Reviews
Fits: HONDA CRM50, HONDA CRM80, HONDA TL125, HONDA TLR200, HONDA TLR250, HONDA XLR125, HONDA XLR200, HONDA XLR250, HONDA XLR80, HONDA CRM250, KAWASAKI KSR110, KAWASAKI KSR50, KAWASAKI KSR80, HONDA XR230, HONDA XR250, HONDA XR250 Motard, HONDA XR400 Motard, HONDA NSR50, HONDA NSR80, HONDA XR100 Motard
I think it's good
The installation itself is easy:remove the OEM and install this Light as is. There was no special modification. The glass surface of the Headlight looks like this, [Color] Now that it is Clear, I think it looks pretty cool. The brightness is not as bright as the OEM light lens, but the light distribution is more variable, and with the LED bulbs, it seems to be bright at a single point. View detail
Fits: HONDA CRM50, HONDA CRM80, HONDA TL125, HONDA TLR200, HONDA TLR250, HONDA XLR125, HONDA XLR200, HONDA XLR250, HONDA XLR80, HONDA CRM250, KAWASAKI KSR110, KAWASAKI KSR50, KAWASAKI KSR80, HONDA XR230, HONDA XR250, HONDA XR250 Motard, HONDA XR400 Motard, HONDA NSR50, HONDA NSR80, HONDA XR100 Motard
When I changed to LED Bulb.
LED Bulb light now illuminates the front of the car. View detail
Fits: HONDA CRM50, HONDA CRM80, HONDA TL125, HONDA TLR200, HONDA TLR250, HONDA XLR125, HONDA XLR200, HONDA XLR250, HONDA XLR80, HONDA CRM250, KAWASAKI KSR110, KAWASAKI KSR50, KAWASAKI KSR80, HONDA XR230, HONDA XR250, HONDA XR250 Motard, HONDA XR400 Motard, HONDA NSR50, HONDA NSR80, HONDA XR100 Motard
Used in xr100 MOTARD
I bought this product because the OEM Product was too dark when I switched to LEDs for the Valve, and the forward illumination is much brighter than the Normal. View detail
MC286V MONKEY/GORILLA Main Harness
OEM Product was discontinued, MC21 and others were sold, but MC28 was sold for MC28, so it was purchased immediately.
It is a bit expensive, but OEM Product is discontinued, used ones are also quite expensive, and there is no worry about contact failure; new ones are safer.
Some OEM Product and Connector types seem to be different, but it does not matter as long as they can be connected.
For some reason, the price sold by the producer was higher than the price of the product, and the purchase here was cheaper, free shipping, and the Point was also reduced.
View detail
Fits: その他 , HONDA NSR250R, HONDA NSR250R
For Waterproof Protection
Honda Series WaterproofBullet TerminalCover10 PairsQuantity:It was a set, so I bought it to protect the BlinkerWiring section, etc., and to use it for waterproofing.
The price is not that bad, there are a few of them, and the Rubber shape is not bad.
View detail
NSR250R (MC21) Position lamps in the
[How is it used?
NSR250R purchased used. (MC21) I purchased this product because there was no position lamp in the headlight of
When purchasing a T10Socket, I compared this product or M&H Mats Stripe, No Brand product made in China.
Bullet Type Terminal eliminates the need for wiring (Required for 6V MONKEY/GORILLA Main Harness side) So, I chose it because it comes in two packs and the rest seemed reliable since it is a Brand that produces a variety of NSRParts.
Was the one you received as per Image?
It was grayer than it looks in the picture. (Naturally, there is no problem in actual use.)
Bullet Type Terminal was also installed without problems.
Was the installation difficult?
Anyone can replace the Valve without tools by simply plugging in the 12V and T10 size Valve and attaching it to the Headlight.
There is no problem with the fit with Valve and Headlight, and it seems to have a moderate resistance and does not seem to shift.
Wiring on the 6V MONKEY/GORILLA Main Harness side has been changed since I purchased the vehicle in my case, so I am not sure about the OEMHarness modification.
How was your experience with it?
Naturally, the light came on without any problems.
Valve is M&H Pine Stripe's WedgeSingle Bulb [Color] Clear (https://www.webike.net/sd/1557693/) I used the
I have just started using it, so I don't know about its longevity and deterioration, but so far I am satisfied with it.
[Included Parts:were they on?
This is the only product as shown in the photo.
[Was there anything that disappointed you?
Not particularly
【Review】
China No-Brand products are of questionable reliability, while those of a good manufacturer are expensive, but this product is positioned right between the two.
In the end, China products are just less expensive, like 4-packs and 5-packs. I don't need that much. I don't need that much." but this product is just right in a 2-pack.
For old cars, it can be used as a position lamp, meter lamp, etc., or for repair in case of emergency.
View detail
Used on NSR250R MC18.
It is used for MC18.
I have been wanting to replace it with a countermeasure regulator ever since I bought it, but the voltmeter showed the specified value, so I put it off. The other day, while driving, the voltmeter showed 15.5V for a moment when the headlight was on.
The Conversion Harness has no wiring wrapped around the Conversion Harness, so I added a Spiral Tube to the Conversion Harness afterwards. Spiral Tube was added after the Conversion Harness.
The installation went easily and without any inconvenience.
As shown on the product page, we used a screw lock and installed it while checking the tightening torque.
View detail
New! 6V MONKEY/GORILLA Main Harness
[How is it used?
The 6V MONKEY/GORILLA Main HarnessSpec. of the time has been enhanced and versioned up in many places.
As an NSROwner, I think it is a safe and Large satisfactory product.
How was your experience with it?
I feel like Motorcycle has been revitalized.
Was the installation difficult?
Since I was unfamiliar with the installation, I asked DMR-JAPAN to do it.
You were prompt, kind and courteous!
View detail
Fits: HONDA NSR250R, HONDA NSR250R, HONDA NSR250R
Adjustment
I bought it because I thought it would be useful for RCValve's adjustment.
Although it is used infrequently, it is not that expensive, so it is a useful product to have.
View detail
Fits: HONDA CRM50, HONDA CRM80, HONDA TL125, HONDA TLR200, HONDA TLR250, HONDA XLR125, HONDA XLR200, HONDA XLR250, HONDA XLR80, HONDA CRM250, KAWASAKI KSR110, KAWASAKI KSR50, KAWASAKI KSR80, HONDA XR230, HONDA XR250, HONDA XR250 Motard, HONDA XR400 Motard, HONDA NSR50, HONDA NSR80, HONDA XR100 Motard
It's so good.
The darkness of the unspoken early XRHeadlight. 95 model.
The brightness has been dramatically increased by replacing it with this unit.
New, made in Japan, Multi-reflector, and even a light bulb at this price.
It is the best cosmetic product. Installation can be done by simply replacing the Light Adjustment Angle Screw with the original one.
Seriously, it's the best.
My problems were solved without buying expensive related Parts.
View detail
Fits: HONDA NSR250R, HONDA NSR250R, HONDA NSR250R
Convenient
This is a useful product for a residential environment where you don't want to make too much Engine noise. View detail
Fits: HONDA NSR250R, HONDA NSR250R, HONDA NSR250R
I don't know why, but it's too far around the HI side than HI.
I checked the operation with MC28.
It will turn too far to the HI side than the HI position.
In the case of the MC28, I removed the Axel opening SensorCoupler and inserted the Card, which moves it to the HI side, so that's how I adjusted it.
If you see Manufacturer, please give us a possible reason.
View detail
Fits: HONDA CRM50, HONDA CRM80, HONDA TL125, HONDA TLR200, HONDA TLR250, HONDA XLR125, HONDA XLR200, HONDA XLR250, HONDA XLR80, HONDA CRM250, KAWASAKI KSR110, KAWASAKI KSR50, KAWASAKI KSR80, HONDA XR230, HONDA XR250, HONDA XR250 Motard, HONDA XR400 Motard, HONDA NSR50, HONDA NSR80, HONDA XR100 Motard
LED
This is a re-evaluation as I have converted to LED.
The Valve I used is PIAA Headlight Bulb LED 6000K DualBeam 12V 5/6W H6M for Motorcycle. (PH7 equivalent) It is
The XLR80R is an all-AC car, so the Valve I chose is an alternator and supplies.
Simply replace with a Halogen bulb and the job is done.
Since the Multi-reflector Unit has more depth than the OEM Headlight Unit, we were able to install the PIAAValve, which is almost twice as long as the Halogen bulb, without any interference.
Also, because it is a multi-reflector, it does not cause the high-low inversion phenomenon that often occurs when using OEM headlight units with LEDs.
The Clear Lens Multi-reflector is LED, so it is very bright. The spread of light and the height of the light are not a problem, and the safety is increased by introducing LED Bulb.
View detail
Fits: HONDA CRM50, HONDA CRM80, HONDA TL125, HONDA TLR200, HONDA TLR250, HONDA XLR125, HONDA XLR200, HONDA XLR250, HONDA XLR80, HONDA CRM250, KAWASAKI KSR110, KAWASAKI KSR50, KAWASAKI KSR80, HONDA XR230, HONDA XR250, HONDA XR250 Motard, HONDA XR400 Motard, HONDA NSR50, HONDA NSR80, HONDA XR100 Motard
become brighter
The OEM Cut lens has thick and dark glass. This product has Multi-reflector and thin plastic lens, so it is much brighter than the Halogen bulb.
If you use LED or HID with Cut lens, the optical axis and high low will be Brown and bitter Brown, so it is necessary to use Multi-reflector.
The point to be concerned about in the installation to XLR80 was glad if it was attached with Seal or Rubber plug of the hole blocking at least because Position is unnecessary. it has a feeling depth than the OEMHeadlight unit, and it is difficult to organize Harness. Sponge tape is necessary to fill the gap with Cowl. The optical axis adjustment screw, spring, and screw receiver plastic need to be used with the OEM product. These are the things that I think.
Although there is a point to be concerned about, it becomes bright visibly only by exchange of the Headlight unit. There are various opinions that the making is cheap, the paint peels off, and the Position unit is loose, and I agree with that point, but when I think that it becomes bright easily, and it becomes a stepping stone to LED conversion, I thought that it was a product of high satisfaction.
View detail
Fits: HONDA CRM50, HONDA CRM80, HONDA TL125, HONDA TLR200, HONDA TLR250, HONDA XLR125, HONDA XLR200, HONDA XLR250, HONDA XLR80, HONDA CRM250, KAWASAKI KSR110, KAWASAKI KSR50, KAWASAKI KSR80, HONDA XR230, HONDA XR250, HONDA XR250 Motard, HONDA XR400 Motard, HONDA NSR50, HONDA NSR80, HONDA XR100 Motard
Changed to LED Headlight
I bought this to use as a LED Headlight.
The position lamp can be attached, but I don't use it, so I have blinded it.
View detail
Fits: HONDA CRM50, HONDA CRM80, HONDA TL125, HONDA TLR200, HONDA TLR250, HONDA XLR125, HONDA XLR200, HONDA XLR250, HONDA XLR80, HONDA CRM250, KAWASAKI KSR110, KAWASAKI KSR50, KAWASAKI KSR80, HONDA XR230, HONDA XR250, HONDA XR250 Motard, HONDA XR400 Motard, HONDA NSR50, HONDA NSR80, HONDA XR100 Motard
Very nice
When I ordered related products for xr motard, I found that only one product can be ordered. For its appearance, the transparent part is very crystal clear, but I am also annoyed by it. I hope it will be better if there are more color choices. . View detail
Fits: HONDA NSR250R, HONDA NSR250R, HONDA NSR250R
Press key ON to move to Hi.
With the key off, remove the RCValveMotor's coupler and set it to HI while Connect Mr. Smoosh. If you turn on the key, Pulley of Valve will move to HI side. But if Kill switch is OFF, it won't move to HI even if you turn ON the key. So be careful. View detail
Fits: HONDA NSR250R, HONDA NSR250R, HONDA NSR250R
I've moved on to HI
Purchased for WidePulleyfor Replacement
When I tried to make a full open adjustment, I turned on the Engine and confirmed that it was high, then turned off the Engine hand (of a clock)
Remove the Chamber and adjust the wire and turn on the Chamber and check the engine This is a process called
By using this product, you can work without hanging the Engine and without removing the Chamber Finish
I think it's going to be pretty quick
View detail
Fits: HONDA CRM50, HONDA CRM80, HONDA TL125, HONDA TLR200, HONDA TLR250, HONDA XLR125, HONDA XLR200, HONDA XLR250, HONDA XLR80, HONDA CRM250, KAWASAKI KSR110, KAWASAKI KSR50, KAWASAKI KSR80, HONDA XR230, HONDA XR250, HONDA XR250 Motard, HONDA XR400 Motard, HONDA NSR50, HONDA NSR80, HONDA XR100 Motard
Definitely brighter
I used to be stunned by the darkness of the flashlight of a long time ago, but this product is definitely brighter The latest LED Headlight Standard However, the latest LED HeadlightStandard EquipmentMotorcycle is not far behind
XR100MOTARD does not have the same connector as the XR100MOTARD, so soldering and processing of the terminals are required It is
Moreover, a Position lamp is attached, but there is no use for it I blocked it with tape
I would have liked to see the Multi-reflector used as an OEM since I drive a moped at night
View detail
Fits: HONDA CRM50, HONDA CRM80, HONDA TL125, HONDA TLR200, HONDA TLR250, HONDA XLR125, HONDA XLR200, HONDA XLR250, HONDA XLR80, HONDA CRM250, KAWASAKI KSR110, KAWASAKI KSR50, KAWASAKI KSR80, HONDA XR230, HONDA XR250, HONDA XR250 Motard, HONDA XR400 Motard, HONDA NSR50, HONDA NSR80, HONDA XR100 Motard
The look and brightness of the Headlight has been improved in the Large width
Results of installation
The historical Lens cutType was replaced by the Multi-reflector Motorcycle itself feels rejuvenated
The brightness that was thought to be reduced by Lens cut became the original brightness of Valve
(Valve uses DAYTONA's high efficiency Valve 25W, not the included Blue)
There are some points to be improved as follows, but it is an alternative to OEM parts that can be installed with almost no modification If you think about it, it's what you'd expect
The difference between the product photos on the web and those on the web
In the photo, the HeadlightBody and Bracket have a glossy platting look The paint is a solvent that is used to degrease the paint (for reasons to be explained later) Thin? It's thin?
3. Installation
Because the KAWASAKIBracket interferes a little with the Cowl, a little in Pliers Connected to each other and removed with Gold genus fatigue to deal with it
Because the bracket for adjusting the optical axis interferes with the cowl, it is necessary to bend it slightly
Screw and spring for optical axis adjustment are included in the product Includes Parts:(Screw is thicker than the hole in the cowl but no problem (Screw is thicker than Cowl's hole, but no problem)
Wiring of the headlamp does not match (Male and Female of Bullet Terminal) Female is partly reversed), so if you process it is OK, but use the vehicle OriginalWiring
Position lamp
As mentioned in the other imprints, Material:Rubber's SocketPlug is scuffed and comes off with little force
The rubber plug is a soft material, so if you put on and off the plug several times, it may get cracked And then, the scum comes out
It would have been better if it was a solid and rigid rubber, but it was not reliable The SocketPlug was removed and the hole was covered with Aluminum Tape (Confirmed that the paint can be thinned with solvent by degreasing at this time (Confirmed that the paint is thinned with solvent by degreasing at this time)
Because the headlight is always lighting, if it is a position lamp of this degree, it is unnecessary It is good without original
5.Rubber cover of Headlight Bulb
The material of the rubber may deteriorate quickly, so we have to make sure that we can use it in the vehicle Installations
Installation is not a problem as long as you pull it on firmly
6.Others
The LampLens was scratched, even though it was supposed to be new
I was dissatisfied with the initial quality control (pride and love for the company's products), although I put up with the scratches as they would eventually appear
Because of the scratches, the Material (or surface treatment) of the lens itself is soft Maybe it is
View detail