Reviews
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
This is the overall satisfaction level for ass pain measures
Since I bought a z900rs, I have been worried about the ass pain that everyone else is suffering from,
I have been studying all over the Net and watching YouTube.
There were many candidates, but we chose DOREMI for quality, cost performance, and delivery time.
The product was out of stock due to its popularity, but thanks to the power of Large Hand Wafer Big, we were notified that the product would be in stock soon and it was delivered.
The Tandem seatBelt requires a hole to be made by myself, and although I was nervous, I was able to make the hole without difficulty,
Belt could also be attached, although it is a little stiff.
I usually get an ass ache as soon as I go touring,
I felt that it was considerably eased.
Footing is a little worse, but not a problem at all in exchange for butt pain.
I would highly recommend it to anyone who is unsure about Seat from another company.
The quality is as good as OEM is also recommendation.
View detail
Pre-cut and inexpensive
I usually buy rubber mats and cut them, but this product is pre-cut and at this price, so there is no extra hassle.
Grip is also good.
View detail
Tuck roll
I drove about 300km and I wished I had bought it earlier because it didn't hurt my butt so much and looked better than the OEMOPHigh seat.
Seat back is also almost like OEMSeat, inside front side. (where Gel Zab and Sponge are located) The "Seat" is also waterproof, which I thought was well thought out. A tool was also attached to the back.
When installing it, it feels a little too snug and a little tight.
(Archi, it's in long tail).
I had a hard time putting on the Tandem belt by myself… I have a grip strength of about 52kg, but it was tough to fix the bolt while pulling it.
View detail
SEROW225 WE would like to see it listed in the Custom parts section.
[How is it used?
I had been using a 1997 SEROW225 WE by replacing the deteriorated seat cover with a certain manufacturer's fabric, but while playing in the mountains, I fell on a rocky terrain and damaged it...
Later, sadly, Webike's SEROW225. I was looking at the custom parts section of the "For re-covering Seat fabrics" and found NTB's famous Seat fabrics!
I was wondering why I haven't seen it listed in Webike's SEROW225 WECustom parts section, even though I've seen it on other sites. SEROW225. You were listed only in the column etc.
The product image shows that from 4J5~. (so called 225WE) Design shape of the SEROW225, so it is more than listed in the SEROW225 section. SEROW225 WE We would like to see it listed for use.
rather MotorcyclePartsCenter. I would so much like to reverse the listing of the Seat for SEROW in the "Seat for SEROW" as it is a pre-225WE Type.
How did you like it?
As mentioned above, the MotorcyclePartsCenter Seat fabric used before this product was sewn for Seats before 225WE, so there was some force required to attach it to the Seat for WE, but this product was sewn Exactly for WESeat, so the attachment process went smoothly. However, this product was Exactly sewn on WESeat, so the work proceeded Smoothly.
The fabric is thick enough, and the SIDE part "YAMAHA" If the Logo is included, you will not notice that it has been reupholstered, except for the Owner, because the finish is so natural. (I think SEROWMania will understand because the sewing parts and texturing of the fabric are different...) 。
I personally think this is the best alternative Seat fabric for SEROW225 WE because of its low price.
How did it compare to other products?
The SEROW225Series Dedicated I don't have many options for Seat fabrics. (excluding OrderSeat) I think this product is the best fabric as a ready-made product.
As of 2024, Seat Covers are still available on YamahaOEM... on YamahaHP. Part No. 4JG-2477A-00Seat Cover Assembly (skin only), price 17,380 yen I will
NTB's Seat Cover costs 2,850 yen, and although there is no YAMAHA Logo on the Seat side, the product is more than adequate considering the price difference.
[Points to note]
Since the Draping is designed to fit the shape of the SEROW225 WE OEMSeat, the reupholstering process itself is relatively easy and Beauty.
In addition, there is an NTB Channel on YouTube, where you can learn how to set up a seat, hang, etc. in an easy-to-understand manner. (What is put up in the video is not for SEROW) If you are not confident, you should take a look at one.
Other items that would be helpful
The deciding factor in the purchase
Made by NTB for safety and stability, this was seriously the deciding factor in my purchase.
It's not fancy or fancy, but it has OEM-like quality, and at a reasonable price, it's easy to buy.
[How is it used?
I enjoy all kinds of Situations, from everyday city driving to mountain play.
【Included Parts:presence or absence】.
Seat CoverQuantity:Did it come with 1pc. and Tandem belt?
The 1997 SEROW225 WE does not have the with Tandem Belt from the beginning, so there is no problem without it.
[ITEMS TO BUY TOGETHER
Seat fabric to fasten to Seat Base seat. Tucker. and short-legged core.
Vinyl bag with large diameter to prevent flooding of the seat sponge (Large sturdy with Vinyl bags for Garbage collection) is different for each person, so those who use it should purchase it.
In my case, I do not apply Vinyl, but I apply SiliconCoking agent to the seams on the reverse side of the Seat fabric to prevent water from seeping through the seams.
Opinions and requests to Manufacturer.
As I drive an older vehicle, NTB's Seat fabric is an indispensable product for me, so please keep the lineup going as long as possible!
View detail
Protection of OEMSeat + increased seating comfort
[How is it used?
Seat cover for SUZUKI/CHOINORI OEMSeat.
I was considering whether to buy a new seat or reupholster the tattered CHOINORI seat I had purchased when I found this on webike.
I bought it immediately because the Gold amount was low and I only had to cover the top.
Was the one you received as per Image?
The texture was better than I expected and the size was perfect for an OEM Product.
I chose black to match the OEM, but brown is also available, so you can easily change the seat color.
How was your experience with it?
Besides the seat protection and dress-up effect, I feel that the seating comfort has improved a little.
Originally, CHOINORI's Seat is soft, but by covering it with this, it feels as if another cushion is being laid on top.
[Points to note]
Nothing in particular, but it is only a Cover, so maybe one day it will tear and need to be replaced? It is just a Cover, so maybe it will tear and need to be replaced someday?
How did it compare to other products?
I can't think of any other product because of this kind of product in OEM Product.
View detail
fall
If I put it on Normal seat, I think it will be a little forward and downward.
My Seat has no problem because I have removed the anchor, so the Seat is like a crescent moon, and the footing is even better.
View detail
The ultimate cafe seat.
The Myoga seat is lower and better looking than another aftermarket low seat I had purchased before. My heels are 2mm from the ground where before it only my toes touched the ground. This seat is also more comfortable on long rides. It was also less expensive than the other seat. Thank you, Webike. View detail
From the eyes ??
I don't care about the texture or design, I bought it because it fits all my books, etc. neatly. I am fully satisfied. View detail
Fits: KAWASAKI ESTRELLARSCustom, KAWASAKI ESTRELLARS
Stretched well.
I bought Tucker to reupholster my old motorbike, and I didn't have the budget to spend tens of thousands of dollars on OEM or custom-made stuff, so I decided to do it myself at a low price. The thickness and texture of the seat is not as good as OEM, but I regretted that it looked cheap when I received it, but after I stretched it, it looks beautiful. The ride quality is also better. Even if I applied anti-slip coating, after applying the brake, it was gapping in front of the car but now it is stable and easy to drive without sliding. The material that looked cheap is now shiny and beautiful. I've never done any DIY before, so I'm a beginner and I'm too lazy to watch YouTube, but I can get by even if I do it haphazardly. Now I'm planning to reupholster it again and put Nylon in it for rain protection and Gel Zab under the Seat for long distance protection. View detail
StyleUp is a sure thing, but the rider's body shape will affect the Riding.
The GCraft seat is a good choice for me because of the balance between the tank and the seat. The ground contact area of the seat is limited, so in a positive sense, the position is fixed and the stability is increased. If you are heavy or taller than 170cm, you may feel cramped. View detail
Firm Grip force
Product Name
PROGRIP Pro grip Seat cover
Item Number
PG5011S-G
Vehicles
Honda CRF125F 2024 MODEL
Number of man-hours
1 hour
Required Tools
Torque wrench, Hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, ClipGun, etc.
Why did you choose this product?
apprehensive
Product Name
PROGRIP Pro grip Seat cover
Item Number
PG5011S-G
Vehicles
Honda CRF125F 2024 MODEL
Number of man-hours
1 hour
Required Tools
Torque wrench, Hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, ClipGun, etc.
Why did you choose this product?
I often sit on a seat, so I was looking for a seat with good grip and found this one.
Was the one you received as per Image?
It was just like the Image. It has more gripping power than I expected.
Was the installation difficult?
It is difficult. It takes hang to put it up tight without too much.
How was your experience with it?
I am Large satisfied with the firm Grip force.
[Included Parts:were they on?
None in particular.
[Was there anything that disappointed you?
None in particular.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Changed from Normal seat
The Eliminator is popular for its good footing, but … it was a little low for me and my feet were cramped, so I introduced this Seat.
I was honestly surprised to see such a change just by going up 3 cm from NORMAL.
I have been using it for a few years now, and I am very happy with it.
View detail
Tanaka Shokai (TANAKA) Tanaka Show Kai Seat StopperRubber Se
It is a good product that fits perfectly. View detail
Fits: YAMAHA VINO, YAMAHA VINO
It's Recommendation because of the quality!
My brother-in-law's Scooter (VINO) Seat was torn, so I reupholstered it for him. The fabric stretches well so it is easy to pull and put up! It is also durable, so it doesn't hurt at all even if I get in and out of the car every day! It's a recommendation because it makes the dirty Seat look like new! View detail
Fits: HONDA CBR1000RR-R, HONDA CBR1000RR-R FIREBLADE SP, HONDA CBR1000RR-R FIREBLADE
It was nice that it arrived a month earlier than promised.
There was the inconvenience of having to use the rubber washers on the original seat, but it fit very well and had a dress-up effect and did not lean forward.
Because it is a functional tuning product, you can purchase it without hesitation.
The inside of the seat is lined with vinyl and stitched tightly, making it a very reliable product.
I don't know about people who haven't used it, but I think those who have used it will continue to use it in the future.
Trust and try it~ ---------------------------------------------- ------------ There was the inconvenience of having to use the rubber washers on the original seat, but it fit very well and had a dress-up effect and did not lean forward. Because it is a functional tuning product, you can purchase it without hesitation. The inside of the seat is lined with vinyl and stitched tightly, making it a very reliable product. I don't know about people who haven't used it, but I think those who have used it will continue to use it in the future. Trust and try it~ Powered by Google Translator
View detail
Fits: YAMAHA Dragster 1100 Classic, YAMAHA Dragster 1100, YAMAHA Dragster 1100 Classic, YAMAHA Dragster 1100
Xvs1100 seat ,excwllent
Quick ish delivery, very good seat made well and fits perfect makes my bike look even better . Came well package and sealed with instruction, I will be ordering foe more in the future View detail
Fits: KAWASAKI Eliminator SE, KAWASAKI Eliminator
It's as solid as the driver's seat.
When I Tandem with my son, he told me that his buttocks hurt, so I decided to buy it.
Like the driver's seat, it is firm and Cushiony, so it is effective Large.
There was a word of mouth that it was difficult to remove the RearSeat, but please refer to a YouTube video that shows how to remove it.
View detail
Fits: KAWASAKI Eliminator, KAWASAKI Eliminator SE
It's solid
The fabric is more solid and cushiony than I expected.
It seems to work well for medium to long distance Touring.
View detail
To repair the Motorcycle seat anchorage & seating!
Since I have repainted several Motorcycle Seat fabrics, I thought I would try to do the same for the inside of the Seat! I decided to take on this challenge. The result was Large satisfaction! This sponge is really easy to work with (easy to cut with scissors), so you can easily use it for anchoring and repairing scraped (rotten) Seat sponge! I had some left over and used it to repair the sponge on a worn out seat chair that I love, and it worked fine too! The price is cheap and I will replace this sponge every year from now on! View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3
Higher than OEM.
[How is it used?
Circuit&Pass
Was the one you received as per Image?
Yes
Was the installation difficult?
It is essential to correct the holes.
How was your experience with it?
The behavior is conveyed better than OEM.
View detail