Reviews
Situation used is difficult.
If it is used on a moped for commuting to work or school, it will be very effective, but if it is used for touring, I would be hesitant to use it. Of course, the initial effect of protection from the cold is very large.
However, in the case of Motorcycle, which has a lot of controls, there will naturally be parts that cannot be seen, no matter how transparent you make those parts, so you will be forced to operate almost like a Window shade Touch, so you will be afraid to press any buttons other than the Blinker. In case of rain, no matter how hard you try, water will come in, so some kind of device is necessary.
There is a Rubber aperture at the hand in/out for protection from the cold, which may be a turn-off for some people.
If you are nervous, the Laflow ones are easier to use.
In general, it would be quite useful for mopeds and OffMotorcycle.
View detail
It arrived today
Suddenly, the temperature turned to mid-winter and Grip heater &
Even with Winter Gloves, my fingertips freeze.
Purchased in a hurry!
I have used various Manufacturers.
I'm most concerned about durability.
The product seems overpriced.
View detail
Fits: YAMAHA Cygnus X, YAMAHA Cygnus XSR, YAMAHA Cygnus XC125, YAMAHA Axis Street, YAMAHA CYGNUS 125 [Cygnus] SV, YAMAHA CYGNUS 125 [Cygnus] SI, HONDA SPACY100 [Spacey], HONDA Sh mode, HONDA PCX150, HONDA PCX125, HONDA LEAD125 [Lead] (JF45), HONDA LEAD100 [Lead] (JF19), HONDA Dio110, YAMAHA Cygnus X, YAMAHA Cygnus XSR, YAMAHA Cygnus XC125, YAMAHA Axis Street, YAMAHA CYGNUS 125 [Cygnus] SV, YAMAHA CYGNUS 125 [Cygnus] SI, HONDA SPACY100 [Spacey]
Used as a cover for a Seat that has been unraveling at the seams over time.
Used for SPACY100 。 The largest size was specified as the conforming model, but when I put it on, I personally think that the smallest size would have been a better fit. However, the length (a little longer) is shrinking, the width will be tighter if the width is also shrinking, so this may be the way to go after all.
The texture is smooth and good, and even the partial barrel spots that were present at the beginning of the covering have been smoothed out after a while of soaking.
I think the cospa is reasonable.
View detail
Don't lose the supplied bolt!
I had originally installed it on a different Scooter (DioZX).
It didn't suit me, so I removed it and reused the one I had stored.
It was over 5 years old, but I thought it was sturdy and hadn't deteriorated much.
However, I lost one Bolt for fixing and it was difficult to find a substitute.
(It's an Exclusive Design Bolt, so it's not available on the market.
View detail
Cost performance is the best
I installed it on my AF67TODAY and the size is just right
Since the shadow of the Basket does not appear in the part of the headlight illumination
I am satisfied with it I'm satisfied with the durability
View detail
The task is durability
Quantity : 2pc. It is purchase of eyes eye. Around the top of Screw in about 3 years the details of the fine mesh have been broken. I think that it is probably aging deterioration such as vibration. I was using first hand treatment with needle gold or the like, but purchased to change it to a new one. Basic product, performance is no problem. View detail
Items as expected - Performance
I installed it in Address. Shopping with expected performance Spec. Address is Exactly.
It also has rigidity, easy to install, it will not bend even if you hit it a bit.
Price is too cheap enough Cost performance is not it.
View detail
It was a firm commodity for the price
Other people's reviews Included Parts : Although I was worried that there might be incompatible or not, I could install it without any problems on TODAYAF61 It was installed somewhat below so as not to interfere with the optical axis of Light View detail
Fits: YAMAHA Cygnus X, YAMAHA Cygnus XSR, YAMAHA Cygnus XC125, YAMAHA Axis Street, YAMAHA CYGNUS 125 [Cygnus] SV, YAMAHA CYGNUS 125 [Cygnus] SI, HONDA SPACY100 [Spacey], HONDA Sh mode, HONDA PCX150, HONDA PCX125, HONDA LEAD125 [Lead] (JF45), HONDA LEAD100 [Lead] (JF19), HONDA Dio110, YAMAHA Cygnus X, YAMAHA Cygnus XSR, YAMAHA Cygnus XC125, YAMAHA Axis Street, YAMAHA CYGNUS 125 [Cygnus] SV, YAMAHA CYGNUS 125 [Cygnus] SI, HONDA SPACY100 [Spacey]
It is good for Repair.
One day I met a disaster where Seat was torn by a knife or something while parking.
I will purchase this product because it will be peeled off immediately because it is repair sealed or not stretchable.
I could do the installation immediately, but the price of Wrinkle is much
Although I was giving up as appropriate, after a couple of days I got to the shape of Seat and I was satisfied with Repair
became.
I am playing the rain well, and without problems even in the hot weather
It is used..
View detail
Fits: HONDA SPACY100 [Spacey], HONDA LEAD110 [Lead] (JF19), HONDA Dio110, HONDA Shmode [sh mode]., YAMAHA CYGNUS125 [Cygnus]., YAMAHA CYGNUS125 [Cygnus] Si, YAMAHA CYGNUS125 [Cygnus] SV, YAMAHA Cygnus X, YAMAHA Cygnus X C125, YAMAHA Cygnus X SR, YAMAHA Axis Street, HONDA SPACY100 [Spacey], HONDA LEAD110 [Lead] (JF19), HONDA Dio110, HONDA Shmode [sh mode]., YAMAHA CYGNUS125 [Cygnus]., YAMAHA CYGNUS125 [Cygnus] Si, YAMAHA CYGNUS125 [Cygnus] SV, YAMAHA Cygnus X, YAMAHA Cygnus X C125
It seems that inspection at the time of shipment is not done.
Beige's Piping had two stains like Black Magic.
It is very dirty, conspicuous, like Manufacturer not inspected at shipment.
Because of the Universal Product, the installation feeling is not good.
Compared to material and price CP is bad, I can not recommend it.
View detail