Reviews
Moderately
The threaded part is wobbly and not of very good quality.
I can't complain because of the low price, but it is not something I would confidently recommend to others.
View detail
For old car style Custom, you need two!
[How is it used?
I purchased Reflector to make an old car style Custom.
Was the one you received as per Image?
It is somewhat cheap, but not a problem at all.
Was the installation difficult?
Since the bracket is an external bracket, we were able to install it by using a washer and bolting on the bracket.
How was your experience with it?
I initially installed them for appearance customization, but now I can drive with peace of mind due to the increased nighttime visibility.
[Included Parts:were they on?
There is nothing else.
Washer and mounting Nut must be poised.
[Was there anything that disappointed you?
The reverse side is steel, so it is likely to have Rust, but since it is the reverse side, it is not so much of a concern since it is hidden.
Cost-effective parts for old car customization, including ▼Yon Four.
The Image looks a lot more like an old car than I expected.
View detail
CHERRYCherry Universal Reflector Plate
This CHERRYCherry Universal Reflector Plate was a very inexpensive product to the extent of Big Ri so we had a little doubt, but when we look at the actual thing received at hand, it was a normal Universal Reflector.
Since it is Universal, it can not be installed unless you devise a bit of ingenuity. It's natural because it's not exclusive.
There was nothing to attach this CHERRYCherry Universal Reflector Plate to CRONOF 250 L of my ride HONDA, but somehow I wore a deck and round Orange Reflector reminiscent of the old old car of this CHERRYCherry Universal Reflector Plate Because I wanted it, I tried installing it somehow.
This CHERRYCherry Universal Reflector Plate is a cheap product as it is Big Ri so even if it is forcibly broken, the Shock Wound is Small so it was a reasonable place to install it.
If it was an expensive product, I would not be gambling to forcibly install it because it would be bad if it breaks, so I think that it was impossible to install the result.
It is a typical example in which a difference in whether it can be installed or not can be borne only by the difference in price.
This 100 yen Reflector is truly vulnerable so Reflector can be easily removed from Base.
After the Reflector was disconnected, the Aluminum foilSeal was pasted on the inner surface, and then repaired with Reellector and Base with Gel-like instantaneous adhesive, but it could be confirmed to be more than the reflex ability of expensive Reflector made by another company It began to reflect light around.
As you can see, this CHERRYCherry Universal Reflector Plate, which is 100 yen free to play without fear, is my good Toy (Lol)
In fact, it is implicitly installed in the Frame of an off-road car, but without any sense of incongruity, it seems like an OEM Reflector attached from the beginning.
Make this CHERRYCherry Universal Reflector Plate Motorcycle Quantity : Pair (for Left and Right) Once installed in the Frame on the side, although it may be my preconceptions in the atmosphere, it seems that it became a little old image of the old car as well, so I'm pleased with Large satisfaction.
When installing this decorating and round Orange color CHERRYCherry Universal Reflector Plate, it becomes a slow image, but since it is not actually a heavy weight, it does not affect the running at all.
.
View detail
CHERRYCherry Universal Reflector Plate
【What made you decide the purchase?】
If you are looking for Reflector that is Retro ticky Orange color and Large Kind Round Type, I found this CHERRYUniversalReflectorReflector.
Besides, it is 1 pc indeed. I jumped without thinking backwards cheaply saying 100 yen. (Quantity : 2pc. Set purchase)
【How was it actually used?】
It was indeed a cheap product, so the adhesion between the resin parts was fragile and it was broken down quickly, but since it was easy to disassemble it to Beauty, reassemble it firmly by yourself with high strength adhesive and fix it to Motorcycle Frame I installed it..
【Mounting was difficult?】
Nut comes with M5 Screw as the axis, so it was easy to install it on the Motorcycle using it.
【Please tell me the installation point and hang】
Before installation, it is a product that is easy to disassemble as mentioned above, so decompose once with his own hands before dropping parts by dropping it, then reflect the interior to AluminumSeal and then bond with high strength It is a product that can customize by taking advantage of weak adhesive strength and easy to disassembly weakens because Reflector ability will dramatically increase Reflector ability when reassembled with agent.
[Is there anything I was disappointed about?]
At first, when it was disassembled, it was closed to the bonding assembly of parts that were too fragile, but it was cheap 100 yen so I forgave it.
However, thanks to that, Customization was done. I am lucky..
【Hope for Manufacturer - Please let me know if you have any improvement points]
Although it is a strange story, maintain the characteristics and inexpensive prices that can be disassembled as they are. Please.
【Have you compared items?】
Because it is a Reflector product with too high Cost performance and customization, there are no products that can be compared elsewhere.
[Others]
It is not a product that is said to be cheap and bad.
For those who can decompose and paste Aluminum Reflective Seal on your inner surface and reassemble it, I think that it is a very delicious product.
This ReflectorReflector is not something to attach to Motorcycle a lot, so no matter how cheap it is I will not buy anymore (I do not need it) However, by all means it is a product I would like to recommend to everyone.
.
View detail
【Retro tick Reflector rounded in Large with Orange color】
Orange color round and large Reflector. Sounds good.. I have Retro feeling from old days and I like Large.
Some people may think that it is disagreeable, but those who have been riding a single passenger since long ago ...
I think familiar with a single car with a round Reflector rounded like this in Orange color.
I feel a retro feeling of sorrow drifts. I feel even nostalgia.
This CherryUniversalReflectorReflector is an item that makes me feel that way.
This CherryUniversalReflectorReflector is a structure whose price is very simple only for the price, but since it is making the necessary maximum Large limit, I am convinced to the satisfaction to the fullest.
In addition, since the structure is simple, it is easy to disassemble and repair, but since the Reflector part may be easily removed and lost, disassemble once to prevent the Reflector part from being dropped with a strong adhesive vibrator and re-wear it We will Recommendation to keep it.
Even if you drop it by any chance, this CherryUniversalReflectorReflector is very inexpensive so you can buy it again, but let's do it as it will not fall as ahead of time.
This CherryUniversalReflectorReflector does not come with a mounting base. In Reflector 's Reverse side there is only 1 pc of 5 mm Bolt in the middle. (With Nut)
The Reflector itself is very lightweight and its Bolt alone is sufficient for installation strength so it is possible to easily install with 5mm hole in Shroud and attached Nut.
Since I wanted to install on Retro tick, I attached this CherryUniversalReflectorRelector to Frame with METALBand as Base.
In truth, Image-like, Quantity of Front fork and Rear suspension : Pair (for Left and Right) I was planning to install this CherryUniversalReflectorReflector, but if it was installed with METALBand, it might be damaged, so I dared to install it on Frame.
Although only a cheap Reflector was installed, it seems that a little Volume feeling comes out and it seems that there is a slightly different Retro atmosphere like that of other similar model cars.
Anyway, this Cherry Universal Reflector Reflector is appreciated as the price is very cheap.
Why do not you use this CherryUniversalReflectorReflector to create a slightly different Customization feeling with others?
.
View detail
Ability Customization Reflector
【What made you decide the purchase?】
Large Orange colored Reflector.
I wanted this Size.
【How was it actually used?】
Retro is a nice circle Reflector.
【Mounting was difficult?】
It takes a bit more trouble than being difficult.
【Please tell me the installation point and hang】
As Mounting Base Material : We used Stainless Steel Band and attached Reflector to MotorcycleFrame.
[Is there anything I was disappointed about?]
There is not much strength of Reflector Body.
Reflector on the front side and Black side of the Reverse side easily detached.
【Hope for Manufacturer - Please let me know if you have any improvement points]
Since no adhesive is used, parts can be removed and RoseRose can be done.
Because it is a big deal, I do not want you to bond them one after another.
【Have you compared items?】
I tried to compare with other companies' Reflector variety, but shape - Of can Large - This CHERRY UniversalReflectorReflector is easy to handle, regardless of the price.
[Others]
As described above, this CHERRYUniversalReflectorReflector includes parts such as Reflector including Screws and it becomes RoseRose.
Before it installs this CHERRYUniversalReflectorReflector in Motorcycle, first decompose it into 4 parts of Reflector, Reverse sideBase part, Bolt and Nut.
Reverse sideBase Place the Bolt in the Bolt hole at the center of the part and fix it with the adhesive for a moment.
And cut and paste Aluminum Kitchen Tape into the inner side of the base of Black on Reverse side, then wear an instant adhesive on the circumference of Reflector and bond it to Black Base and reassemble it, as a product It also increases the strength and durability of the product to withstand use and reflective efficiency of Reflector also increases as AluminumKitchenTape is stuck inside and it got to reflect well with only a little light in the dark.
Because it is good that this CHERRYUniversalReflectorReflector is easily disassembled, it can be finished with a little remodeling as a more efficient and competent CustomizationItems, so if you are comfortable do not miss out, buy this CHERRYUniversalReflectorReflector and play with it Why do not you check it out?
Are you satisfied with your Motorcycle by adding a round Reflector with improved performance?
.
View detail
Cospa best ♪ Reflector
【What made you decide the purchase?】
Square Reflector is also good, but I was looking for an old Type Reflector that is Orange colored and looks a little Large.
This is Exactly.
【How was it actually used?】
Reflector's reflection capability is also perfect, it's a calm feeling Reflector.
I attached it and liked it further.
【Mounting was difficult?】
The degree of difficulty varies depending on where you install it in Motorcycle, but basically you can install it if the hole diameter matches.
【Please tell me the installation point and hang】
Since Reflector's Reverse side is equipped with Screw for installation, use the Nut and the seat Gold etc. separately so as to match the Size, take out the Gold object, attach this CHERRY UniversalReflectorRelectoror at an arbitrary position Can do.
[Is there anything I was disappointed about?]
Far from being disappointed, I am impressed with this quality at this price.
【Hope for Manufacturer - Please let me know if you have any improvement points]
As a matter of course it is expensive a little, but if there is an LED Blinker on the look of this Reflector I will buy even more.
【Have you compared items?】
Although the Reverse side is Seal or compared with various Reflectors, this CHERRY UniversalReflectorReflector was the most expensive result.
[Others]
Installation of this CHERRY's UniversalReflectorReflector in Motorcycle is basically easy work, but it becomes a very difficult story if it becomes Sense-like story such as where to install in Motorcycle.
Whether it can be mounted properly at the position where it is actually installed, there are not pits and gold objects properly there, so it is necessary to have appropriate technology and material tools.
If that happens, it may be quite large and strange work, so we recommend that you install this CHERRY UniversalReflectorReflector in a location that would be as easy to install as possible.
In order to install this inexpensive Universal Reflector Reflector of CHERRY, I think that it is not a good idea to multiply expenses several times as much.
When installing CHERRY's UniversalReflectorReflector, we recommend an easy installation place.
.
View detail
CHERRY★Universal Reflector Plate★
【What made you decide the purchase?】
Of course, is not it determined by the CHERRY UniversalReflectorReflector's discount price !? (Lol)
【How was it actually used?】
The price is cheap, but firm making and reflection of light in the dark are perfect.
【Mounting was difficult?】
Since 6 mm Screw is attached, it is only necessary to fit the hole diameter. it's simple.
【Please tell me the installation point and hang】
If you hold the Body at the time of installation and strongly turn it and tighten it too much, it will damage the Screw attachment part of Body, so it is necessary to set aside for installation.
If you think that loosening if you loose it, it is easy to fix it more easily if you use the Screw loosening prevention agent instead of strongly turning and tightening.
[Is there anything I was disappointed about?]
Nothing is expected ...
Anyhow, as you know, it is a low-priced item so it was a purchase with a doubtful viewpoint of cheap and bad, but it was a product with high quality that I expected to lose at all.
It is already Big Li.
【Hope for Manufacturer - Please let me know if you have any improvement points]
I am worried that Large is durable without raising the price.
【Have you compared items?】
I compared it with various Reflector products of Manufacturer called Guts Chrome.
This Manufacturer's Reflectors are also super price, but I chose Universal Reflector Reflector of this CHERRY with the same shape and the large price as usual.
[Others]
Orange colored Reflector, Rear suspension and Front suspension - When I get attached to BodyFrame, I feel like Retro feeling a little like the old car and I like it very much.
However, although the single car is an off-road car (Lol)
As it is called Universal, it comes with anywhere as long as it covers the hole.
Sometimes separately Nut or Spring washer - Za Goldetc. I think that there are times when it is necessary to install it by using, but you can install it without any particular difficulties. As expected, it is a Universal Product.
After all, it is appreciated that the price is cheap.
Even if various installation experiments can be done, even if it is strongly tightened and it breaks, it is easy to rebuild it again quickly, and it is very thankful that there is not enough Damage to Nani Wallet and Men Barrel. I am saved..
.
View detail