Reviews
Fits: YAMAHA MAJESTYS, YAMAHA SMAX (SG52J), YAMAHA SMAX (SG28J), YAMAHA SMAX (SG271)
It will be Stylish!
[How is it used?
It was adopted as we proceeded with the dress-up of various areas.
We have asked Motorcycle shop to install at BigPit inService.
Was the one you received as per Image?
It was just as Image.
How was your experience with it?
It looks very good and I am satisfied with it.
[Points to note]
It is a little bit difficult to install, as it requires an OEM Fender cut. If possible, it would be better to ask the Shop to do this for you.
How did it compare to other products?
I thought it looked more stylish and better than other Manufacture's products.
View detail
Fits: HONDA PCX125 JF28, HONDA PCX125 JF52, HONDA PCX125 JF56, HONDA PCX125 JF81, HONDA PCX125 JF84, HONDA PCX150 KF12, HONDA PCX150 KF18, HONDA PCX HYBRID 2AJ-JF84
Brake stopper
When parking a scooter in a tilted parking lot, be careful because of the lack of gears. Even beginners can easily install the Brake stopper and operate it with a single finger. This is the first product we recommend to prospective Scooter buyers. View detail
Fits: HONDA PCX160, HONDA PCX150, HONDA PCX125, HONDA PCX Hybrid, HONDA PCX e HEV
It is perfect.
Mounted on Pcx160.
The right hole for the switch box is a simple addition, while the left hole is re-drilled about 2cm outward from the OEM position. (5mm Drill) 。
The line WOUNDS somewhat, although I worked with care because the line is only lightly rubbed.
I installed High Solo at the same time and had no problems.
Very good product
View detail
18-year old BirdCity125 (SEC-1J) Fender Eliminator-ization of
I wanted to change the Fender Eliminator on my '18 BirdCity125 and move the RearCameraPosition on the DriveRecorder to the original Reflector position. I was also convinced that the size and design of the '17 BirdCity155 and the '18 BirdCity125 were the same, so I checked the specifications and looked at the rear view of both vehicles to make sure they were the same and purchased the kit.
The first thing that puzzled me when I received it was that it came with an LED License Plate Lamp.
I had ordered a KOSO Bracket with License Plate Light because I thought I had to prepare and install a License Plate Light separately when converting to Fender Eliminator! I had ordered a KOSO Bracket with License Plate Light, so I had to return that one!
When machining, the Fender is removed from the body and masked according to the Instruction Manual, then carefully cut using a blade for plastic or PPMaterial, and then file it with Paper No. 100 or higher to cleanly shape it.
For installation on the vehicle body, the License Plate is temporarily assembled, and holes are drilled after checking the position and levelness of the holes and marking.
The 7mm hole was specified, but I don't have one, so I used a 6mm drill and had no problem.
The holes drilled are also cleaned up with a stick File.
Wiring of License Plate Light is cut by Lamp side Limit of OEM License Lamp to use OEM Coupler and Wiring, and after wiring process, it is crimped to Female Bullet Type Terminal.
The wiring of the attached License Plate Light is also crimped to Male's Bullet Type Terminal, and since the wire is very thin, a solder is added to connect both.
The light came on safely when I installed it in the car body and turned on the main key to check the light.
Just to be clear, on the body side, Black is Minus and Blue is Plus.
On the License Plate Light side, Black is Minus and BlackWhite is Plus.
The wiring routing was done using the hole where the Reflector was originally attached, and the process was completed in the space on the reverse side of the Reflector.
After that, side cover, helmet in, etc. were all put back together, and this Bracket was finally combined with DAYTONA's with ReflectorLicense Plate Bracket and attached to the vehicle body to finish the work.
In summary, the License Plate Light is quite bright and the position of the light affects the RearCamera's image at night, making it appear bluish.
I have found that shading the tip of the camera lens with something that can be used as a flange will solve this problem, so I will take measures later.
I am very happy with the Refreshing Rear, which was heavy.
The drawback is that when the side cover is removed for maintenance or adjustment, the bracket is directly attached to the side cover, so it has to be removed, which increases the time and effort required.
As a supplement, it is not compatible with MODELs prior to 18.
Also, we do not know about BirdCity after Model change, so it is only BU54 (SEC1-J) Conformity with respect to (Diversion is possible.) Please understand that
View detail
It's cool.
I was wondering if you could do something about the Gold amount a little more. LOL! View detail
Fits: YAMAHA MAJESTYS (SG28J), YAMAHA MAJESTYS (SG52J), YAMAHA MAJESTYS 4- (SG52J), YAMAHA MAJESTYS 4- (SG28J)
High quality Backrest & Pillion Bar
[How is it used?
Tandem Time
Was the one you received as per Image?
As shown in the image, the red stitches match those of the Seat, which appears to be an OEM product.
Was the installation difficult?
Easy
How was your experience with it?
good
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
View detail
Useful on gentle slopes.
It is easy to let go of the brake when stopping uphill.
However, when the gradient becomes steeper, the weight of the car overpowers it and it moves backward.
View detail
the expendables
I change them regularly because they are consumable. View detail
Fits: YAMAHA SMAX, YAMAHA SMAX, YAMAHA SMAX, YAMAHA MAJESTYS
You don't have to have it, but it's definitely better to have it.
Mounted on MAJESTYS.
It is easy to install, I think STD Shape levers can be installed even with external levers. I use it with KOSO's Lever.
Parking brake cannot be operated with one hand.
Lock with the Right hand while gripping Lever.
It would be more convenient if it could be locked with one hand.
View detail
Fits: HONDA PCX125 JF28, HONDA PCX125 JF52, HONDA PCX125 JF56, HONDA PCX125 JF81, HONDA PCX125 JF84, HONDA PCX150 KF12, HONDA PCX150 KF18, HONDA PCX HYBRID 2AJ-JF84
pcx150 (KF18) Mounting on
I thought it was a little expensive, but I installed it because I couldn't keep my hands off the car when I stopped. The work is easy. 10Driver and Pliers (Lower Nut co-rotation stop) Use the screw. The screw of the shaft is removed, this product is installed, the screw of another purchase is installed, Nut is tightened, and it is completion. When both hands are released at the time of a stop with this, Parking lock is done. View detail
Repurchased for processing
I bought this again for my RAMAIR filter lid.
It's just right, both in thickness.
View detail
Very Refreshing.
My Motorcycle is not the year listed but it fits well. 2021 CB125R (JC91)
The heavy Normal fender has been refreshingly changed to a light 125cc look.
Large custom parts that can be transformed beautifully without destroying the atmosphere of NORMAL.
Blinker's Wiring is just attached as it is, but License Plate Light was a little troublesome because I had to process it by myself.
There is a Dent (Wound) that may have been attached when bending the Plate of the genus Gold at the time of production, but considering the total, I am glad I bought it.
Also, it gets pretty deep, so I wouldn't recommend it if you're driving in the rain.
View detail
ADIO A DIO Brake Stopper P Lever
ADDRESS V125 (CF46A) (K6) Installed on year:06-07.
The picture of the instruction manual is WhiteBlack and Small, so I stumbled at the place where I put the notch in the brake lever.
Once you temporarily assemble it, you will know where to put the notches.
A Phillips Screwdriver and 8mmWrench tool will do the job, but you will need a steel file for the notches.
View detail
I bought this to make my GSX-R125 more parenthesis friendly.
I bought this because I didn't like the OEM very large Fender and wanted a Fender Eliminator.
I chose this Manufacturer's product because it was the shape that I liked the most after comparing the installation pictures with those of other companies.
Needless to say, the Fender will be gone, so water will be rolled up and the back and Rear Sets will be dirty.
View detail
On the lid of the RAMAIR filter!
RAMAIR filter (For Twin cab) for the lid to be used on SingleCarburetor Vehicles.
We have cut a little by little with Small Scissors.
View detail
It's justice to look good.
I bought this as a Fender Eliminator to go with the stylish design of my newly purchased Special Knife Address110 for commuting. If you have a regular sander, air saw, electric Drilletc. or a regular maintenance person, you will have fun and complete the work in less than an hour. screw lock and SpringWasher are good to have ready. View detail
Fits: YAMAHA Cygnus X FI 09- (SE462), YAMAHA Cygnus X FI 09- (SE461), YAMAHA BW'S 17/8- (SED8J), YAMAHA BW'S125 15/11-17/7 (SEA5J), YAMAHA BW'S 16/02-, YAMAHA CYGNUS X (5-inch), YAMAHA CYGNUS X (4-inch)
Cool!
It looks so good.
And I'm happy with the intake noise!
It's the best!
View detail
Fits: HONDA PCX125 JF28, HONDA PCX125 JF52, HONDA PCX125 JF56, HONDA PCX125 JF81, HONDA PCX125 JF84, HONDA PCX150 KF12, HONDA PCX150 KF18, HONDA PCX HYBRID 2AJ-JF84
2020 PCX 150
Miss the parcel deliver to my house on 23 December. Today self collection at post office. I’m so happy that I able to fix onto my 2020 PCX 150. Thank you so much for the fast shipment. View detail
Fits: YAMAHA SMAX, YAMAHA MAJESTYS (SG28J) New Frame Shape, YAMAHA MAJESTYS (SG52J) New Frame Shape
Long Wheel Base Kit nowadays
You can get a stretched out Forme without sacrificing storage Space under the Seat and more! 。 Unlike the one-off long wheel base of a long time ago, it is OK to ride on the street. I think it is possible to get the balance between daily use and custom. 。 You need to make Fender Eliminator, Fender Eliminator Kit is also recommended to be made by Adio! 。 To install, it is necessary to remove the Cowl around the rear, remove and install the engine, and change the wiring. 。 The ride height was almost the same. 。
The straight-line stability increases considerably. 。 Most importantly, it looks good. 。 MAJESTYS riders on the street will look twice at you. 。
I've done over 1500km since installation and have had no problems whatsoever. 。
The custom feeling also increases, so I became more attached to it. I installed it by myself, but I think that the sense of satisfaction after installing it is high even if I pay for parts and labor.
View detail
Fits: HONDA PCX125 JF28, HONDA PCX125 JF52, HONDA PCX125 JF56, HONDA PCX125 JF81, HONDA PCX125 JF84, HONDA PCX150 KF12, HONDA PCX150 KF18, HONDA PCX HYBRID 2AJ-JF84
brake lock
The product I bought works well. I can park it with the side stand and take it to the lock on high quality slopes and descents, I recommend it, thank you dear seller The product I bought works well.I can park on the side stand and get the lock on high quality slopes and descents. translated by Google Translator View detail