Reviews
Since M5.
I bought it because my homemade Fender Eliminator cracked when it was brittle.
I chose this one because Screw was M5.
It is a very normal reflector with no particular problems.
View detail
Simple and Stylish
It is simple as a bracket and the reflector is thin, so I am satisfied with the reflected look.
It is not cheaply made and is solid.
View detail
License Plate Light
I bought this product because I needed a License Plate Light for a small custom job, and I think it is easy to install, but I think it is easy to break if you bump it a little bit. View detail
Ruckus luggage rack
The bike luggage rack was just as specified. Good quality materials and fitted perfectly. The ordering process was straight forward and the delivery time was quick and reliable. I would definitely recommend using webike and will be ordering from them again in the future. View detail
Used with Fender Eliminated KSR80
I bought this product because the KSR80 I bought used was Fender Eliminator, but it did not have Reflector.
You can install it between the License Plate and the Bracket without any problem even if you are a beginner.
The price is right for Universal and the quality is a bargain.
View detail
ZOOMERCustom
I'm glad it's not easy to find. View detail
Hook
It's a decorative Bolt, but it's also an excellent Loading Hook
It may be possible to install it in a different location depending on the car model
Practicality is enough But you need to be careful not to interfere with the recognition of the License Plate
Packaging Condition
Resin Washer◎
A few line grooves have been machined, but the Gap is …
(Program error on the Z axis?)
View detail
Best Online Shopping, Very Very Fast Shipping. For My Zoomer First Step MOD. This a Quality Product, Easy Install and Look Good !!! Thanks Webike
Best Online Shopping, Very Very Fast Shipping. For My Zoomer First Step MOD. This a Quality Product, Easy Install and Look Good !!! Thanks Webike View detail
Rin Parts Rin Parts Square Type LED Reflector
I was looking for Tale lamp for expansion of Motorcycle variously with Net, Motorcycle parts Shop, etc., but after all I decided to purchase and install this RinParts Rin PartsSquare Type LED Reflector which I sold at Webike after all.
Motorcycle In front of it, Daylight and Blinker are lit up as Position Lamps, which is a reasonable self Appeal power, but behind Motorcycle, the tail Stop lamp is Position lamp and the Appeal force behind is too weak is.
This RinParts Rin PartsSquare Type LED Reflector Material : Quantity on Aluminum Base : Pair (for Left and Right) Quantity : 2pc. Set installed, I decided to install its Base on Rear Carrier of Motorcycle and increase the Appeal power to the rear.
In order to suppress solder peeling of the foundation by any chance due to vibration and overheating, rectify Diode (1000V1A) 1 pc. (Separately purchased 1 pc. 15) I put it in Wiring, but the top of the photo shows the Stop lamp lit - The bottom of the photo shows the Tale lamp lit. Especially no problem has been raised in the decrease of the light quantity and Appeal force behind.
Such a Lamp which had been installed before was supposed to be attached with the dimension to be refrained, but it was broken by a bump at the convex part of the fallen road surface and it was disconnected.
In anticipation of this, this time it is more Quantity than the previous Base width : Pair (for Left and Right) I made the dimension of 25 mm shorter, so that I did not destroy it the same way even if I overturned.
This RinParts Rin PartsSquare Type LED Reflector is a very inexpensive product, but since it is one time to replace it if it breaks it is not broken and there is nothing better to break.
This RinParts Rin PartsSquare Type LED Reflector is cheap so I am Quantity : 2pc. Set is used.
Moreover, because it seems there is no durability low because it is inexpensive, I use this RinParts Rin PartsSquare Type LED Reflector with confidence.
Installation of this RinParts Rin PartsSquare Type LED Reflector to the base part is also not difficult, it is not difficult, and although there are 3 wires, it can easily connect to a for BrakeWiring of the Motorcycle Body with the plug terminal etc. It is easy to install I think that it will belong to the category.
I attached this RinParts Rin PartsSquare Type LED Reflector and confirmed the lighting many times at night, but the Tale lamp looked like it looks like an OEM Product in the dark.
.
View detail
Rin Parts Rin Parts Square Type LED Reflector
【What made you decide the purchase?】
When extending Rear Carrier exclusively for Long touring, OEMTail lamp became hard to see, so we added a round Tail lamp.
Since the mounting base was overhanging too much and broke the round Tail lamp at the time of falling, improve this time to make the overhang small and look for a cheap and easy Tail lamp in a shape other than a circle If so, I found this RinPartsSquare Type LED Reflector.
【How was it actually used?】
Immediately, I tried installing.
Although there is concern about solder attachment peeling due to vibration, for now it plays a role well in tune.
At this price, Reflector - Tail lamp - It is surprising fact that there are three functions of Stop lamp.
【Mounting was difficult?】
Material for installation : Since we used Aluminum Base, it was easy to process and the installation was Smooth.
【Please tell me the installation point and hang】
On the core of the Reverse side of this RinPartsSquare Type LED Reflector there is Φ 5 mm Bolt for mounting.
Wiring comes out three lines near one end.
And since convex for fixing Body is out near the other end, Material : A total of three holes are required in the Base of Aluminum.
Because we need holes of about Φ 5 mm each, here Φ 5. Make 3 holes in 5 mm holes in required locations.
0. Since we can afford a margin from mounting error by responding with 5 mm Large eyes hole, we will be able to install properly when we fix this RinPartsSquare Type LED Reflector.
Millimiri kitchenly and Φ 5. Although it may be processed 0 mm, it is highly likely that it will not be entered at once with experience because of experience.
If it is easy to install it in a short time, we recommend that it be mounted and processed with error margin.
[Is there anything I was disappointed about?]
As of now, it is Items which can satisfy Large about price, capacity and quality.
【Hope for Manufacturer - Please let me know if you have any improvement points]
I do not want peeling by Solder attached by vibration.
I want you to last long.
【Have you compared items?】
It compared with RinParts Round LED Reflector.
Just because the shape was different, both price and price were the same, so this time I chose this rectangular shaped RinPartsSquare Type LED Reflector.
.
View detail
RinParts Rin Parts Square Type LED Reflector
【What made you decide the purchase?】
Previously, with the Round Type LED Reflector attached, it was broken and damaged, so this time I tried this rectangular Rin Parts Rin Parts Square Type LED Reflector.
The price was also cheap, so Body was thin, so it was a product that seemed easy to install so I decided on this.
【How was it actually used?】
It seems to match the mounting base, so it looks bad.
The Reflector ability, Position and Stop lamp LED emission quantity are also good.
【Mounting was difficult?】
I did not feel difficulty in particular, but I installed it after considering the mounting dimensions and Wiring dimensions a little.
【Please tell me the installation point and hang】
Because it is a special Stop-lamp auxiliary light, we installed it to make it stand out even a little.
Also, in order to attach this Rin Parts Rin Parts Square Type LED Reflector to the Base, you have to open three Φ 5 mm holes of Wiring hole, fixing hole and rotation prevention hole.
We measure the dimensions and mark it and drill, but first open the fixation hole in the middle and pass it once, then Quantity : Pair (for Left and Right) If you reconfirm the hole position of the hole and drill it, you can install less Gap.
[Is there anything I was disappointed about?]
I installed it, but it was too normal.. I do not feel any discomfort.
It is a good thing that there is no sense of incompatibility, but it is too ordinary and it got somewhat unsatisfactory.
【Hope for Manufacturer - Please let me know if you have any improvement points]
I want this product if it has the same shape as Rin Parts Rin Parts Square Type LED Reflector and it can be used for Orange color Blinker.
【Have you compared items?】
I tried to compare with other companies' LED tail lamps, but I liked this Rin Parts Rin Parts Square Type LED Reflector at the lowest price.
[Others]
This Rin Parts Rin Parts Square Type LED Reflector is a very inexpensive product but it is a normal Tale lamp with a very Sharp feeling of elegance when trying to install it without any cheapness.
It has a lot of light at the time of light emission so it is very bright so it can be recognized very well, it is a perfect product as Tale lamp and Stop lamp.
.
View detail
Rin Parts Rin Parts Square Type LED Reflector
【What made you decide the purchase?】
The cheapness of this RinPartsSquare Type LED Reflector = affordable price is a deciding factor.
【How was it actually used?】
There is no trouble, Position lamp and Stop-lamp are lit properly properly.
【Mounting was difficult?】
Material : I installed it on Aluminum Base
, This RinPartsSquare Type LED Reflector needed to drill three holes for Screw, Wiring, and fixed claws.
It was not difficult though it did not require too much precision, but it was just annoying.
【Please tell me the installation point and hang】
Apart from the hole for Screw, if you open it with a slightly larger grade, you can flexibly install it so you can easily install it.
[Is there anything I was disappointed about?]
This RinPartsSquare Type LED Reflector with Quantity : 2pc. Set purchased 1 pc. There was a lot of Wound on the reflective surface of.
I do not know whether the expression of disappointment is correct, but it is a fact that I felt like I was betrayed.
【Hope for Manufacturer - Please let me know if you have any improvement points]
My Motorcycle is an Off car so especially this RinPartsSquare Type LED Reflector attached to Tail will soon be full of Wounds at any rate ...
But, when it is brand new it is shock that the reflective surface is full of Wound. I want you to manage products properly.
【Have you compared items?】
Multiple companies (RinParts) Compared with the LED Reflector of the same function to sell.
But they were all Round LED Reflectors.
■ The square shows that the appearance of this RinPartsSquare Type LED Reflector is White and Red (Light is red color) There was only so, last time ● Round LED Reflector (Red) In some cases I was wearing this ■ This rectangular RinPartsSquare Type LED Reflector (Red) I selected.
[Others]
This RinPartsSquare Type LED Reflector for Motorcycle's Tail Quantity : Pair (for Left and Right) It attached to the Tail lamp's Position and Stop-lamp as an auxiliary light and it was better than the last round type for this RinPartsSquare Type LED Reflector's square ■ Tail part looks like Sharp and Parenthesis is good It became a feeling..
.
View detail
★Square Type LED Reflector★
If you add Rear Carrier and install Large Capacity Rear box, it will be difficult for the Stop lamp to confirm from the following car with a high car height, so use this phosphorus PartsSquare Type LED Reflector to assist the Stop lamp Add lights (repair) Did.
In detail, similarly, the previously added Round TypeStop lamp (● ● ●) Quantity is : Pair (for Left and Right) It was 20 mm long, so Left bounced backwards Willy barely struck the ground and it was destroyed. (Overloading also causes)
This time, Base is Quantity : Pair (for Left and Right) 20mm (Total 40 mm) Shrink and renew this PartsSquare Type LED Reflector (■ ■ ■ ■) It was a repair that I used to repair.
Although it takes time and effort to restore, this phosphorus PartsSquare Type LED Reflector is very cheap and easy to enter, so repair costs are not to be Large.
Quantity : 2pc. I bought it but 1pc. It was a pity that the reflective surface of the Wound was full of Wound, but I used it as it was no problem with the lighting state.
There is a rumor about solder peeling, but I am a competitor (Suzuka Cere ○ ○. ○ Mr.) was actually experienced with expensive LED products.
(The product did not improve so easily and repeatedly returned and exchanged repeatedly. )
However, even now the reason for that is long-lit (Position) It can be inferred that solder will be easily peeled off due to heating and continuous vibration.
In response we can lower the heat generation temperature when Position light is emitted by lowering the current lower than the prescribed value, so in case of emergency, bite the rectifier Diode between Wiring of this phosphorus PartsSquare Type LED Reflector came.
Luminous power will be reduced a little, but rectification is insurance against durability so it can not be helped.
Still, this phosphorus PartsSquare Type LED Reflector (Quantity : Pair (for Left and Right) As shown in the picture, Motorcycle's MainLEDStop lamp (Photo Center down ▼) It is the amount of light that will not be defeated.
This picture is in the Position state, but the Stop lamp glows brighter more.
Because the color of light looks the same color, it does not feel strange at all..
Although it will not be destroyed in the future, even if it falls down, I improved rectification to a strong durable size and also applied rectification insurance, but I think that it is the most important mental attitude that does not overturn with overloading.
safety first
.
View detail
★Reflector★Position lamp★Stop lamp
I am on HONDA's CRF 250 L.
Rear is a Fender Eliminator and Stop lamp is also exchanged for Other Company Product.
Further extension of the OEM's Rear Carrier so that the Rear box is to be placed behind, since the Stop lamp became difficult to understand from the back ‥
I thought that this was dangerous I brought the Bracket out from the Rear Carrier extended as an auxiliary light for the Stop lamp and made Base and increased the auxiliary lamp Stop lamp.
I also secured cognitive safety from the back and loaded a lot of luggage and went to Hokkaido Touring where I got overloaded and Motorcycle collapsed on the STAND side Left diagonally backward in Willy state, Stop lamp destroyed every BaseGold object.
After returning home, to repair it, this time I use this phosphorus PartsSquare Type LED Reflector to rebuild the ■ ■ auxiliary lamp Stop lamp, but in order to install this phosphorus PartsSquare Type LED Reflector, it is a little less than Φ5 mm for the BaseGold object Large I have to open three holes.
(1) Body fixing M5 hole for Screw to pass through (Nut fixed)
(2) Wiring (BlackRedGreen) Hole to pass
(3) Body Insert the ledge behind the body to prevent the body from turning
I found the vibrating base etc. etc. I thought that I could wipe out the worry of solder peeling as a vibration mitigation measure, when further fixing the body Cushion (1mm) I use Double-sided Tape with BaseGold thing.
While carefully devising and devising this Rin PartsSquare Type LED Reflector we are Wiring, but unfortunately it will immediately destroy depending on how to overturn.
If you are saying such a thing, you will not be riding a single car, but safe driving (To not topple over) I have never tried it..
It is safe behavior for me to install this phosphorus PartsSquare Type LED Reflector as an auxiliary lamp Stop lamp.
Those who feel that it is difficult to recognize Stop lamp from behind your own Motorcycle, by all means this Rin PartsSquare Type LED Reflectoretc. Use Safe for backward Appeal (Auxiliary lamp Stop lamp) How about trying to expand?
Although there is a fear of breakage destruction due to the durability of the product and falling, in order to reduce the fear and the probability that you and Motorcycle will collide with the following car from the rear, it is absolutely necessary backward Appeal.
It is too late since the accident happened.
.
View detail
★ ☆ LED Reflector ★ ☆
This RinParts Rin PartsSquare Type LED Reflector has 24 built-in LEDs.
As you can see from the Left, there are 4 vertical - 3 vertically - 4 vertically - Vertical Quantity : 2pc. Set - 4 vertically - 3 vertically - It has become an array called vertical 4.
The middle is vertical Quantity : 2pc. Because it is only Set, I feel a little discomfort.
This RinParts Rin PartsSquare Type LED Reflector, Wiring is the three colors BlackRedGreen.
As usual, Black's Wiring is Minus (-) is.
Green color Wiring is Position lamp, Red color Wiring is Stop-lamp.
The light quantity of Position lamp is 7 in Stop-lamp / It is about 10, both of which are bright enough.
This RinParts Rin PartsSquare Type LED Reflector is new but Reflector (Light emission) There is a lot of Wound on the surface and the arrangement of the LEDs is vertically only in the middle Quantity : 2pc. It is somewhat mindful that it is only Set, but it is not particularly a problem of Large.
Functionally, 24 LEDs play the role of Position lamp and Stop lamp well, so only durability is the problem.
As in other people's Impression, this phosphorus PartsSquare Type LED Reflector vibrates etc etc. The possibility of solder peeling of the inner base can not be denied by.
Even though it is cheap, the labor of the installation work is not proportional to the price of the goods.
With cheap worse or bad, replacement work can be troublesome.
We are assuming that it will overturn and break, but we are prepared for breaking or repairing, but we are honestly capping the foundation peel without relation to impossible to exchange goods or cheap price. I want it..
Even if it is slightly expensive, it does not matter if the quality is bad a little, but it is not easy to just have durability even if it is cheap.
(There are also expensive and durable products in the world, though. )
In order to confirm the initial malfunction, I tried to energize this phosphorus PartsSquare Type LED Reflector and light the Position lamp and Stop lamp, but there was no particular abnormality.
At the moment there seems to be no bug related to durability.
This phosphorus PartsSquare Type LED Reflector thinks that it is a product that is not so bad for price as long as it can confirm durability.
I feel corporate effort at this common price.
.
View detail
Rin Parts Rin Parts Square Type LED Reflector
This Rin Parts Rin Parts Square Type LED Reflector's Largest Large Attraction is Destructive Cheap (Lol)
Rin Parts Rin Parts Square Type LED Reflector is suspected of peeling Solder on the basis of cheap price, but it is common in troublesome peeling of Solder from the foundation even for expensive products in the world.
It is possible that it will be too bad.
It is a preconceived prejudice that seems to be bad just because it is cheap.
This Rin Parts Lynn Parts Square Type LED Reflector thinks that the three points function of Position lit, Brake lit and Reflector are condensed and it is more than the price.
Due to product management problems, there were many Wounds on the reflective surface, but that is a different story from the capabilities of this Rin Parts Rin Parts Square Type LED Reflector.
Because this Rin Parts Lynn Parts Square Type LED Reflector is cheap, it is a promising pleasant feeling that you can carefully attach and wired and handle various experiments.
Moreover, since it is LED emission, it is a flashing flicker, it is a strong straight light, so Merit is easy to recognize and confirm the red color of the LED even from the far side.
For the destructive cheapness, it is a solid Reflector that can not be destroyed so it even feels external toughness.
The firm making is becoming a calm existence as if it is attached to the Tail of Motorcycle and it is felt as a conventional product.
Backwards self Appealetc. Stop lamp for - We recommend that you purchase this Rin Parts Rin Parts Square Type LED Reflector by all means when adding Tail lamp.
Because it is a cheap and easy-to-install product, Customization can be added even for beginners.
.
View detail
Rin Parts Rin Parts Square Type LED Reflector
The dimensions of each part of this Rin Parts Rin Parts Square Type LED Reflector is ‥
Reflector dimensions are 84 mm X 30 mm X 3. 5 mm, Base dimensions 91 mm X 36 mm X 6. It is 5 mm.
Reflector (Light emission) Together with the base and base thickness is 10 mm.
Product information at the time of purchase includes Size : It was about 89 mm X 35 mm X 10 mm.
I trust the publication dimensions of this Rin Parts Lynn Parts Square Type LED Reflector, and in advance to use it as a mounting base, we are going to use a 35 mm wide Material : I bought an Aluminum Flat bar for 1000 yen, but the dimensions of this Rin Parts Rin Parts Square Type LED Reflector arrived at hand are slightly smaller (1mm) Because it was different, Material purchased for 1000 yen for installation base : Aluminum Flat bar has become useless shopping.
Since the posted dimensions and the actual dimensions are slightly different, please purchase on that point of consent.
It is unavoidable that the price is cheap, but Reflector (Light emission) On the resin surface of the section there were a lot of Wounds that I could not think of as a brand-new product.
It is a product with product management problem.
I am trying to use this RinPartsSquare Type LED Reflector as an auxiliary Lamp for the Off-road motorcycle Stop lamp, so it has become such a usage that it will be full of damaged Wound or broken by several falls So, Reflector (Light emission) I used it even though I used Wound all over the place ...
Surely, I think that most people who care about Wound are worried, I think that it is WoundLevel which will surely accept you if you ask Webike for an exchange.
In any case, this Rin Parts Rin Parts Square Type LED Reflector is an item not under product control, so if you would like to purchase and a little difference in dimensions and Reflector (Light emission) Those who are concerned with the Wound of the surface recommend that you exclude this RinPartsSquare Type LED Reflector from the target from the beginning.
I will destroy it immediately by Dirt driving, so this Rin PartsSquare Type LED Reflector, which is cheap and easy to obtain with this finish, is enough.
I think that it is a good product if it can be used for more than 1 year.
.
View detail
RinPartsSquare Type LED Reflector
This RinPartsSquare Type LED Reflector ProductNo : For 1108419, Lens color is on Red and Color is Red.
(Besides, Lens color is Clear - Lighting color has Red. )
Reflector function and Small lamp function (70% light amount) And Stop-lamp function (100% light amount) 3 functions (with Reflector function) - It is Square Type LED Reflector of RinParts with Small & Brake interlocking type.
Size is approximately 89 mm X 35 mm X 10 mm thick, but when we arrived the product arrived, I felt it was Large as if I measured it beforehand by measuring with a ruler.
I am Quantity : 2pc. Set, backward Quantity : Pair (for Left and Right) As it is attached to it will be a firm Appeal.
Emission area of ??this RinPartsSquare Type LED Reflector (About 89 mm X 35 mm) 24 LEDs per side are lit in the part.
As you try to make it light, you can see that the LED is arranged with a fairly fine Pitch.
It is often finished enough to admire that it can be turned to the market at this cheap price.
Bolt for fixing is M6 and can be tightened with the included Nut.
This RinPartsSquare Type LED Reflector's Reverse side mounting surface part has a rotation stopper Pin so you can use it by drilling a hole in the mounting Base side, but I will also take measures to reduce vibration to this RinPartsSquare Type LED Reflector Based on Cushion (1mm) We installed this RinPartsSquare Type LED Reflector using Double-sided Tape with.
As of now it has been used successfully without any problems, but it is a little uneasy product because there are rumors of Led Base's Solder exfoliation.
It is other than having to break in half a year or a year.
If I do that, I need it from the beginning.
Even if the price is doubled, we choose products that will not break.
Basically it is said that LEDs can be used permanently, but that is not the case.
It is only said to have a longer life span than fluorescent lights, valves and light bulbs.
So, as for this life expectancy for this RinPartsSquare Type LED Reflector, I want at least 2 years or more.
The price of this RinPartsSquare Type LED Reflector is cheap, but at least for 2 years it must be able to be used without any problems - - - Repair and replacement are tough to be honest.
Even if it does not break, if the good part is broken and it takes time and effort to repair it, I want to keep other places firmly in time and time.
.
View detail
Rin Parts Square Type LED Reflector
The luggage Carrier was slightly lengthened by the amount of Stop lamp after the following DumpTrucketc. I got this Rin Parts Square Type LED Reflector as an auxiliary light for the Stop lamp because it got hard to see from a vehicle with a high driver's seat.
Previously, ○ Round Type Stop lamp is backward Quantity : Pair (for Left and Right) We were installing to expand to Crash but because it crashed it crashed, so this time □ This Sin Type's Rin Parts Rin Parts Square Type LED Reflector Commerce Product No : Quantity 1108419 : 2pc. Set purchase using backward Quantity : Pair (for Left and Right) It is attached to.
Although Solder peeling symptoms of Led Base were described in Impression ahead of the other person, I am worried that the story is possible.
(I also experienced with the product of another company. If you sell items that break soon,. )
I believe this Rin Parts Square Type LED Reflector, although I am a little worried, I purchased it.
There was no problem with the lighting test at packaging opening, but in the future running use and long time energization etc etc. With regard to the obstacle of this Rin Parts Square Type LED Reflector in the future it will be an important practical observation from now on.
In particular, my Motorcycle is Off car and I run off-road so I have more vibration than Road motorcycle.
The possibility that the Solder peeling of this Rin Parts Square Type LED Reflector appears conspicuously will be Large.
Indeed, I will try to use this Rin Parts Square Type LED Reflector for a while and then let me report on Impression again.
Even if the goods themselves are cheap, despairing and Wiring is a translation that takes time and labor, so no matter how cheap the price is, it will be troublesome for a cheap and bad product. It is annoying as a consumer.
The installation of this Rin Parts Square Type LED Reflector can be easily installed with the included Nut, and I think that it may be possible to open and attach the hole for the fixed pin to Base, but I am a Double-sided Tape (Cushion material thickness 1 mm) I installed it easily with the included Nut using.
(I have made it easy mounting conscious of the exchange in case of emergency equipment failure. )
I tried to install & run at night, but the function of this Rin Parts Square Type LED Reflector is that the Tale lamp light intensity and the Stop lamp light intensity are satisfactory brightness, the difference of that light also flashes with a good feeling Give me.
It is truly an LED. Valve Sphere etc. Compared with the beauty of clear light with high rectilinearity and fast lit flashing response is preeminent.
.
View detail
The color and the form were cared about them and chosen. Since it was legally required, it purchased. Since required brightness was secured, it is satisfied. A dissatisfied point is conspicuous too much for a while with a white light for LED. I think
The color and the form were cared about them and chosen. Since it was legally required, it purchased. Since required brightness was secured, it is satisfied. A dissatisfied point is conspicuous too much for a while with a white light for LED. I think that the cleaned Motorcycle is suited. View detail