Reviews
I am satisfied personally.
Impre this time.
The installation itself is not difficult to do so and it can be assembled without any problem especially with the Instruction Manual. However, a very simple Instruction Manual (How to attach Color of Front wheel mainly) Since it is only attached, let's check the assembly around MASTER firmly.
For Wheel, Fork, Caliper things are not bad and it is satisfying.
About Brake hose, Banjo, Air valve it's kind of like saying something like this.
So, I got some points to worry about.
Brake hose is quite long even at OEMHandlebar. Thanks to illegal handling (Do you understand if you can see the picture)
OEMHandlebar is about 5 centimeters shorter than the attached one? Who is lowering the position of Handlebar with bar handle or the like would be better if you prepared a shorter one separately ...
I can understand it by looking at the product photo, but only one Air valve is attached. Since the attached item becomes a thing of Sandwiching Type with Nut, it may be better to obviously prepare two different types of fit type.
I thought that there were two clearly attached, very troubled. I do not want to take the trouble to remove it from the original Wheel w
Also, if you try to insert air with gasostas etc. before and after Wheel, I think that it is mostly that Inflator's head does not enter because of the shape of Wheel, so it is more convenient for someone who bought the L extension. I do not need it..
Anyway, what I thought is like this.
Personally satisfied!
Since it will be something that I bought a while ago, it is somewhat Spec. Change etc etc. There may be so be worrisome ...
View detail
I was waiting for this kind of thing.
This product was purchased at HP's mail order of Rin Parts.
The assembling also has a polite instruction manual attached, it is possible to install without difficulty. Brightness is alright, I can not return to OEMHalogen anymore
Above all, Design was excellent, I got a punch right after a glance - - - w
Just well, it is said that it is the only defect, it may be the characteristic of the LED, but if it is right angle seen from the Rider, the car ahead seems to be quite dazzling, so I think that it is better to turn it downward a bit. Even if you turn it down somewhat, the brightness is enough.
Depending on the Fender you are wearing, it may be obstructed by the Fender quite well if it is of Normal stay, so you might as well take the risk and make it a Long Bracketver.
View detail
Cheap but good Grip
It is quite cool for the price..
Bar End is integrated but it is okay to save labor
However, I will move a little boyobuyo.
Since various colors are being lineuped, it may be good to buy some color and change it in the mood.
It is recommended.
View detail
I bought it for Long wheel base
I bought it for Long wheel base.
There is no place to complain about this.
I think Cost performance is good..
It is recommended.
If you have lowered Handlebar with Separate handle, you can do it Long wheel base or OEM Length well.
This Length is a bit too long.
View detail
Graduated from KICK of NORMAL's miserable Design
【What made you decide the purchase?】 Since Point of Web! Ke gotten, I changed Kick starter
【How was it actually used?】 I like the color of Design and Black Anodized
[Is there anything I was disappointed about?] nothing special
【Hope for Manufacturer - Please tell me if there are any improvement points】 No particular
View detail
akarui
【What made you decide the purchase?】 Because it is very cheap. I think that LED's Tail bulb is the cheapest.
【How was it actually used?】 It is bright enough and practical.
【Was it difficult to install? (Hard parts case)】 it's simple.
【Please tell me the point of installation and hang (in the case of Hard parts)】 It is together with the normal Valve exchange. However, it is necessary to carefully handle the soldered part of the LED without putting much effort.
[Is there anything I was disappointed about?] There is none
【Hope for Manufacturer - Please tell me if there are any improvement points】 Parties cheap and usable are Large welcome.
【Have you compared items?】 There is none
[Others] Since white of License Plate Light is not included, attention is needed for a motorcycle with a vehicle inspection. Although it is a picture, when I took it on a day with a lot of humidity inside the garage, I feel like a mistreat Rears.
View detail
Easily change to popular Style! But - - -
【What made you decide the purchase?】
Parallel LED Headlight popular with ZOOMERCustom was attracted to the convenience of Bolt-on at a reasonable price.
【How was it actually used?】
On a practical side, it is very bright and you can make StyleChange easily, but again HI of the optical axis / I am annoyed because I can not switch LOW.
Although it is very bright, it is necessary to mount it considerably downward considering the safety of the oncoming car, but it is a waste that the brightness of the corner is not lived (Lol)
I think the appearance is very good with warbone.
【Was it difficult to install? (Hard parts case)】
The Instruction Manual was also attached and it was easy.
【Please tell me the point of installation and hang (in the case of Hard parts)】
I will tighten Bracket with Bolt holding the Fork together, but if you work in turn, one side, one side, Large was durable without having to upgrade the front.
Bolt which fixes LightBody and Bracket is just a little too long, since only the attached Washer 2 species has bottomed out and is gradual, Quantity : Pair (for Left and Right) Already Quantity : 1pc. I added a 6 mm hole Washer and it was able to fix it tightly.
[Is there anything I was disappointed about?]
Although the product arrived first was able to be used, such as being partly cut out by cutting out a part of the product at the time of Gate processing of resin Parts, since Hapa gap product arrived aesthetically, it was exchanged for Web! Ke As a result of having asked Manufacturer to return it by putting it out for inspection, the answer returned from Manufacturer after being kept waiting for quite a long time was very disappointing at the judgment of good product. So web! Ke sent us the inspected products with our own standards, I am very grateful.
【Hope for Manufacturer - Please let me know if you have any improvement points]
I would like to raise inspection standards a little more. As stated below, competing products are part of the first-class Manufacturer. There are so many expensive things, so I sell it cheaper than others so I feel a compromise by many products that this is OK. It is regrettable only for Manufacturer who have very good planning products.
【Have you compared items?】
Headlight kit of certain well-known ZOOMERCustom Shop I compare it with this, but I feel a sense of cheapness, but I feel a sense of high price from the actual product.
[Others]
None.
View detail
Simple and good feeling of lowness in car height!
【What made you decide the purchase?】
It is a compact shape.
Bar end Because of the nature of the mirror, the width of the car will inevitably widen, but for this product it will be the smallest limit.
【How was it actually used?】
Although the specular surface is Small Shark, the convex mirror spec not specified in the item description Spec. Thanks to that the visibility is wide and good. Bar end mirror So, there is a benefit beyond thinking that it can indeed be installed in a good mounting position on the back of the mirror.
It is affordable product but I do not feel cheap,
It's pretty satisfying that it appears more than I had imagined the feeling of lowness in the car height with a simple look.
【Was it difficult to install? (Hard parts case)】
Throttle cone and Grip were both very simple because we were planning to install Bar End and changed to Penetrating shaped objects, but if you have not made any changes etc, please do the processing or the above mentioned corresponding to Penetrating shape Parts Change is required.
【Please tell me the point of installation and hang (in the case of Hard parts)】
To happy newbies, this is also not mentioned in the item description, but Hexagonal WrenchQuantity necessary for installation of this product : 2pc is attached.
Bar End It is a simple hang which is common in products, but at the time of inserting the installation part into the Handlebar, it has resistance to some extent and it is press-fitted and then inserted, lightly Pliersetc. Hold on (Wound, like no deformation) , It would be better to close down with the included Hexagonal Wrench.
Even if you plug in loose state you will continue to spin around Hexagonal Wrench forever.
[Is there anything I was disappointed about?]
It is not something like expectation ...
When traveling at night, than usual Mirror,
This may also be due to the low mounting position of the Bar end mirror, but the light of the following vehicle can feel dazzling.
【Hope for Manufacturer - Please let me know if you have any improvement points]
For the glare that may be caused by the low installation position of the above-mentioned Bar end mirror and the appearance improvement, the mirror surface Blue MirrorVer. I want.
Resin Parts are adopted in the mounting part, but even if it is quite tightened it tends to move due to the low resistance of the resin, so the common Material : You may choose Rubber's things.
【Have you compared items?】
Takatsu Trial mirror (Reverse attachment)
[Others]
None.
View detail
Angle of the bar gives a relax posture on the grip. The finishing chrome are of fabulous chrome with the Knife Cut design giving the slick semi low angles. Length are perfect not too long and not too short where a few clamps of purpose as such Hp mount, G
Angle of the bar gives a relax posture on the grip. The finishing chrome are of fabulous chrome with the Knife Cut design giving the slick semi low angles. Length are perfect not too long and not too short where a few clamps of purpose as such Hp mount, GPS Mount or any other etc mounts acceptable. View detail
It is easy to use and convenient
I do not feel bad texture and I think Simple is fine.
Although the attached Screw may not be enough depending on the model, I think that it is OK because everything can be used with 6 mm Screw.
View detail
Exhaust Cover
It was written for ZOOMER, but Today (af67) I was able to attach it!
Just remove 8 mm Bolt so you can easily change if there is a tool!
View detail
Cospara is good
I feel I got a little brighter than OEM. I think that the durability is down by that amount. I thought that it was a part for people who do not have the opportunity to ride frequently, that there is little running at night. View detail
To ZOOMER's Custom
I did not have an Orange so I purchased Gold. But it was good as it was quite deep gold.
Since Bar End is an integrated type, it moves after a bunyo buno moves, but it does not matter.
Rather, I am surprised that this quality is at this price.
Satisfaction is high so it is Recommendation.
View detail
To ZOOMER's Custom
I think that it is a person appearing frequently in books etc in ZOOMER 's Custom, but from the other cheap LED Headlight Design is Parenthesis better so purchase here.
I thought that 10,000 yen was expensive for Headlight in myself, but from the satisfaction level it was cheap shopping!
Brightness is also pretty bright, and it is perfect at night..
I will look back over it..
This Recommendation.
View detail
To ZOOMER's Custom
Purchase for Zoomer's Front Disc
I do not know if the number of GEAR is the same as OEM, but at the Digital meter of Mukawa, when counting the number of GEARs when speed adjustment, since the number of GEARs was counted, the Axle side was eighteen Meta side.
OEM should have Seal, but I wanted it to be attached to this.
It is Recommendation for the time being because it does not start with this.
View detail
To ZOOMER's Custom
Type installed under standard Seat Type.
It is very integrated with Blinker and very Parenthesis!
Smoke tightens the tail and the LED glows with a really astringent feeling.
Blinker also blinks in half The unexpectedness is surprising around!
This price is bought with Quality and installation cheapness and Impact.
This Recommendation.
View detail
It is good in the same form as OEM
Buy for ZOOMER Front Disc.
It is good with the same design as DIO's OEM.
Oil tank's position was in the way for my Separate handle.
I think that others can use it for the price.
View detail
Fits: HONDA ZOOMER(Ruckus)
Purchase for Front Disc
I bought it for Front Disc conversion.
I tried to do this until I tried installing it because I do not know what will happen to Hose's handling, but when I installed it did not match the mounting angle of the Master cylinder I bought together, it became a feeling of jumping out with Beyon before.
I regret that I should have changed the type of L-shaped Banjo
But things are not bad. I think that it is cheap and user-friendly.. This Recommendation.
View detail
Cheap and bright!
【What made you decide the purchase?】
- Quantity : 1 Set of 2pcs. In 1 pc. It is almost the same amount as.
【How was it actually used?】
- Bright, improved visibility.
- Hue of the degree not dazzling for oncoming vehicles.
[Is there anything I was disappointed about?]
- Caution note etc etc. There was nothing at all (Since it is cheap, charming).
【Hope for Manufacturer - Please let me know if you have any improvement points]
- Since it is Valve, it should be noted only with the note that it is not touched with bare hands.
【Have you compared items?】
- [M & H pines Stripe] PH7Halogen bulb Standard
[Others]
- It is ZOOMERExclusive Design, but if you can hardly use it for Motorcycle using Light of PH7.
- Because it is soon to use, I do not know the durability.
View detail
Purchase for Front Disc
It does not start with this.
However, since it is made on the basis of Aluminum for OEM's DIO, when using a Wheel outside the company, some adjustment is required with Washer etc..
Maybe the price is a bit cheaper. Or maybe you want to Lineup such as Color Anodized Aluminum finish with Aluminum Cut-out.
This Recommendation.
View detail