Reviews
fat eyes
I bought this LED because the same one was out of order.
Quantity:2pc. One of the Set is the out-of-quantity:1 Set of 2pcs. so I had no choice but to use Quantity:1 Set of 2pcs.
Lynn Parts LEDs last 2 yearsQuantity:2pc. One of the Sets is still Large sturdy, but we have now added a Quantity:2pc. Quantity of Set:Since I purchased the Set, I put on the newly purchased LED Light.
This product is sturdy and durable, both high and low Large without flicker.
View detail
Mini LED Front Blinker from Rin Parts
* About quality and texture, The blinker housing base is made from a white plastic and the blinker lens is made from a lightly tinted plastic. * About the feeling of use, Great look with the use of these mini LED blinkers, the front end of the Grom is much more sleek without the need of bulky front turn signals. * Products to buy together, Being a LED blinker the Honda OEM flasher relay will not be able to operate these at the correct flash rate so you also need to purchase a LED resistor kit to add in-line to correct the flash rate. * Difficulty of installation, Installation requires headlight removal and then the headlight side shrouds to be removed to access the electrical connector and mounting hardware. With the LED blinker not having a Honda OEM style electrcial connector you will need to change either side so this issue is resolved. The process was completed in 60 minutes with a little difficultly. * Cost performance and comparison with other products, Cheapest pricing you will find for mini LED front blinkers that looks great and do the job but if your budget is not limited and you want the best then checkout the product from TST. * About shipping and packaging, I am happy to wait 8 weeks on average for my parts to arrive in Sydney Australia via Webike's sea freight which comes with tracking and insurance so I know I'm covered in case something was to go wrong but with there outstanding bubble wrapping and boxing there have been no problems. * Any concerns, cautions, or advice when purchasing, If you are going to be using LED blinkers at the front and rear then a LED flasher relay will be a better option then having in-line resistors at both ends to correct the flash. Use the product reviews to assist in making a decision on your purchase. View detail
I think it's good because it's cheap
Since I own two ZOOMERs, I'm going to stock up on some of these. I don't know about durability yet. View detail
Must do improvement
fantastic quality easy to install are very visible even in bright sunlight despite the dark tint and just make the bike look so much cooler View detail
Stirlish
Large taste shape It is a very nice feeling Cool.
Drilling is necessary for installation but it is easy and very easy.
I am pretty pleased with the start.
View detail
Cheap but as expected performance
Although it is dark and dangerous when it is OEMHalogen at night, it is also possible to use high Light for masters - - - I found this item when I was thinking.
Although ZOOMER is two lights, this product is Quantity : 1 Set of 2pcs. Because of Large change profit.
The product is Blue in appearance, but the light is pretty white and it is bright.
I tried to light it on the wall without the street at midnight, but actually the image is actually brighter than the image.
Since it thinks that it can be attached to a vehicle using Valve of the same type other than ZOOMER, I would like to try it by all means.
View detail
Brightness is also reasonable
I installed it in the outside Lucas tail lamp. I was worried about the amount of light, but with normal Tail Bulb etc.. It is bright above that.
The difference between Position and Stop is clearly understood.
Durability will be used in the future, I think that this price is a good item.
View detail
easy installation just 4 screws good product. but have to release front fender. also have the connector in the package. very easy to use.
easy installation just 4 screws good product. but have to release front fender. also have the connector in the package. very easy to use. View detail
RinPartsMicro LED Blinker
I tried to buy this Rin Parts Rin Parts Micro LED Blinker Ver1 intrigued by the appearance cuteness, but the light emits a strong light rather than cute but dazzling.
Daylight - I think that it can be used for Position and Blinker, but it may be better to lower the amount of light a little.
Especially, always lighting Daylight - When using to Position, Body's Material : Since Aluminum Body is heated and it becomes hot, Recommendation for installation on a windy place where it is easy to dissipate heat.
Of course, I think that it is a good decision to lower the light intensity and limit heat generation.
The whole body of this Rin Parts Rin Parts Micro LED Blinker Ver1 is made of Material : Although it is made of Aluminum, since the LED element is designed to dissipate heat as it is weak to heat, it is a product that can be expected for durability if it does not get as hot as possible.
As a result of doing several lighting tests to wiring this Rin Parts Rin Parts Micro LED Blinker Ver 1, I saw the rectification diode on the Minus side as 1 pc. , Plus side branched into two lines and Daylight - I thought that it is just good to limit the light intensity and heat generation by connecting two rectifier diodes in series to Wiring for use in Position.
The same effect can be expected by using constant current Diode or resistance, but from the aspect of Cost surface and simplicity durability and suppression of heat generation, using three inexpensive rectification diodes I think that it is Simple to limit the current.
In addition, I saw the White lighting product of exactly the same appearance as this Rin Parts Rin Parts Micro LED Blinker Ver 1 at 475 yen at other site.
I do not know the reason for its cheapness, but there must be some reason for sure.
I will recommend to be used after being devised to suppress the heating value of Body itself which is interested in this Rin Parts Rin Parts Micro LED Blinker Ver1 including saying.
This Rin Parts Lynn Parts Micro LED Blinker Ver 1 is not sure where to make a maid in.
It is making, designing and price not like JAPAN.
Once installed in the Motorcycle, it is not easy to burn the LED, right?.
I think that it is necessary in advance.
Rectifier Diode is 1 pc in electronic parts PartsCenter etc.. I sell for 15 yen. (I use 1000V1AX 3 pieces)
.
View detail
RinParts Rin Parts Micro LED Blinker
【What made you decide the purchase?】
This RinParts MicroLED Blinker is an unusual Type LED Blinker among various commercially available Blinkers.
It's pretty cute, so I bought it.
【How was it actually used?】
While considering how to install it, it is occasionally lighting and playing, but this RinParts Rin Parts Micro LED Blinker is quite bright LED.
【Mounting was difficult?】
In order to install it, it will be to open a hole of Φ 10 mm or to use the existing Φ 10 mm hole, but I'm thinking where to put it.
We have not installed yet, but due to the structure the installation will be large and it will not be difficult.
【Please tell me the installation point and hang】
Since this RinParts Rin Parts Micro LED Blinker seems to be highly waterproof, it seems to be Large sturdy even if you install it without worrying even where it will hit the rain.
When installing, I think that installing in a good position of the wind street which is easy to dissipate heat and applying Loosen Tightening Lock tite to the Nut for fixing is Large Off Point.
[Is there anything I was disappointed about?]
As I knew, this RinParts Rin Parts Micro LED Blinker has only two wires, so I can only use either Blinker or Position lamp.
Although it is possible to make a circuit so that Blinker and Position lamp can be used together, Diode is required separately.
【Hope for Manufacturer - Please let me know if you have any improvement points]
Since it is a point, since it is now, Wiring is still appreciated, it is possible to have Tale lamp, Stop lamp and Wiring of Minus line as three lines from the beginning.
【Have you compared items?】
I compared it with various Blinkers observed by Net and Shop.
This RinParts Lynn Parts Micro LED Blinker gives orthodox and elegant light.
[Others]
Still for a while, I do not have the courage and opportunity to install this RinParts Rin Parts Micro LED Blinker in the Motorcycle, but let me report it again with Impression.
.
View detail
★ It's pretty that you make it round and Small
【What made you decide the purchase?】
Round at love at first sight Blinker pretty Small (Lol)
There was no necessity, but I bought it because it was cute.
【How was it actually used?】
Small is pretty and pretty, it is a blinker that you can use firmly with a lot of light intensity.
I tried energizing test, but it is dazzling light when energizing 12V.
【Mounting was difficult?】
This RinParts MicroLED Blinker Ver 1 Body is a product that can be installed easily by inserting it if there is a hole of Φ 10 mm and tightening with Reverse side from Nut.
The power source draws a line from BlinkerWiring of Motorcycle and Quantity : Pair (for Left and Right) It is easy because it just connects so as not to make a mistake.
【Please tell me the installation point and hang】
Body of this RinParts MicroLED Blinker Ver1 is made of Material : Since it is Aluminum, if you attach it to the Aluminum part of Motorcycle or attach it to a place with good wind, you can use it with the intended cooling capacity of the product.
If you apply Screw Loosening Prevention Agent to Gold Made Nut that stops at Reverse side, it will be hard to loosen so it is safe.
In addition, we sell that genus Nut in DIY Heat resistant Material : If you replace it with PlasticNut, even if there is no Screw loosening prevention agent, its heat resistant Material : As you tighten PlasticNut it will be fixed while being distorted by stress Material : PlasticNut becomes very difficult to loosen.
[Is there anything I was disappointed about?]
Although I did not understand it by appearance, the exterior was for Material : It was heavily unexpected because it is Aluminum.
【Hope for Manufacturer - Please let me know if you have any improvement points]
The appearance shape remains the same, I think that it can be used as an auxiliary light for Daylight and Stop-lamp if there are products with different luminescent colors.
【Have you compared items?】
Compared to various Blinkers of other companies, but there is not any other CustomizationBlinker finished compactly more cute than this RinParts MicroLED Blinker Ver1.
This RinParts MicroLED Blinker Ver1 is a very simple, rounded and lovely Blinker, and as a LED Blinker it is a very cheap Blinker as well as more than other companies' products in terms of price.
.
View detail
RinPartsMicroLED Blinker
【What made you decide the purchase?】
Although I did not have any use purpose in particular, the moment I saw this RinParts MicroLED Blinker Ver 1 with Net I tried to buy it as a design shape I like very much.
【How was it actually used?】
Although we do only the energization test for initial malfunction confirmation after arrival, it is a very bright LED for Small size.
【Mounting was difficult?】
The axis of this RinParts MicroLED Blinker Ver1 (neck) Since the part is in the Bolt state with a diameter Φ 10 mm, it can be installed and fixed easily with the attached Nut by putting it in a hole of a slightly larger diameter than Φ 10 mm in diameter.
【Please tell me the installation point and hang】
The axis of this RinParts MicroLED Blinker Ver1 (neck) The part other than Lens of the exterior is Aluminum for heat dissipation, so installing it in a good location on the wind street makes it possible to urge the heat radiation more effectively.
Wiring is Quantity : There is only 2pc, but Position lamp (Daylight) If you use it for both Blinker and Blinker it will be possible if you use resistor and rectifier Diode.
[Is there anything I was disappointed about?]
Although it may be said as expected rather than saying it is disappointing, this RinParts MicroLED Blinker Ver 1 gets quite hot as a whole if you energize continuously for 1 minute.
Position (Daylight) In using it, I think that it is better to use practical use after putting in resistance of Large texture and looking at the heat generation of Body.
Also, when using Blinker, turn ON / It is alternating and it is not always translating constantly and continuously Body is hard to get hot so I think that there is no problem for usual use as it is.
【Hope for Manufacturer - Please let me know if you have any improvement points]
It is the LED of the same form as this RinParts MicroLED Blinker Ver 1, and I certainly want you that there is Daylight of White color, Tale lamp of Red color, Stop-lamp, etc..
【Have you compared items?】
Compared to the appearance of several other Blinkers, I chose this unique design of this RinParts MicroLED Blinker Ver1.
.
View detail
★ cute ★ RinPartsMicro LED Blinker ★
【What made you decide the purchase?】
This RinPartsMicroLED Blinker Ver1 is a very Compact, Originality cute Design Blinker so I tried to use it once.
【How was it actually used?】
The light-emitting surface of this RinParts MicroLED Blinker Ver 1 is small, but it has a lot of light intensity and it is convex Lens so it has sufficient brightness.
Besides, since the Wiring section from Blinker Body has been subjected to a firm Waterproof treatment, you can safely install it anywhere.
【Mounting was difficult?】
I am Position (Steady light) And Blinker (Blinking) In the case of installation, when inserting the neck portion of this Rin Parts MicroLED Blinker Ver 1 into the hole of Φ 10 mm, it can be easily fixed using the attached Nut.
【Please tell me the installation point and hang】
It is very easy to install this RinParts MicroLED Blinker Ver 1 if you make the diameter of the hole for installation just a little Large.
In addition, the material of the same size as Nut of Gold belonging to used for fixing : If you bought Plastic Nut at your local DIY and use it instead of the included Gold genera Nut you can make it much lighter.
[Is there anything I was disappointed about?]
As I knew, this RinParts MicroLED Blinker Ver 1, Wiring is Plus (+) Minus (-) Quantity of : Since there is only 2pc, some modification is necessary so that it can be used for both Position and Blinker.
【Hope for Manufacturer - Please let me know if you have any improvement points]
In addition to the Orange emission color of for Blinker, if there are such as White color emission for Daylight and Red color emission for for Brake, I think that there are opportunities for future use in the future.
【Have you compared items?】
I compared it with various other LED blinkers.
The function of this RinParts MicroLED Blinker Ver 1 is nothing to replace, in particular, compared with the various LED blinkers of several other companies compared, but the appearance features are strong because the Originality is strong and it is pleasing.
.
View detail
It is super-discount, but there is no Zengzen problem !!
It is installation in ZOOMER
At first I was thinking that it would be bad for Sugo because it was too low price, but I have been riding almost everyday for over 3 months since purchase, but Zensen Large is durable
It can not be helped because it is a Blue light bulb, but depending on the angle you see Light is not on, the whole Light will look blue.
If Light goes on it will be a white-like light like a modern day
Although it is slightly uneven compared with NORMAL, it is Recommendation because it surely brightens
I am running with mesh Light Cover, but it was bright enough even at night, and I bought it and was right.
Even if it does not stop, I think I will buy it again
View detail
I was waiting for this kind of thing.
This product was purchased at HP's mail order of Rin Parts.
The assembling also has a polite instruction manual attached, it is possible to install without difficulty. Brightness is alright, I can not return to OEMHalogen anymore
Above all, Design was excellent, I got a punch right after a glance - - - w
Just well, it is said that it is the only defect, it may be the characteristic of the LED, but if it is right angle seen from the Rider, the car ahead seems to be quite dazzling, so I think that it is better to turn it downward a bit. Even if you turn it down somewhat, the brightness is enough.
Depending on the Fender you are wearing, it may be obstructed by the Fender quite well if it is of Normal stay, so you might as well take the risk and make it a Long Bracketver.
View detail
akarui
【What made you decide the purchase?】 Because it is very cheap. I think that LED's Tail bulb is the cheapest.
【How was it actually used?】 It is bright enough and practical.
【Was it difficult to install? (Hard parts case)】 it's simple.
【Please tell me the point of installation and hang (in the case of Hard parts)】 It is together with the normal Valve exchange. However, it is necessary to carefully handle the soldered part of the LED without putting much effort.
[Is there anything I was disappointed about?] There is none
【Hope for Manufacturer - Please tell me if there are any improvement points】 Parties cheap and usable are Large welcome.
【Have you compared items?】 There is none
[Others] Since white of License Plate Light is not included, attention is needed for a motorcycle with a vehicle inspection. Although it is a picture, when I took it on a day with a lot of humidity inside the garage, I feel like a mistreat Rears.
View detail
To ZOOMER's Custom
I think that it is a person appearing frequently in books etc in ZOOMER 's Custom, but from the other cheap LED Headlight Design is Parenthesis better so purchase here.
I thought that 10,000 yen was expensive for Headlight in myself, but from the satisfaction level it was cheap shopping!
Brightness is also pretty bright, and it is perfect at night..
I will look back over it..
This Recommendation.
View detail
To ZOOMER's Custom
Type installed under standard Seat Type.
It is very integrated with Blinker and very Parenthesis!
Smoke tightens the tail and the LED glows with a really astringent feeling.
Blinker also blinks in half The unexpectedness is surprising around!
This price is bought with Quality and installation cheapness and Impact.
This Recommendation.
View detail
Cheap and bright!
【What made you decide the purchase?】
- Quantity : 1 Set of 2pcs. In 1 pc. It is almost the same amount as.
【How was it actually used?】
- Bright, improved visibility.
- Hue of the degree not dazzling for oncoming vehicles.
[Is there anything I was disappointed about?]
- Caution note etc etc. There was nothing at all (Since it is cheap, charming).
【Hope for Manufacturer - Please let me know if you have any improvement points]
- Since it is Valve, it should be noted only with the note that it is not touched with bare hands.
【Have you compared items?】
- [M & H pines Stripe] PH7Halogen bulb Standard
[Others]
- It is ZOOMERExclusive Design, but if you can hardly use it for Motorcycle using Light of PH7.
- Because it is soon to use, I do not know the durability.
View detail
To light intensity Up.
It is almost possible to use it for Motorcycle using Light of PH 7 Type. Quantity : 1 Set of 2pcs. So one can be taken as a reserve and the price is cheap and the brightness is also pretty bright so it was good. View detail