Reviews
I am satisfied
Degrease the body side and the back of the rim, and use the supplied double-sided tape.
Was it four places? Just stick it on.
Like Headlight, I am a little concerned about the adhesive strength.
I would warm it up and cure it with Tape or change the Double-sided Tape.
The fitting was good and I am satisfied with the product itself.
View detail
Fits: MV AGUSTA TURISMO VELOCE, MV AGUSTA SUPER VELOCE 800 SERIE ORO, MV AGUSTA SUPER VELOCE 800, MV AGUSTA RUSH 1000, MV AGUSTA F3 RR, MV AGUSTA DRAGSTER 800, MV AGUSTA BRUTALE 800, MV AGUSTA BRUTALE 1000RS, MV AGUSTA BRUTALE 1000 SERIE ORO, MV AGUSTA BRUTALE 1000RR
Unfortunately, I can't Recommendation.
I put it on a BRUTALE 800RR MY22 MODEL.
When I first put Antiglare on and did a test run, I peeled it off because in strong evening sun conditions, I could not recognize any areas such as the Blinker display at all.
I peeled off the Antiglare and tried to use the Super clear, but there was a white discoloration in the center, as if it had been bent somewhere. I can't blame the Super clear because I may have stored it in a bad way, but I was disappointed that I paid 2500 yen for it and this was the result.
View detail
Fits: KAWASAKI ZZR250, KAWASAKI ZZR250, KAWASAKI ZZ-R250, KAWASAKI ZZ-R250, KAWASAKI ZXR250, KAWASAKI ZXR250, KAWASAKI ZZ-R250, KAWASAKI KR-I., KAWASAKI KR-1R, KAWASAKI ESTRELLA
To STAR
Looks the same as OEM Product. Good cost performance. View detail
Fits: HONDA APE 100, HONDA APE 100 TypeD, HONDA APE 50
Durability is difficult
It broke down right away. 。 It's a shame View detail
Same as OEM Product
Purchased due to lack of OEM Product.
The product is comparable to the OEM Product.
View detail
Fits: HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON FL system, HARLEY-DAVIDSON FX Systems, HARLEY-DAVIDSON FL system, HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON TOURINGFamily
It's broken
I installed it and drove about 80km and the needle stopped moving around 75km.
Stopping the system does not restore it to its original state.
Worst product I've ever seen. Lost my faith in them.
I wonder if you can replace it.
View detail
Meter panel not lit
MeterPanel is no longer lit, so the Panel's Quantity:I wondered if I should replace it with a Set, and decided to try replacing the Inverter for now and see how it goes. As a result, the light came on. View detail
Fits: HONDA CRF250L, HONDA CRF250RALLY50, HONDA glom
I can't help but notice the small Dust ….
There is no problem at all with the product itself, and I think it is a very good product if it is applied perfectly. When pasting, I degreased and wiped the surface in advance, and then gently aligned the product while pasting it.
The purpose of this product is to protect the surface of the Meter from scratches, etc. I would like to use it. I will use it as a protection for the surface of the Meter from scratches.
View detail
Fits: KAWASAKI Z H2, KAWASAKI Z900, KAWASAKI Z650, KAWASAKI Ninja 650 KRT EDITION, KAWASAKI Ninja 650, KAWASAKI Z H2, KAWASAKI Z H2 SE, KAWASAKI Ninja ZX-25R SE KRT EDITION, KAWASAKI Ninja ZX-10R KRT EDITION, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-10R, KAWASAKI Ninja 650, KAWASAKI Ninja 650 KRT EDITION, KAWASAKI Ninja 1000SX, KAWASAKI Z650, KAWASAKI VERSYS 650, KAWASAKI Z900, KAWASAKI Ninja ZX-4R, KAWASAKI Ninja ZX-4RR, KAWASAKI Ninja ZX-4RR KRT EDITION
Meter Protection
[How is it used? 24-hour (e.g. observation, operation (of a machine), care (of patient))
Was the one you received as per Image? Yes
Was the installation difficult? Ask for Motorcycle store
How was your experience with it? Effective
[Included Parts:were they on? None
[Was there anything that disappointed you? high
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Can be mounted on 65 with Small modification.
Since the one for JA65 was not available at the time of purchase, we modified and installed the one for JA55. It is a simple modification since it is just an expansion of M6 to M8.
However, the process of cutting the NORMAL Bracket becomes a bit cumbersome.
After installation, the Meter will be in the center, which will improve visibility and eliminate interference (rubbing) between the Accelerator Wire and the MeterShell.
Perhaps because of the low demand, the cosmetics are not very cost-effective. As one would expect, the price for a part of this size is...
View detail
Fits: HONDA MONKEY125, HONDA DAX125, HONDA CT125CT110 HUNTER CUB
KITACO MeterFilm MONKEY125
The installation position is Exactly, high quality, and I am satisfied with it. View detail
DAYTONA MeterFilm CBR600RR
The installation position is Exactly, high quality, and I am satisfied with it. View detail
Fits: HONDA LITTLE CUB, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB
Friendly Wiring relationship
Used for CUB.
The supplied Meter panel was not used.
Anyway, the Instruction Manual and structure related to Wiring are very kind. At first, I was working in a messy way, but I was impressed by the SMART design of the wiring, such as the Harness for taking out the rotation signal.
The instruction manual is well written at a level that anyone can install the product if they read it carefully, so even beginners should be able to install the product if they try their best.
View detail
Fits: HONDA GB250 CLUBMAN (GB250 CLUBMAN), HONDA GB250 CLUBMAN (GB250 CLUBMAN), HONDA GB250 CLUBMAN (GB250 CLUBMAN), HONDA GB250 CLUBMAN (GB250 CLUBMAN), HONDA GB250 CLUBMAN (GB250 CLUBMAN), HONDA GB250 CLUBMAN (GB250 CLUBMAN), HONDA GB250 CLUBMAN (GB250 CLUBMAN), HONDA GB250 CLUBMAN (GB250 CLUBMAN)
OEM Product suitability
I ordered NTB's Meter cable because I thought the cable was broken and the needle on the meter was not moving. I connected the Meter cable but of course the Meter needle did not move, so I had to look for a Meter gear. View detail
Fits: HONDA CB400 FOUR(Air cooled), HONDA CB400 FOUR(Air cooled), HONDA CB400 FOUR(Air cooled), HONDA CB400 FOUR(Air cooled)
I feel like you're right.
I feel like you're right.
can be done with a ponzu (Japanese sauce made of soy sauce and citrus juice)
View detail
Fits: HONDA CBR1000RR FIREBLADE, HONDA CBR600RR, HONDA CBR600RR
For Meter Protection
Purchased for Meter protection as per Title
It came with two sheets, AntiglareType and Super clearType, and I thought it would be nice to be able to choose the one I prefer.
Antiglare was selected for this project and Super clear was kept as a spare.
The accuracy is a little low and some parts are not fully covered, but it is acceptable. The view is not particularly different.
View detail
So bad
I purchased this product because my 30 year old KIJIMA product started to rust.
The shape is different and it doesn't fit well. I have a FOR JAPAN MODEL E3, but is there a difference in the shape of the meter depending on the year?
No year model designation in the description.
It says that it focuses on the beauty of plating, but I think it is an inexpensive Chinese product that will not shine as brightly as KIJIMA products even if it is polished to a poor plating base.
We decided to re-plating KIJIMA products.
We purchased only the Upper Cover, but I think you should check the shape of your meter before purchasing.
View detail
Fits: SUZUKI V-Strom 650, SUZUKI V-Strom 1000
Even if Size is past Limit….
The film is hard and fits in the MeterSize Limit. I managed to install the film, but after washing the car, the film started to float when I blew off the water droplets with a compressor.
I stuck it again, but I am not sure about its durability. Is the size still not right?
View detail
Good for those who think it's good.
I did this as the inside of the Meter was getting swollen, but if you like the OEM look (the old look), I would not do the Recommendation. It will look and feel new.
It is better to have the Double-sided Tape on the back from the beginning to avoid any hassle.
View detail
Fits: HONDA fusion, HONDA fusion, HONDA FUSION, HONDA FUSION, HONDA FUSION, HONDA FUSION
No more foggy display
Ive been wanting to replace my display for years now, i was skeptical about finding a replacement. I couldn't believe i found one on webike. The price was cheap i think i paid more for shipping. I bit the bullet and ordered one and wow in glad i did. Looks and operates just like the original.. it was my first order from webike. I will definitely order for them again View detail