Reviews
Somewhat, it is sensible.
This item is second car for use on a car.
I like the texture of Cut-out.
I also use only red coloring, but I also like this point with a good color.
And what is more noticeable is that there is a slit.
Meter cable does not have to go to the side of the Tire, so it is extremely easy to work with incisions.
Once you install it you can not use other.
View detail
Compact
Because the vehicle has changed, again repurchase.
It is easy to solve the License Plate Light problem in making it a Fender Eliminator.
Basically I only ride during the daytime, but the one I'm in trouble is License Plate Light.
I attached a separate formula, but I am not good enough.
Eventually I came back to this License Plate Bolt Type.
Again the appearance is clear.
After all, a little more light itself is wanted to spread.
View detail
Mounting on XG250 TRICKER.
Go out to the night forest road etc etc etc. , Because it rides at night often, I installed it as an additional Stop lamp because it is unbearable at OEM's Small Tail lamp. I added the hole for Wiring with the same Size as the OEM Reflector and the same mounting hole diameter, and it was attached without feeling of back-end attachment.
Lights on the Stop lamp side can ensure sufficient visibility. Will not it function as a reflector?.
Lens margin etc., making is not so good, but the price is also cheap enough enough. We installed waterproof with clay in the hole where Wiring is going out.
I think that I want to Repeat if it gets broken again.
View detail
Cheap but as expected performance
Although it is dark and dangerous when it is OEMHalogen at night, it is also possible to use high Light for masters - - - I found this item when I was thinking.
Although ZOOMER is two lights, this product is Quantity : 1 Set of 2pcs. Because of Large change profit.
The product is Blue in appearance, but the light is pretty white and it is bright.
I tried to light it on the wall without the street at midnight, but actually the image is actually brighter than the image.
Since it thinks that it can be attached to a vehicle using Valve of the same type other than ZOOMER, I would like to try it by all means.
View detail
Clear around Tail.
Of course, as it is, as it is the provision between Blinkers and the regulations of such things, we will install Blinker separately and Recommendation for use as Dress-up parts.
Even if it is mounted as it is, it is bright as it is, you know which direction the Blinker is lit but please operate at your own risk.
Where I felt that I wanted to improve a little bit more, I wanted to make the difference between when the Stop-lamp was lit and when it was not lit up more clearly ... ...
View detail
Brightness is also reasonable
I installed it in the outside Lucas tail lamp. I was worried about the amount of light, but with normal Tail Bulb etc.. It is bright above that.
The difference between Position and Stop is clearly understood.
Durability will be used in the future, I think that this price is a good item.
View detail
Best Online Shopping, Very Very Fast Shipping. For My Zoomer First Step MOD. This a Quality Product, Easy Install and Look Good !!! Thanks Webike
Best Online Shopping, Very Very Fast Shipping. For My Zoomer First Step MOD. This a Quality Product, Easy Install and Look Good !!! Thanks Webike View detail
Best Online Shopping, Very Very Fast Shipping. For My Zoomer First Step MOD. This a Quality Product, Easy Install and Look Good !!! Thanks Webike
Best Online Shopping, Very Very Fast Shipping. For My Zoomer First Step MOD. This a Quality Product, Easy Install and Look Good !!! Thanks Webike View detail
Best Online Shopping, Very Very Fast Shipping. For My Zoomer First Step MOD. This a Quality Product, Easy Install and Look Good !!! Thanks Webike
Best Online Shopping, Very Very Fast Shipping. For My Zoomer First Step MOD. This a Quality Product, Easy Install and Look Good !!! Thanks Webike View detail
Making is complicated.
Buy with Blinker Bulb reserve!
But unfortunately the Blinker bulb arrived broken. Since it purchased as a spare by chance it is to exchange it!
However, again unfortunately the mouth Gold is attached with solder and it is not possible to enter it!
It was a commodity that I was addicted when I scraped it, but it was good because it also turned on, but the miscellaneous of making it was a product.
View detail
easy installation just 4 screws good product. but have to release front fender. also have the connector in the package. very easy to use.
easy installation just 4 screws good product. but have to release front fender. also have the connector in the package. very easy to use. View detail
Was it a bad thing?.
Just as it is cheap, the construction of details is not good.
The Mirror department was also a bit dirty from the beginning, and it did not become Beauty even if it was polished.
I do not say it until the Instruction Manual, but I wanted you to attach the Bill of Material.
I guess I bought it just looks and lost a little.
View detail
Maniac goods understood to those who understand?
Immovable 4CycleDio (AF56) I gave it to an acquaintance so repair, maintenance, custom for the child of the Large student to go to school, test drive.
However, in a state in which the Front suspension is hardly functioning due to aged deterioration. Since this type of suspension is not usable immediately even if it is maintained, disposable, exchange is commonplace.
Since something is unintelligent and there is no trade to replace with a cheap external goods suspension, it is inexpensive to have a good product in the NetOakion to divert the GDASH HD suspension with the same diameter and the same notch position as the slip stop I got it..
I understood the Large body that I can attach, but the problem was how to stop the Brake drum's rotation.
Originally I planned to make my own with Duralumin thick plate, but by chance I found this item by chance.
It is for Honda's Gold suspension, but since Caliper pitch is the same, I buy it saying that Large will be durable.
It is a place that is overloaded, and moreover, because it is an anti-rotation of Brake, the product that PRO makes with Stainless material is safe and I think that considering the time and expense taking time to make it is quite cost effective.
I attached it to OH suspended suspension and attached it without problems.
After all the hydraulic Damper's effective HD suspension is good. It is stable and comfortable ride is good and Corner ring is good. But the first thing is that full Breaking can be done with confidence.
If this is the case later you can upgrade to Disc brake version, I think that it is a good product that hands reach itchy place.
View detail
Recommendation to Number Inn!
I wanted to refresh around Tail, so I converted it to Number in.
At that time I was wondering what to do with License Plate Light, but I made it to this item that is cheap and hassle free.
The making of details is slightly B-class atmosphere but it is not so noticeable, and I am satisfied with Large because I am not too nervous to that extent.
View detail
Rin Parts Rin Parts Oval Bar End Mirror
St FireSpec. I was ha ha ha ha ha! If I saw a box I could not open the box with a bad feeling to write for ZOOMER where there was no explanation anywhere, cute little Small Mirror entered.
I tried to temporarily fix it to the curved Renthal's TaperUp Handle, but there was no indication for the convenience of the hole.
I bought it as a cinnamon in the hand, but only the arm.
I think that it will be quickly replaced by a nice Combination Nifrek if even Mirror is taken off.
View detail
Rin Parts Rin Parts Square Type LED Reflector
I was looking for Tale lamp for expansion of Motorcycle variously with Net, Motorcycle parts Shop, etc., but after all I decided to purchase and install this RinParts Rin PartsSquare Type LED Reflector which I sold at Webike after all.
Motorcycle In front of it, Daylight and Blinker are lit up as Position Lamps, which is a reasonable self Appeal power, but behind Motorcycle, the tail Stop lamp is Position lamp and the Appeal force behind is too weak is.
This RinParts Rin PartsSquare Type LED Reflector Material : Quantity on Aluminum Base : Pair (for Left and Right) Quantity : 2pc. Set installed, I decided to install its Base on Rear Carrier of Motorcycle and increase the Appeal power to the rear.
In order to suppress solder peeling of the foundation by any chance due to vibration and overheating, rectify Diode (1000V1A) 1 pc. (Separately purchased 1 pc. 15) I put it in Wiring, but the top of the photo shows the Stop lamp lit - The bottom of the photo shows the Tale lamp lit. Especially no problem has been raised in the decrease of the light quantity and Appeal force behind.
Such a Lamp which had been installed before was supposed to be attached with the dimension to be refrained, but it was broken by a bump at the convex part of the fallen road surface and it was disconnected.
In anticipation of this, this time it is more Quantity than the previous Base width : Pair (for Left and Right) I made the dimension of 25 mm shorter, so that I did not destroy it the same way even if I overturned.
This RinParts Rin PartsSquare Type LED Reflector is a very inexpensive product, but since it is one time to replace it if it breaks it is not broken and there is nothing better to break.
This RinParts Rin PartsSquare Type LED Reflector is cheap so I am Quantity : 2pc. Set is used.
Moreover, because it seems there is no durability low because it is inexpensive, I use this RinParts Rin PartsSquare Type LED Reflector with confidence.
Installation of this RinParts Rin PartsSquare Type LED Reflector to the base part is also not difficult, it is not difficult, and although there are 3 wires, it can easily connect to a for BrakeWiring of the Motorcycle Body with the plug terminal etc. It is easy to install I think that it will belong to the category.
I attached this RinParts Rin PartsSquare Type LED Reflector and confirmed the lighting many times at night, but the Tale lamp looked like it looks like an OEM Product in the dark.
.
View detail
RinPartsMicro LED Blinker
I tried to buy this Rin Parts Rin Parts Micro LED Blinker Ver1 intrigued by the appearance cuteness, but the light emits a strong light rather than cute but dazzling.
Daylight - I think that it can be used for Position and Blinker, but it may be better to lower the amount of light a little.
Especially, always lighting Daylight - When using to Position, Body's Material : Since Aluminum Body is heated and it becomes hot, Recommendation for installation on a windy place where it is easy to dissipate heat.
Of course, I think that it is a good decision to lower the light intensity and limit heat generation.
The whole body of this Rin Parts Rin Parts Micro LED Blinker Ver1 is made of Material : Although it is made of Aluminum, since the LED element is designed to dissipate heat as it is weak to heat, it is a product that can be expected for durability if it does not get as hot as possible.
As a result of doing several lighting tests to wiring this Rin Parts Rin Parts Micro LED Blinker Ver 1, I saw the rectification diode on the Minus side as 1 pc. , Plus side branched into two lines and Daylight - I thought that it is just good to limit the light intensity and heat generation by connecting two rectifier diodes in series to Wiring for use in Position.
The same effect can be expected by using constant current Diode or resistance, but from the aspect of Cost surface and simplicity durability and suppression of heat generation, using three inexpensive rectification diodes I think that it is Simple to limit the current.
In addition, I saw the White lighting product of exactly the same appearance as this Rin Parts Rin Parts Micro LED Blinker Ver 1 at 475 yen at other site.
I do not know the reason for its cheapness, but there must be some reason for sure.
I will recommend to be used after being devised to suppress the heating value of Body itself which is interested in this Rin Parts Rin Parts Micro LED Blinker Ver1 including saying.
This Rin Parts Lynn Parts Micro LED Blinker Ver 1 is not sure where to make a maid in.
It is making, designing and price not like JAPAN.
Once installed in the Motorcycle, it is not easy to burn the LED, right?.
I think that it is necessary in advance.
Rectifier Diode is 1 pc in electronic parts PartsCenter etc.. I sell for 15 yen. (I use 1000V1AX 3 pieces)
.
View detail
I love them, because not just a mirror, they fuctioning as the bar end stabilizer too, reduce the vibration on my handlebar. The mirror is looks very nice, reasonable prize but good build quality. It's fit the low handlebar on my bike, and make the cockpi
I love them, because not just a mirror, they fuctioning as the bar end stabilizer too, reduce the vibration on my handlebar. The mirror is looks very nice, reasonable prize but good build quality. It's fit the low handlebar on my bike, and make the cockpit looks simple without ordinary mirror. View detail
RinParts Rin Parts Micro LED Blinker
【What made you decide the purchase?】
This RinParts MicroLED Blinker is an unusual Type LED Blinker among various commercially available Blinkers.
It's pretty cute, so I bought it.
【How was it actually used?】
While considering how to install it, it is occasionally lighting and playing, but this RinParts Rin Parts Micro LED Blinker is quite bright LED.
【Mounting was difficult?】
In order to install it, it will be to open a hole of Φ 10 mm or to use the existing Φ 10 mm hole, but I'm thinking where to put it.
We have not installed yet, but due to the structure the installation will be large and it will not be difficult.
【Please tell me the installation point and hang】
Since this RinParts Rin Parts Micro LED Blinker seems to be highly waterproof, it seems to be Large sturdy even if you install it without worrying even where it will hit the rain.
When installing, I think that installing in a good position of the wind street which is easy to dissipate heat and applying Loosen Tightening Lock tite to the Nut for fixing is Large Off Point.
[Is there anything I was disappointed about?]
As I knew, this RinParts Rin Parts Micro LED Blinker has only two wires, so I can only use either Blinker or Position lamp.
Although it is possible to make a circuit so that Blinker and Position lamp can be used together, Diode is required separately.
【Hope for Manufacturer - Please let me know if you have any improvement points]
Since it is a point, since it is now, Wiring is still appreciated, it is possible to have Tale lamp, Stop lamp and Wiring of Minus line as three lines from the beginning.
【Have you compared items?】
I compared it with various Blinkers observed by Net and Shop.
This RinParts Lynn Parts Micro LED Blinker gives orthodox and elegant light.
[Others]
Still for a while, I do not have the courage and opportunity to install this RinParts Rin Parts Micro LED Blinker in the Motorcycle, but let me report it again with Impression.
.
View detail
★ It's pretty that you make it round and Small
【What made you decide the purchase?】
Round at love at first sight Blinker pretty Small (Lol)
There was no necessity, but I bought it because it was cute.
【How was it actually used?】
Small is pretty and pretty, it is a blinker that you can use firmly with a lot of light intensity.
I tried energizing test, but it is dazzling light when energizing 12V.
【Mounting was difficult?】
This RinParts MicroLED Blinker Ver 1 Body is a product that can be installed easily by inserting it if there is a hole of Φ 10 mm and tightening with Reverse side from Nut.
The power source draws a line from BlinkerWiring of Motorcycle and Quantity : Pair (for Left and Right) It is easy because it just connects so as not to make a mistake.
【Please tell me the installation point and hang】
Body of this RinParts MicroLED Blinker Ver1 is made of Material : Since it is Aluminum, if you attach it to the Aluminum part of Motorcycle or attach it to a place with good wind, you can use it with the intended cooling capacity of the product.
If you apply Screw Loosening Prevention Agent to Gold Made Nut that stops at Reverse side, it will be hard to loosen so it is safe.
In addition, we sell that genus Nut in DIY Heat resistant Material : If you replace it with PlasticNut, even if there is no Screw loosening prevention agent, its heat resistant Material : As you tighten PlasticNut it will be fixed while being distorted by stress Material : PlasticNut becomes very difficult to loosen.
[Is there anything I was disappointed about?]
Although I did not understand it by appearance, the exterior was for Material : It was heavily unexpected because it is Aluminum.
【Hope for Manufacturer - Please let me know if you have any improvement points]
The appearance shape remains the same, I think that it can be used as an auxiliary light for Daylight and Stop-lamp if there are products with different luminescent colors.
【Have you compared items?】
Compared to various Blinkers of other companies, but there is not any other CustomizationBlinker finished compactly more cute than this RinParts MicroLED Blinker Ver1.
This RinParts MicroLED Blinker Ver1 is a very simple, rounded and lovely Blinker, and as a LED Blinker it is a very cheap Blinker as well as more than other companies' products in terms of price.
.
View detail