Reviews
Installed to raise the Hold of the Tank
I installed it to increase the hold of the tank and I am satisfied with its appearance. Double-sided tape is good to put on the point where it hits the tank when it is temporarily attached. View detail
I'm pretty happy with it
Installation is easy, though,
The tank cap hole is a bit large, so positioning is a bit difficult.
The texture is satisfactory.
View detail
Fits: KAWASAKI zrx1200daeg [daeg]., KAWASAKI zrx1200daeg [daeg].
Novel, Style
I think it looks good on ZrX1200 DAEG. The tapping screw is not included, but it is removable. The drilling work is a little bit strange.
The installation was a Large oddity, but the end result was satisfactory.
View detail
awesome more classic w800
I bought a w800 knee assistant pad and I'm very satisfied. I laugh when I see my bike which is more classic. It is a bolt-on product that can be easily mounted with the same quality as genuine, and it took about 10 minutes to install. I'm so satisfied. It took about 10 days to ship. I will buy it with another product if I get a chance later. View detail
Balance-wise, I think it's good.
First of all, Balance is not bad after installation.
By changing the angle of the meter, it is the gap increase Large and the scant feeling that depends on the thinness of the meter unit that I am concerned about.
I fill the gap with Lower cover etc. to solve this, but it is a certain company's manual processing product (OEM Product around ZEPHYR?). However, I gave up because it was too expensive to buy again.
In the first place, it is Image that a certain company made is the thing which imitates W3, but because the Meter attachment position of W800 is slightly low and backward, it was a little concerned with Image that the ear of Rabbit lay behind.
Once again, the coolness of the ZSeries Meter and Light unit is superb.
I installed it to try to pull in the Image around W1 with the Lower cover of Mr. Pleasure away from that line.
The positional relationship with the OEM Parts is not unreasonable and the balance is good.
It is recommended to replace Handlebar, Light unit, Meter Bracket, etc. in parallel.
It seems to be necessary to paint because it is FRP bare finish &Black Gel, then I think that the upper Rubber cover adhesive attachment was good in attachment, I feel that there is not much sense of incongruity even if I install it as it is, but if you are concerned about the surface whitening and deterioration of FRP, you should paint it lightly. I thought that it would be better.
If you want to match the texture with OEMMeter, you may have a hard time.
Because it is the goodness of the balance which fits naturally to W800, I think that it is good to be more like it, and there is an impression that it is a little W1 from a distance.
View detail
Very good product!
I want to look like a parenthesis! I would highly recommend this product to anyone who is looking for a new product, but I would not recommend buying this product for the purpose of putting things inside. This product is easy to install but you will need an electric Driver. View detail
Fits: KAWASAKI Varios II, KAWASAKI Zephyr 750, KAWASAKI Zephyr 550, KAWASAKI Zephyr 400Χ, KAWASAKI Zephyr 400, KAWASAKI ZRX-II 400 Varios, KAWASAKI ZR-7, KAWASAKI Varios II, KAWASAKI Zephyr 750, KAWASAKI Zephyr 550, KAWASAKI Zephyr 400Χ, KAWASAKI Zephyr 400, KAWASAKI ZRX-II 400 Varios, KAWASAKI ZR-7
Garbage equivalent
It is severely distorted and impossible to install
I doubt the nerve of the Manufacturer to ship such a product
I'm so disgusted that I don't even want to put in Objection
View detail
For the price, it's good
With Cut-Out and board Gold, this price would be hard to beat
Not for Dress-up, but for Safety and Rule
That's enough
My one complaint is that the thickness of the Nut
Can no longer insert the anti-looseness split pin
It's just that
View detail
best fitment ever
good looking . direct fit . no modification needed,the most important is made in japan,best quality on the market. we trust Japanese made product . View detail
Surprised by terrible quality
I was surprised at how cheap it is. I can not use such embarrassment... That is exactly what this is about losing money for buying goods. I bought Garbage. That's why it is scarce or blurred in photos View detail
It is solidly made
I bought it for Circuit Running.
Rear axle shaft is easy to install because it is just pinching it.
When using Racing Stand, it seems better to pay attention to the position.
View detail
Than Stone Grip...
I used it even in the previous car, I knew there was also for NINJA, ordered immediately and tried it.
Fit feeling is a bit inferior as other people say, but it looks a little away, so it looks good at all, so I can forgive it at all..
I think that the Gold amount is cheaper than buying Stone Grip and buying Tank Pad.
I think it's good.
View detail
It is a good product different from Tank Pad and Stone Grip
I was worried about what to do with Tank Pad with the change of train, but I knew that Pleasure made by the previous car was out and bought it.
I will make a gap, but I like it because there is no other texture.
It would have been better if the price went down a bit if you wanted it, but the number will not come out, is not it.
View detail
It looks better......
2017 ZX-14R H. Attached to G.
Although a Custom feeling may appear in appearance, it is subtle to say whether the product is for the price.
The installation precision is also bad, and also in the Instruction Manual "Attach to the place to be comfortable..... It is stated in the expression "bae pa LePera itself. There is Screw attached to attachment, but I do not want to open a hole, so it is not translated exactly with the car body so we installed Double-sided Tape with double sticking. Working time 2 minutes.
Cost may be high in small production but price may be a little cheaper.
View detail
Recommended?
I ran into the Normal tandem seat with a box for Motorcycle flight, but the Tandem seat of NINJA 2 Helmet 50 RR is sharp.
That's like Small Mountain!
A huge box gaps on Left to Right like Yayaro Broke! So, purchase this PleasurePorterGel!
Stability when putting a box, no complaints! For those who like to put on luggage on a regular basis, it is a recommended shape.
Although this product is Paint to OEM color, color tone is perfect! The firm feeling of construction is without complaint.
And the problem is that if you do not install it properly, the place where the Wound sticks to the car body ... ... ... It is better to shave and adjust!
Considering Price, it is not expensive but cheap and reasonable finish!
Speaking of a bit of derailment, Rear view after unloading boxes and luggage is a bit disgusting!
View detail
I'm glad I bought it.
I bought a Visor but I was not satisfied so much and I was looking for it, I found this and bought it. I was half confident, but I got really cool. However, the price was not satisfied for a moment. View detail
It does not repeat desorption.
It is for NINJA 2 Helmet 50SL, but it can also be installed on Z250SL.
However, in the case of Z "KAWASAKI" Since Logo is drawn on both sides of Tank, the last of Left Sidekawasaki "I" It hid, kawasak (Leather Sack) It will become. (Right barely "awasaki" It does not become. )
However, Z / NINJA It is common to note that the shapes are properly matched, so cover the gap and Tank / Repeatedly, Wank will definitely be added to Tank. Wound comes in handy.
I did not do it, but it may be avoidable if you slurp the inside or do something before installing and slippage.
After that, the other person is written, but those who lie down like riding over Tank will surely get in the way. If you pay attention only to that point, is it okay to install as long as you like it.
By the way, I have two objectives to replace Tank Pad and add Space for document entry.
It is written that Double - sided Tape is attached and used for installation, but I use it in the Dashboard such as a car from the purpose of putting in documents Pitat Seat? (Those who do not slide so that the thing they put on sticks) I cut it and used it.
View detail
Can also be used with ZX-14R
Since Base is made of FRP, it is easy to match the position.
The surface is somewhat soft, so it's a touch of preference.
In the attached Magic tape, because the gap opens, I fixed it firmly with a thick Double-sided Tape, but after all it opened.
In order to cover up to SIDE of Tank, I can avoid scratching with G bread etc and I will not go to Stomp Grip, but it is easy to hold as a nonslip.
If there was a little more height, it would have been better if Cover to near the fuel filler a little more ....
View detail
Purchase an OEM color copy.
Because the vehicle is GoldenBlaze de Green Light,
This time, I bought an OEM color copy.
I am not confident of painting by myself,
Since this Lame is contained in this Color, first it will not be possible,
I did not want to install it with Unpainting, so I chose this OEM color copy.
OEM coloration. Because it was, it was uneasy how much color is different when installed,
Together, there is no sense of incongruity. Like the OEM Product, it's perfect.
At the time of installation, the temperature was low, so the shape was distorted? There was a gap?
As wrote in the Instruction Manual, I warmed up with Dryer and installed it with a feeling of adjusting payment.
Screw stopper and it is in item description, but I have not stopped Screw (Lol)
Even with Double - sided Tape alone, I think that it is stopped,
That is the self-responsibility..
(I have not stopped Screw on the other person's neighbors, too)
The face of the vehicle has changed
View detail
Complete Dress-up parts
Tank's feeling of falling down disappears, although it is satisfactory in terms of style, it does not mean that Knee grip is easy to do. However, because it can not lie hidden by that amount, it was not suitable for running Circuit. View detail