Smoked lenses, you can use
I think that it will come in handy when Valve runs out of Large when you stock a certain number of
It's a Large thing, so I'll write again
Eh! Is this a good price?
View detail