Reviews
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB70, HONDA SUPER CUB70, HONDA SUPER CUB70, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA CUB PRESS, HONDA CUB PRESS
Purchased with Mesh Inner Rack
Large I thought that they would be attached separately but I did not attach it outside so I processed a little rack.
Then we managed to install it so there is no problem.
Also, I added a spare Tank and made it before Seat, but it was a good position for height so there is no problem.
View detail
Fits: HONDA SUPER CUB70, HONDA SUPER CUB 50, HONDA SUPER CUB 90, HONDA CUB PRESS, HONDA LITTLE CUB
C50 (Yellow registration) Attached to
What is the difference between OEM's Boy-Young Bousung Sass and Cloudy Mud. I wondered what it was astray with this amount of money. It is not hard and is not soft enough performance. Even if you cross Gap over 60 km "change" It is nothing.. I can not judge the durability yet. View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB70, HONDA SUPER CUB70, HONDA SUPER CUB70, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA CUB PRESS, HONDA CUB PRESS
I am surprisingly firm.
Custom not too customized for CUB. I thought it would be Betokari. It is easy to install and it is not a good place to work especially because it is nice and good. When loading luggage actually it will be necessary in the atmosphere, but you will need codes etc.. View detail
The ride feeling improved.
- When exchanging from NORMAL, the Right Side Bottom part was slightly impatient because the OEMExhaust System did not get out of the way. I was able to replace by loosening the 19 mm Bolt securing the Exhaust System and shifting the Exhaust System slightly, but was the other person also so? Other than that it was very easy to replace.
- For the time being, I tried running with the weakest hardness, but there was a feeling that it became somewhat waist height. The feet appeared a bit worse but the problem level Level. I will get used to it.
- The ride feeling became clearly better. Although it can not go to supple, it will be saved because it seems that the uneasy steps and the push-up at the joint of the bridge become gentle and the burden on the waist is likely to decrease.
- From now on, I would like to find the hardness of their liking and try to experiment. Also, in my case, there is no interference to the Leain SideBottom's Chain case that you frequently pointed out, and Washer was unnecessary.
View detail
Fits: HONDA Super Cub 70, HONDA Super Cub 50, HONDA Super Cub 90, HONDA little cub, HONDA little cub
Easy installation!
LITTLE CUBFI's OEMHead lamp light color was yellow and it was dark, so I installed Multi Reflector Lamp. Install Screw Quantity : It was only to remove 2 pc so it worked very quickly and quickly.
As soon as I confirmed it, I felt that the light intensity was clearly up. It was good because the price was affordable and you could purchase cheaply using Point discounts. Clear Lens looks beautiful as well.
Just installed firmly, because there is a little rattling of Lens - ☆ is.
It seems that it feels just right if you set the Headlight visor.
View detail
Fits: HONDA CROSSCUB [Crosscub]., HONDA CROSSCUB [Crosscub].
Instruction Manual lacking explanation
I thought that I could clearly put it on, but this product did not enter unless I shifted the position of footpeg.
The work itself is not a big one, but the Instruction Manual of the Tokyo temple is somewhat lacking explanation.
View detail
Fits: HONDA Super Cub 50 Custom, HONDA Super Cub 50 Custom, HONDA Super Cub 70, HONDA Super Cub 70, HONDA Super Cub 90, HONDA Super Cub 90
53 Sheet for Carrier
【What made you decide the purchase?】
I think that it depends on the size of the CUB Normal seat but also depending on the physique, but since there is not much flexibility, 53 Seat can afford ahead and back.
When I set it to 53 Seat, I purchased this because I can not install Normal carrier.
【How was it actually used?】
Making is also firmer than I thought. Because it is Stainless, it is good to be strong to Rust.
【Was it difficult to install? (Hard parts case)】
Although it is installation, Carrier has Type of square eyes and round eyes with CUB and it was a round eye as Image image, so I made a mistake. Since this is my own error, it is useless, so we installed a round bar and WasherBracket by welding and bending to install it.
【Please tell me the point of installation and hang (in the case of Hard parts)】
Installation can be easily installed without problems without fail if ordering. I think that there is no problem because there is not so much distortion and making is solid as well.
[Is there anything I was disappointed about?]
It was more than I expected because it was made more firmly than I thought.
【Hope for Manufacturer - Please let me know if you have any improvement points]
CUB is too long as Double seat and I think that 53 Seat is exactly the size.
So I think 53 Seat's various designs come out in various ways.
I am expecting from Mr. Tokyo..
【Have you compared items?】
I think there is nothing to compare.
[Others]
I am sorry to have different image images this time, but I think that it will become the image of itself if possible because I think that there will be no differences like myself, so I would like to ask Webike there. I wanted to be careful because it was bad that I did not read the explanation firmly and I did not know that CUB's carrier also had a type.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB70, HONDA SUPER CUB70, HONDA SUPER CUB70, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA CUB PRESS, HONDA CUB PRESS
Quality is reasonable
I arrived earlier than I expected.
I will break the packaging to install it immediately.
Right The front Bracket was turning inward.
Okay so okay w
Straight down with Pliers.
Screw hole BALI, steel material cutout part BALI and so on hand w
I cut off the dangerous part, but at the same time I have to cut Plating and so I will paint rust once..
I attach it to my car LITTLE CUB
Body was also distorted overall.
After attaching One Side, we will bring it back to force.
Installation is easy because it only stops Bolt in 4 places.
It's quite powerful with Spring like Nasumi Take. Tha Brett I thought I was going to sandwich it, but it is likely to be destroyed and I am considering what to pinch.
It was OK at all because I attached it with an emphasis on appearance.
I have not decided what I can post, but it is cheap and plating is more satisfying.
View detail
Even other models were OK
Last year, after dislocating Right ankle, I will not step on Brake pedal well and sometimes to step out. I was worried about switching to Scooter and found this product. It was for SUPER CUB, but it was similar in shape to the Pedal in ST 250 and the price was cheap so I bought it for a chopstick.
As a result, although I was quite involved in the positioning of the mounting, I did not need to process it, I could fit the Bolt tightly and there was no wobble at all.
As the Pedal became Large around 1, it is a surface that is hard to slip, so you can now drive with your feet comfortably.
The point to be noted is that it can be used to a certain extent in Motorcycle which is not compatible model, but positioning is quite difficult and the material is so soft that we were careful about overtightening.
If you can, it would be easier to install and Steel to upgrade security.
View detail
Fits: HONDA Super Cub 50 Custom, HONDA Super Cub 70, HONDA Super Cub 70, HONDA Super Cub 90, HONDA Super Cub 90, HONDA little cub, HONDA Super Cub 50 Custom, HONDA little cub, HONDA Super Cub 50 Custom
Gniguni feeling disappeared
OEM's Rubber gniguni everything and it did not fit my way of riding.
So, find this item and buy it without thinking.
For installation, pull the OEM's Rubber and remove it "Middle Bar" Just plug in and tighten Bolt.
At this time, the attached Bolt was Bolt tightened with Phillips Screwdriver and changed to Cap bolt because it was impossible to tighten unless the vehicle was knocked down.
As a result, footpeg's Grip feeling has overwhelmingly gained, so I am satisfied as a product.
However, the attached Bolt is not a Plus screw...
View detail
Rain's Brake is safe
Normal brake pedal is slippery and it is dangerous when it is rain, I bought this product.
Functionally, the difference in level on the surface is so high that it strikes the sole of the shoe and no slip.
The quality of the product is somewhat lower, it is so thin that it will be broken when tightening the mounting Bolt.
I do not feel Firmly but I think it is more secure than the OEM state.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB70, HONDA SUPER CUB70, HONDA SUPER CUB70, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA CUB PRESS, HONDA CUB PRESS
purchased since it increased although appearance was smart and the load was also little -- there is almost no description and unkind.Since attachment was found when seeing the photograph of the goods List, it put between the Washer and Plate of
purchased since it increased although appearance was smart and the load was also little -- there is almost no description and unkind.Since attachment was found when seeing the photograph of the goods List, it put between the Washer and Plate of a Bolt which are fixing the Leg shield, and attached.For exclusive elegance, even if shakiness does not have attachment and it straddles by a Bolt on, it does not become obstructive.however,
restricted to a Leg-shield wearing vehicle -- when the Gasoline carrying can was stacked instantly, it became comfortable good touch.Although a binder function occurs in the center of a Carrier, a load can be inserted, and there are few loads which whether there is any opportunity to use not much can
--(=omega=;)
Stack, it becomes a picture even if it is stacking nothing, since the Design of a Carrier is good.When dissatisfaction removes a Leg shield, it becomes time and effort. -- Aren't they things?
View detail
When hot, it becomes touch that a Pants sticks to the hips, but it will be reduced if this Cover is attached. It is not necessary to carry out operation which raises the hips by the waiting for signal, and pulls a Pants. If it will get hot from
When hot, it becomes touch that a Pants sticks to the hips, but it will be reduced if this Cover is attached.
It is not necessary to carry out operation which raises the hips by the waiting for
signal, and pulls a Pants.
If it will get hot from now on, it is hoped that it may be more realizable.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB70, HONDA SUPER CUB70, HONDA SUPER CUB70, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA CUB PRESS, HONDA CUB PRESS
A price is cheap and quality is also the passing mark. The first reason for having chosen this is that it did not want to soil the Lec Shield with shoes.
A price is cheap and quality is also the passing mark.
The first reason for having chosen this is that it did not want to soil the Lec Shield with shoes.
View detail
It became a Fashion although it was a small Customization. It is the Cover Type, and since it became somewhat large, it steps on, and it Is crowded and I feel that it becomes easy to carry out. Since it is unusually long, as for regre
It became a Fashion although it was a small Customization.
It is the
Cover Type, and since it became somewhat large, it steps on, and it
Is crowded and I feel that it becomes easy to carry out.
Since it is unusually long, as for regrettable one, a fixed Bolt will be projected by the Bolt under
after installation.
The direction to worry recommends you exchange.
View detail
Fits: HONDA Super Cub 110, HONDA Super Cub 110, HONDA Super Cub 110 Pro, HONDA Super Cub 110 Pro
Although it is a small Customization, I think that attachment can be done simply and it is dressed up. In spite of the die length of an attached Bolt being unusually long and fixing it however, it is in the state which projected in low
Although it is a small Customization, I think that attachment can be done simply and it is dressed up.
In spite of the die length of an attached Bolt being unusually long and fixing it however, it is in the state which projected in
lower part, and it is somewhat regrettable although it becomes a place which is not visible.
Although it points out with it and is lump fixation, not a Cap type but since it is cylindrical, it is also regrettable that a black iron bar appears from the
SIDE.
Considering the
price, I think that it is enough.
View detail
Fits: HONDA Super Cub 70, HONDA Super Cub 50, HONDA Super Cub 90, HONDA little cub, HONDA little cub
Although the inner Valve is also exchanged, the Valve of a Blue is open and it is dramatically satisfied. Since irradiation range spread horizontally and brightness also increased, he could feel easy about operation of night.
Although the inner Valve is also exchanged, the Valve of a Blue is open and it is dramatically satisfied.
Since
irradiation range spread horizontally and brightness also increased, he could feel easy about operation of night.
View detail
Fits: HONDA SUPER CUB110, HONDA Super Cub 110
[Webike Monitor] He was surprised at this low price by 2 Set. Although it is used by Setting of the maximum weakness by serious consideration with guide peg, sense of stability sufficient also by Swerving is demonstrated.
[Webike Monitor] He was surprised at this low price by
2 Set.
Although it is used by Setting of the maximum weakness by serious consideration with
guide peg, sense of stability sufficient also by
Swerving is demonstrated.
View detail
It was good to attach easily. The Design is also satisfactory.
It was good to attach easily.
The
Design is also satisfactory.
View detail
Fits: HONDA Super Cub 110, HONDA Super Cub 110, HONDA Super Cub 110 Pro, HONDA Super Cub 110 Pro
Since it was torn and the pure Step had been taken, it purchased. By being different in it being pure, since it is metal, even if it rubs somewhat, although attached, it does not separate from a crack. It is very light. It fixes with two screw thr
Since it was torn and the pure Step had been taken, it purchased.
By being different in it being pure, since it is metal, even if it rubs somewhat, although attached, it does not separate from a crack.
It is very light.
It fixes with two screw threads.
This Screw loosens very well easily.
Although mind which is somewhat sweet also carries out elaboration, considering a price, probably, it is such a thing.
View detail