Reviews
Looks great!!!
[How is it used?
Mounted on 250TR
Was the one you received as per Image?
It looks better than Image, and it's raised my Tension quite a bit!
Was the installation difficult?
The installation was easy, just divert the OEM Bracket.
I had to open up the Bracket to get it to align properly with the screw holes.
How was your experience with it?
I went with Option's low rebound Seat, but the Seat itself is a bit stiff.
Because the OEMSeat is quite thick, it seems to have inferior Cushioning.
However, I had some numbness in my buttocks with the OEM, but it was resolved with this Seat.
I think it's a good firmness.
[Was there anything that disappointed you?
I was disappointed that it was not waterproofed.
When Seat gets wet, your butt will be wet for about 3 days, no matter how sunny it is.
It may be Waterproof treated, but not Tuck roll, so it gets wet.
I'm not sure what to do about that one.
View detail
cool design and high quality handcraft
what a steal! a great suprise for low budger customer. it's durable and it gives rider a very good experience of riding even it's flat. View detail
Pillion Seat
It was Exactly to Flat fenderSeat made by GarageT&F. View detail
Replace heavens flat seat
My bike is 2014 sr400. Heavens flat seat Hook position is too low.try to first time seat was touch to battery and between seat and bike frame gap too big. Rubber mount don't reach to frame So i made custom seat kit then completed install. View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400
Good Seat, but processing is necessary
When installing on the Normal tank's car body Tank's Bracket and Seat's Bracket hit Seat's front Bracket..
Because there was a description that NORMAL's Damper is required, there was an explanation and it was not attached to the sample image, so I was preparing to purchase, but the front RubberDamper was attached. It is necessary only in the backward direction.
Although I had a hard time cutting the Bracket, Quantity : It is a feeling of Fit not to lose to Normal seat once set.
Because I am raised in Damper, I think Space can be done under Seat, so I think that I can not rub it with the electrical equipment when I do Ska tune.
There is no worry that rubbing can be done because Seat land does not come in contact with Tank or Frame.
View detail
Very good
Because it is low back pain, I also attached Spring.
Slightly unevenness does not come vibration at all !!
The installation was also easy..
Seat itself was soft and thicker than I thought.
View detail
Fits Well and Looks Good
The seat seems to be of good quality. It is thinner than the factory seat but seems to be just as comfortable. I am happy with this product. View detail
It is likely to be a necessity in the summer.
Sea's steaming by all means.
There are such things if you are looking for various things.
It is comfortable. With the presence or absence of clouds.
It seems to be possible to prevent the heat of Seat when it stopped for a long time under the scorching sun. It is likely to be a necessity in the summer.
It is also good to remove easily.
As it is supposed to be exclusive to Heaven's Solo seat, if it is a solo seat of another company, it can not be installed according to the shape or there are cases where Fitting is bad.
View detail
Shape satisfied. Sitting comfort is not so good
The shape and texture were not particularly satisfactory and satisfactory products, but StandardForm (Low Repulsion Type) In spite of being written, it was a thin shape with Ka Chi Chi that I could not feel any rebound at all. I do not ask for a comfortable feeling as OEM, but I wanted a soft texture as it may be thicker a little more. View detail
This fits my 2015 SR400 with the use of the Daytona Seat Mounting Kit 75652. I have two small complaints (I acknowledge these are advertised for the non-fi models). 1. The tabs are too long, you will need to shave them down to clear the fuel tank. 2. It i
This fits my 2015 SR400 with the use of the Daytona Seat Mounting Kit 75652. I have two small complaints (I acknowledge these are advertised for the non-fi models). 1. The tabs are too long, you will need to shave them down to clear the fuel tank. 2. It is too short, it leaves about 1" gap between the edge of the seat and the fuel tank. It lowers your seating position, which is good/bad depending on your point of view. It's not as comfortable as the stock seat, but it's not uncomfortable either. There's enough room to go two-up on this seat in a pinch. You will need to buy you own mounting screws too. View detail
Fits: YAMAHA TW225, YAMAHA TW200, YAMAHA TW225, YAMAHA TW200
A degree of comfort, appearance, and a price are satisfied.Although it is , water from the stitch of the sheet after a car wash after it rains ... It Oozes and the hips are a deluge! Only in it, the rest is the highest also at !
A degree of comfort, appearance, and a price are satisfied.Although it is
, water from the stitch of the sheet after a car wash after it rains ... It Oozes and the hips are a deluge! Only in it, the rest is the highest also at
!
View detail
[a Webike Monitor] -- -- it is glad that he can buy a Solo seat with this price. A Cost performance is evaluation, although the benefit is (? ) since it is thinning although it is a thing with low rebounding.
[a Webike Monitor] --
-- it is glad that he can buy a Solo seat with this price.
A Cost performance is evaluation, although the benefit is (?
) since it is thinning although it is a thing with
low rebounding.
View detail