Reviews
Low.
[How is it used?
I am enjoying playing in the mountains with CRF125F. It is a great machine with no complaints at all, but there is one point that bothers me when I play with it. It is that the first gear is too low and the second gear is too far away from the first gear. I thought it would be better if I could use the 2nd gear a little more. So I bought this product.
Was the one you received as per Image?
I received a product that was probably some kind of OEM Parts Repack. I think I can find out if I look into it, but considering the time it takes to look into it, it would be quicker to buy this product from Rikizo. Gold is the solution.
How was your experience with it?
Dropping one Front works pretty well. It has changed more than I expected.
I can now drive at speeds where I feel like I'm stalling in 2nd gear without having to drop down to 1st.
[Included Parts:were they on?
Fixing plate and mounting Bolt are Standard Equipment. Gentle.
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Chain could be adjusted without replacement.
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I will load it in my Transporter as a kind of SettingTool.
View detail
I haven't fallen over yet.
I don't know, I haven't tipped it over yet, but I think it is sturdy and well made. View detail
Fits: HONDA GB350S, HONDA GB350, HONDA GB350S, HONDA GB350
Secondary reduction ratio to Long side
Tuning was easily accomplished by simply changing the Driven Sprocket from a NORMAL secondary reduction ratio of 2.5 to 2.3.
The NORMAL has a pleasantly thick Torque feel, but I am a little dissatisfied with the handling of the first and second gears after tuning,
The low level of the car is easy to maneuver, and smooth gear changes can be made from startup, increasing the sense of speed.
View detail
Fits: HONDA XR230 Motard, HONDA XR230, HONDA SL230, HONDA FTR223, HONDA CB223S, HONDA XR230 Motard, HONDA XR230, HONDA SL230, HONDA FTR223, HONDA CB223S
FOAM FILTER REPLACEMENT FOR XR230M AND CRF230M
Filter is excellent quality. Have to cut and remove old paper filter. Foam filter is shipped dry so needs to be oiled. Do not remove all of the paper filter. Leave some paper to seal the new foam filter. View detail
A good option
The front sprocket was changed from 14T to 15T keeping the rear sprocket the same. No modification needed at all. This is a slot-in replacement. The sprocket makes the power delivery in 1st and 2nd linear. There is pronounced knocking in 2nd gear at 30kmph. This wasn't there before but need to get used to it. Very good performance in 3rd and 4th gears. Easier to go above 100kmph in 4th and maintain speed. This modification doesn't impact the overall performance of the bike in city traffic. I live in Bengaluru and traffic here is at a different level. Recommended for people who tour often on the bike. View detail
Fits: HONDA CT125 (Hunter Cub), HONDA CT125 (Hunter Cub)
Perfect for off-road
I replaced it because I do a lot of off-road driving.
The 13T Driven Sprocket makes touring a little more difficult, but I am satisfied with it for off-road use.
Not recommended for On roadTouring Maine.
View detail
Fits: YAMAHA XG250 TRICKER, YAMAHA SEROW250
Made by XAM.
I bought this to convert the chain size of my SEROW250 from 428 to 520.
I wanted the secondary reduction ratio to be as close to the OEM 3.2 as possible, but I decided to go with the 12, which is almost the same size as the OEM, because the 11 would hit the chain slider harder and there would be fewer options for the rear sprocket.
For 12 guns, the OEM approximation is 3.17 for a 38 Rear Sprocket and 3.25 for a 39 Rear Sprocket reduction ratio.
I set the Rear Sprocket to 38, and the Chain Link number to 106, but the Chain Adjuster is at the back, near 13.
The length of the chain can be calculated by Pitch×LINK number, but it was easier to use DID's Chain link calculation table.
https://didmc.com/chain/chainlink/
I bought it in a longer LINK number just in case and Cut it.
I've only used it for about 10,000km now, so durability is still unknown, but it will probably outlive the Chain.
View detail
Fits: HONDA CRF250L, HONDA CRF250M, HONDA CRF250 RALLY, HONDA CRF250L, HONDA CRF250M, HONDA CRF250 RALLY
Normal good
Anyway, it's a normal good product.
If you have a Lever that doesn't have an adjustment mechanism, you can change it.
View detail
Products that do a good job.
I bought it to replace the sprocket and chain set. View detail
Fits: HONDA XR230 Motard, HONDA XR230, HONDA SL230, HONDA FTR223, HONDA CB223S, HONDA XR230 Motard, HONDA XR230, HONDA SL230, HONDA FTR223, HONDA CB223S
Filter
The filter looks very good. It is installed in the body of the old one, after gutting the old element, it fits perfectly in size, so you no longer have to buy the original in three ways. In short, I recommend, inexpensive and cheerful. The filter looks very high quality. It is installed in the case of the old one, after having gutted the old element, it fits perfectly in size, so you no longer have to buy the original in three ways. In short, I recommend, inexpensive and cheerful. translated by google translate View detail
Fits: YAMAHA SEROW225 WE, YAMAHA XT250X, YAMAHA SEROW250, YAMAHA XG250 TRICKER
It can be used with confidence
Review after 100 km running at the same time with Chain.
? Compared with OEMSprocket, the weight is obviously light.
? Because of the high level of the machining system, since the gear meshes with the Wheel hub part as it presses inwardly, the play is suppressed to the Smallest.
? There is a stamp of xam and feel relief.
? Since Red color Gold family Bush is almost hidden by Washer after installation, I think whether it is acceptable to some extent even those who are not good at flashy.
? Gold genus Bush is slightly transmitted to Chain's Torque fluctuation compared to OEM's Rubber Bush.
Although durability is unknown, it was a product I liked about considering continuing purchase in the future.
View detail
Saved with Set
I installed it in TLR 200. Remove Front sprocket, replace, Rear also remove Tire, replace (A little overhead) Did. From Front 13 to 10 of OEMSprocket, Rear changed from 44 to 41. To travel on an ordinary road, it was a little slow GEAR, it became difficult to handle, but it fits Exactly to the low speed for TRIAL. Despite the desire, if there are 11 Front sprocket's selections as well as 12 selection ranges, even better. ? 【What made you decide the purchase?】 Manufacturer is good. Forgery
? 【How was it actually used?】 It is perfect for Section.
? 【Was it difficult to install? (Hard parts case)】 It was easy..
? 【Please tell me the point of installation and hang (in the case of Hard parts)】 With time, anyone can easily install. Point is necessary for Cutter of Chain.
? [Is there anything I was disappointed about?] Absent.
? [Request to Manufacturer - Please let me know if there are any improvement points】 Expansion of the selection width of a number Large
? 【Have you compared items?】 ISA
View detail
Forgding Measuring Cup quotient Product No : PC-00003
This force Measuring Cup PC-00003 is Material : It is Plastic's 30 cc Cup.
Fluid (Brake fluid) Approximate amount when swapping (30cc) I used it to divide it into Small.
In the case of Fluid, when working with the main lid of the can open, moisture in the air invades and it seems that it will react, so using this powered Measuring Cup PC-00003 several times I use it separately by pouring Small..
It is use of this force manufacturing Measuring Cup PC-00003 to the last as dividing to Small and simple as a guide, but since you can work while grasping the amount of Fluid you are using, you can carry out the work efficiently.
Also, since this capability Measuring Cup PC - 00003 has a lid, I can store O - ring and RingWasherGasket etc in a way not to be dented or scratched inside, or keep the Bullet Terminal terminal and Mini Flat Type Also useful for putting small parts such as Fuse.
This force Measuring Cup PC - 00003 contains Material : Plastic lid is attached and the lid closes tightly but I do not keep liquids thought by any chance.
Material : Since it is Plastic, it is not strong enough, but this powered Measuring Cup PC - 00003 is sufficiently useful as a 30 cc Measuring Cup and it is very inexpensive so purchase multiple items and make Small items etc etc etc etc. It is a very convenient container to classify it.
As for this mechanized Measuring Cup PC - 00003, it is inexpensive because it was lightly sealed so as to put a small thing in it, so this Measuring Cup PC - 00003 has a sufficient function as a Measuring Cup for small quantities As we are doing it will be a product of Recommendation in any case.
Moreover, it is a cheap product so it is very easy to purchase.
I made this power Measuring Cup quotient Product No : PC-00003 <Container Quantity : 2pc. I purchased Set>, but Quantity : 2pc. Set was a bit less, so I'm thinking about buying more on my next shopping.
This powered Measuring Cup quotient Product No : PC-00003 does not transform deformed even when used for Gasoline and its additives and engine oil as well as Brake fluid, and for Lacquer thinner and Parts cleaneretc. It is Measuring Cup which lasts long lasting Large even if it rinses with.
.
View detail
quality - Both performance and wonderful
Throttle Cable is a part that always operates, so it is a very big thing part to get on comfortably.
Now that the OEM has been abolished and no parts have come out from Manufacturer, I think this product is very appreciated.
Making - Quality is good, installation and operability are good, there is no problem.
This time it is the second time to buy this product, and now TLM 50 playback is also the second one.
View detail