Reviews
US Buyers Read First
2016 Yamaha Zuma USDM. The part is very good. The fit and finish is fantastic and the install is pretty straight forward. BUT if youre in the US, this part will remove your OEM license plate light, so what you will need to do is cut the bottom oval of the black plastic tail light surround. The models outside the US have this precut, but we only have the outline. This will allow the tail light to serve as the license plate light. If you look at the description pictures on the listing, you'll notice the light hole. ALSO, the part is for plates somewhere outside the US therefore the license plate screw holes do not match up, you will need to re-drill two holes closer to the middle of the plates. I got the kit that ustilizes the OEM reflector, but shortly after install, I cut that bracket off for a reflector delete. View detail
Fits: YAMAHA CYGNUS X (2-inch), YAMAHA CYGNUS X (3-inch), YAMAHA CYGNUS X (4-inch), YAMAHA CYGNUS X (5-inch), YAMAHA MAJESTYS (SE44J) (1YP), YAMAHA MAJESTYS (SE44J) (28S), YAMAHA MAJESTYS (SG28J), YAMAHA MAJESTYS (SEA5J), YAMAHA MAJESTYS (SED8J)
Isn't this nice?
Reasonable and affordable Image change is available.
The key cylinder is visible every time the engine is turned on, but I was concerned because the place where the key is inserted is a NORMAL color, like a …hmmm? The color of the key cylinder is like a skin color, and it is getting a little dirty, which was bothering me.
There are products that cover the entire surface, but I chose this one because it is cheaper and easier to apply. The color is Black, and I can't say for sure because I have my own preference for design, but I like it.
I am a little worried about the durability of the adhesive. I warmed it up a little with a fan heater and carefully degreased the key cylinder side before applying it.
View detail
Fits: YAMAHA CYGNUS X (4-inch) EBJ-SEA5J, YAMAHA CYGNUS X FI (SE461), YAMAHA CYGNUS X FI (SE462), YAMAHA CYGNUS X (4-inch) SED8J, YAMAHA CYGNUS X (Model 4) SEA5J, YAMAHA CYGNUS X (4-inch) 2BJ-SED8J
Nice price, but the shape is good.
OEMFender to be removed and installed Type
Refreshing the best on the market.
All the back must be removed from the Seat to install it.
Large oddity.
By the way, there is no manual enclosed on how to remove it, so if you can't do it, pay the labor charge and have a PRO do it for you.
Reverse side is bare Wiring, but there is a Fender on the Tire, so it may be Large sturdy.
View detail
Fits: YAMAHA MT-09 (2BL-RN52J)
Your hips are Refreshing
When installing it, you missed the large size torque wrench and hurriedly installed the I went to buy one. (Lol)
And in the OEM Nut, when installing the Bracket to narrow the blinker spacing, the OEM Nut I couldn't tighten it up and tried my best to find a Penetrating style Nut.
The double-sided tape used to install the License Plate Light is It doesn't seem to come with it.
Looks nice, looks great Parenthesis.
It was just as good as I thought it would be.
View detail
If you want to go Stylish, this is it!
Refreshing the Fender area of the CB250R
Fender Eliminator from 3Manufacturer as far as I know Kit is out, but I chose Adio's because it was the most Refreshing
There's nothing difficult to install, but this Kit allows you to install the license lamp You need to crimp the terminals yourself and you need Electric Works Pliers
It's very stylish and stylish as well because the long Fender is gone The only downside to this is that it's still pretty dirty
I only ride on perfectly sunny days, but even so, when I get off the Motorcycle, the Tail Not only the lamp, even the tandem seat is covered with small stains Parenthesis is good, so it's fine..
This product is a great recommendation for people who don't mind a little bit of dirt However, I can't recommend it to those who ride on a rainy day
View detail
It's changed!
I installed it on my LEAD 100
Two in the front fork, one in the rear suspension, and
I felt Front had changed with HaDrill
I've been picking up the fine Gap and getting through to the Handlebar
That's gone
Even Scooters are different, and I'm Big Li
By the way, I don't think there's enough Rear to experience it...
View detail
Refreshingly, it makes you look better!
I worked from the information on the Net
Blinker's Spacer installation is the hardest part
Other than that, it wasn't difficult
As far as quality goes, the quality of the paint is a little poor and peels off easily during the process
What I'm interested in is the angle of the License Plate
That's pretty challenging
View detail
Fits: HONDA PCX125 JF84, HONDA PCX125 JF81, HONDA PCX HYBRID, HONDA PCX150
Installed on JF81 PCX
To install, remove the entire rear cowl and use the license It is necessary to cut the resin of the Plate Light section, so it is necessary to use the ultrasonic cutter and It is more beautiful if you have File etc
After the installation, New Model PCX has a thicker rear tire Rear view is parenthesis good without complaint
It's completely visual
However, I think it would be more upscale if the Number angle was more subdued
The bad thing is that the Seat lock section will be completely empty, so if you try to run it on a rainy day, you'll be able to get the Muddy water will get into the box In addition, sand will bite into the grease in the seat lock section
You need to make your own lid from the inner fender side
View detail
Neatly organized around the rear
Installation is pretty Large weird If you have power tools "Cut" "Cut" I think you can save a large amount of time with the process of
If you can take the time, I think it's possible to use Saw and File etc. without power tools
Drilling is required for installation, so you need to have a drill
It takes a lot of time and effort, but you'll be thrilled when it's completed
Disassemble again by re-tightening the mounting screws when they come loose
I shudder to think of what I would do I wanted to have at least a screw loosening stopper included
View detail
Bolt is too suspicious
Before injection injection Bolt has used it
Even at over-the-counter sales, it is also a product that can be sold with confidence that it may be decided not to buy it after purchase by DIO
This time there are things that Reduce shipping fee is over 3,000 or more
I tried to buy it for Rear suspension
After all the ride feeling has improved somewhat.
Next time I will look at the opportunity and I will attach it to Front fork
View detail
Design and Size are good, but - - -
I got lost in L and M, but it was just good with M. but - - - Weak adhesion has come off from sharp corners. I am sorry I like ADIO's Logo. View detail
Angle is bad
I installed it because the OEMFender is running away.
Since machining is unnecessary on the car body side, installation is easy if you understand even how to remove OEM Fender.
After installation, Rear tire looked out from the back, the appearance improved..
However, the angle of Number is a bit too small, and I want to point it down about 5 degrees again.
(Actually, attention was paid to White bye) It may be good if you lowered Rear.
I ran about 8000 km, but there is no breakage or dropping out.
View detail
Fits: YAMAHA MAJESTYS, YAMAHA SMAX (SG52J), YAMAHA SMAX (SG28J), YAMAHA SMAX (SG271)
Processing is Large strange.
Changed from DugoutFender Eliminator to AIO.
Because the position of Number and Blinker's position were ideal for AIO.
Regarding installation, it is a storm of processing and fine adjustment .... It is cool if it is followed and there is satisfaction.
Also, the manual is too much About and the picture is hard to understand with WhiteBlack! It is better to refer to blogs carefully putting on Net and movies attached to YouTube.
Actually installing and processing, Rear Fender's processing is manual duty at Cut as ordered, but I also feel that it is better not to do Cut of Under Cover according to the instructions.
Under Cover can handle Cut only enough for the part corresponding to Number. I feel cut off when I cut it according to the instruction manual. From the back side it's all you want to enter rain with sky ska.
I used the waste material of Cut for the time being I buried the gap ...
This product is recommended for people who are familiar with Custom. Or you should leave it to Motorcycle shop.
View detail
Mounting on CYGNUS X
Rear surroundings refreshed.
The manual is small and it is very hard to see.
It is appreciated that we can reuse OEMFender as it is.
Drilling is necessary to install Reflector.
In terms of Cost I think that it may be a little cheaper, but I was satisfied accordingly.
View detail
Fits: YAMAHA CYGNUS X 13- SE44J (Japanese specification1YP), YAMAHA CYGNUS X SR 13- SE44J (Japanese specification1YP), YAMAHA XC125 XC125 SE465J (Taiwan Spec.), YAMAHA XC125 XC125SR SE465J (Taiwan Spec.)
A price is also handy and structure is also solid. attachment is also easy. The circumference of rear felt it refreshed. The splashes of mud of , however the rainy day are carried out to a sheet part...
A price is also handy and structure is also solid.
attachment is also easy.
The circumference of
rear felt it refreshed.
The splashes of mud of
, however the rainy day are carried out to a sheet part...
View detail
Fits: HONDA PCX125 first model (JBK-KF12), HONDA PCX125 first model (EBJ-JF28), HONDA PCX125 Late Model (JBK-KF12), HONDA PCX125 later model (EBJ-JF28)
Although a high grade feeling may suit as PCX, there is slightly regretting about an Opening of a sheet. I think that this product is goods good for compensating it. attachment is also messy -- it is easy. Although it will be large satisfactio
Although a high grade feeling may suit as PCX, there is slightly regretting about an Opening of a sheet.
I think that this product is goods good for compensating it.
attachment is also messy -- it is easy.
Although it will be large satisfaction when a price is 2 or about 500 yen if
difficulty is said.
View detail
Fits: HONDA PCX125 first model (JBK-KF12), HONDA PCX125 first model (EBJ-JF28), HONDA PCX125 Late Model (JBK-KF12), HONDA PCX125 later model (EBJ-JF28)
O Even if it does not make straight and the Handle which prevents a sheet from being flapped by good point and strong wind, and falling, using mind and the Helmet holder which exists pure are not in Seat-lock release
O Even if it does not make straight and the Handle which prevents a sheet from being flapped by good point
and strong wind, and falling,
using mind and the Helmet holder which exists pure are not in Seat-lock release (a few is raised upward) until sheet opening and closing possible
O point [ bad ]
- Get used (with [ since it is intact ] no problem).
View detail