Reviews
nsr250r dogfight racing
The product was delivered well. This is my first time posting a review.
I am happy that I was able to purchase a dogfighter racing chamber for NSR250 and install a new one!
It has a beautiful appearance made of excellent stainless steel 304 material.
I'm looking forward to it and hoping that the performance will come out as well. I'm excited.
I am uploading detailed photos, so please refer to them before purchasing.
-------------------------------------------------- -------- I received the product delivery well. I will post a review for the first time I am happy to buy a new Dog Fighter Racing Chamber for the NSR250! It's a beautiful look of a great stainless steel 304 I look forward to the performance of the performance. Please post a detailed picture. Powered by Google Translator
View detail
Rubber Joint
I am repurchasing to fix Chamber.
It seems to be quite hard and seems to absorb vibration.
It is not bad looking.
View detail
It works fine on UniversalRiveter!
[How is it used?
I purchased this Rivet to reinforce the Belt of the Motorcycle Cover because it had come undone and fallen off.
How was your experience with it?
It worked fine on UniversalRiveter.
How did it compare to other products?
To be honest, I can't tell the difference from other companies' products.
[Points to note]
The Sizes are finely divided, so you should buy the right one for your application.
▼Quantity:Set products are fine, but I don't use them very often, so I buy them each time I need them.
View detail
Fixed Chamber
Used for vibration control and fixation of Chamber fixing section.
It is a fairly stiff rubber that does not seem to shake that much and can be fixed in place in a good way.
It doesn't look bad.
View detail
Fixed Chamber
I bought this for the Joint of Chamber and Bracket for fixing.
The construction looks good. The fixation also seems to be fine.
I wish it was cheaper.
View detail
nsr250 chamber
It's still pre-assembly
Delivery took less than 4 days.
There was a week at customs in Korea.
Were you lucky? I had one in stock and the yen is down. -------------------------------------------------- -------- It's still before assembly Delivery took less than 4 days. There was a week of customs in Korea. Was you lucky? There was one inventory and the yen. Powered by Google Translator
View detail
Replace with new one
The bolt was also replaced along with the installation of cushion rubber at the chamber fixation point.
If the shape and Size fit, it could be fixed with a substitute.
View detail
exchange
The bolt was also replaced with a new one along with the installation of the rubber in the chamber section.
Size, if the length fits, it looks like a good substitute.
View detail
Chamber for more TZr fun!
TZr250RS (1993 MODEL) was restored with hanghang and replaced from OEMChamber for the final touch.
We chose Stainless SteelChamber because it is resistant to rust and we wanted to experience its light sound.
Exhaust Gasket is not required for 3XV like OEM.
Heat resistant silicon gasket is required separately and must be prepared.
I did the work myself, but it takes about 1-2 hours from the removal of the OEM chamber to the completion of the replacement, and you have to wait for the silicon gasket to cure separately, so you should expect it to take 2 days.
Also, a Spring hook is necessary because Spring needs to be put up.
What surprises me during installation is the weight, as it is less than half that of the OEM, Karu-karu!" This is the case
An Instruction Manual is also included, which is old-fashioned but well organized, with detailed instructions on installation and precautions.
The position of the holes in the bracket and the dents in the side stands switch area were etc.Exactly.
I ran for a while after replacing the chamber, and I thought it would scuff at low rpm, but that is not the case at all.
I felt that it was not that different from the OEM.
It is also quieter than I expected when Idling and quieter than an OEMChamber of unknown age! (Lol)
The sense of power and torque when revving up to high RPMs changes dramatically, and it becomes a lot of fun, so be careful not to overdo it.
I also use Jackal Chamber, but I personally felt that Jackal Chamber is superior in the mid to low speed range.
I think it is a win-win situation, as this is more fun in the high-rpm range.
I heard that there were some minor spec. changes and some differences from the spec. of SS Fuchu Stripe at that time, but still, I was very grateful to be able to get a new Chamber made by DogFiret Racing even in this era, and thanks to them, I could enjoy the new Stainless I was able to enjoy the new Stainless Steel Chamber.
View detail
First Exhaust Chamber Exchange
So far SEA BASSRGV 250 Γ (VJ23A) HondaNSR250R
(MC28) I was on board.
Γ - When I was NSR I was enjoying with Full normal.
When returning last summer, the current car TZr 250 R
(3XV Full normal car) Enjoy Touring and buy Exhaust Chamber, the real thrill of 2-Stoke
I thought that I wanted to experience and exchange, purchase DogFire RACING's Exhaust Chamber (Purchase is a certain Motorcycle supplies store Sorry for Webike)
Compared with OEMExhaust Chamber before installation, it is light first
I thought that it would contribute to the weight saving of Motorcycle just by surprise exchange.
Although it is the impression that it ran after installing, if it is replaced with ReplaceExhaust Chamber, it seems that it will be hard to handle the low speed range
I thought, but there is not much difference compared with OEM, and at 5000 to 8000 revolutions Power - Both Torque up and go from 8000 rpm to full power at a stroke along with Racing sound, becoming full power, with Exhaust Chamber exchange For the first time experiencing sudden change, while power up
The power band becomes wider, which makes it easier to handle,
Did.
I can not say that Exhaust Chamber itself is inexpensive
Finish welding of Stainless Steel Exhaust Chamber - It is good to buy it if you see the texture.
Demand is considerably reduced compared to the old days Even now it is very appreciative that we are producing the Exhaust Chamber
Well, I thought that I wanted to work hard.
View detail