Reviews
A little high-end light bulb
Used for LITTLE CUB.
In fact, the same shape MH Pine Stripe" I bought it at the same time as the Valve made by The Matsu Stripe Valve was purchased at Webike for less than $500. This product is almost twice as expensive as Matsu Stripe's at the regular price. The actual price is around 700 yen. I was curious to see how this 200 yen difference would affect the performance, so I bought two types for spares.
This Hyper Bulb is as bright as Halogen! This Hyper Bulb was included in the Package because of the CatchCopy that says "Brightness as bright as Halogen!
I expected it to be brighter than FuTwo's Pine Stripe.
The results of the comparison experiment are ・・・・ close!
Comparing the brightness of the projected area on the wall in a dark room, it might be brighter than that of a normal white light bulb, if you ask me. It was an impression that the light was brighter than that of a normal white light bulb.
Either way, it is inexpensive, so it is a good idea to go with Stanley (this product) in the hopes of getting One Upgrading!
The higher-end product is Halogen, but it costs around 1,500 yen, so I feel that this one, which is half the price of Halogen, is sufficient.
The Stanley was made in Thailand, and the cheaper MH Matsu Stripe was made in Japan.
View detail
The 6v bulb, which is now rare and precious.
The 6V ball, which is now rare and precious, used to be available at Home center, but now it is not sold at all. 。 We keep several types under Seat in case the ball runs out while you are on the road. It is recommended to have a spare. View detail
CRF250 to full LED
CRF250RALLY50 was not LED only Tail bulb, so I bought it to change to full LED.
There are similar valves available from various manufacturers, but we decided to go with Stanley, a long-established manufacturer of light bulbs, because we wanted to get a good one.
Valve itself is very carefully made and very different from the inexpensive Valve.
The replacement itself can only be done by removing the Seat and then the Tail cowl, but it is not that difficult.
The light intensity after the replacement is also brighter, making it a very satisfactory product.
View detail
Standard will be this next time.
Double Bulb is used for Tail lamps, and I'd rather use a reliable brand with Stanley's name on it, rather than looking for a cheap one.
It seems like this is the only place to go for LEDs in Valve in the future.
The light distribution is not the same as that of a light bulb, but it is well thought out, and I did not notice any discomfort in the point light state.
We have not experienced any problems with the use of the License Plate Light as well.
View detail
In fact, if it were an LED Bulb, I think it should be treated as Standard.
Single Bulb, which is likely to be used mostly in Blinker, I'll go for the one with the Stanley name, a reliable brand, instead of looking for a cheap one.
It seems like this is the only place to go for LEDs in Valve in the future.
The light distribution is not the same as that of a light bulb, but it is well thought out, and I did not notice any discomfort in the point light state.
View detail
It's nice.
I replaced it with LEDs because I thought that LEDs consume less power and are more battery-friendly. The brightness is moderate, and the engine speed does not change even if the stop-lamp is turned on during idling, so it seems that the burden on the battery has been reduced. View detail
Fits: HONDA Dio 110, HONDA XLR BAJA, HONDA VFR400K, HONDA VFR400R-Z, KAWASAKI D-TRACKER125, KAWASAKI EPSILON 250, KAWASAKI KLX450R, YAMAHA XC50, YAMAHA XC50H, YAMAHA XC50R, YAMAHA BX50, YAMAHA BX50N, YAMAHA BX5S, YAMAHA YW50F, YAMAHA XF50L, YAMAHA BX50, YAMAHA BX50, YAMAHA BX50, YAMAHA BX50N, YAMAHA BX50N NEWS GEAR
High vibration resistance
[How is it used?
Replaced by out of valve.
How was your experience with it?
LEDs would be better, but it's not the place to put your money where your mouth is.
How did it compare to other products?
The quality will be the same as the sphere.
[Points to note]
Motorcycle's Rose Si changes Large
View detail
Use at your own risk for Motorcycle
[How is it used?
TZr250R (3XV) The product was used for the Headlight of the
It is for Vehicle, so it is at my own risk, but I bought it and replaced it because I liked the price and the warm color.
Was the one you received as per Image?
Packaged in inexpensive but solid Package.
Was the installation difficult?
In the case of TZr250R, it can be replaced without any special tools.
It can be replaced in about 5-10 minutes, as it does not require removal and installation of the Cowletc.
How was your experience with it?
It is for use on 4-wheeled vehicles, so if used on a Motorcycle, it is at your own risk.
As I recall, the difference is that they are not very vibration-proof, so their lifespan is a bit shorter or something.
The color of the Lamp itself was exactly as I had imagined.
As for the brightness, I personally feel it is not that bright. Well, I think it is sufficient for the price.
【Review】
The color was as I had imagined, but as for the light intensity, it is there.
Well, it is visible enough even when driving at night, so I think it is doing a good job for the price.
Quantity at this price:2pc. Since it contains a Set, I think it is cosmetic even if its life is a little short.
View detail
Light is now slightly whiter, despite the bulb.
[How is it used?
I had the impression that the light from the NORMAL bulb in the CUB was too dim and unsatisfactory, and wondered if this product would increase the brightness somewhat. I installed this product thinking that it might increase the brightness a little. This product can be used with many types of mopeds if the compatibility is good.
[Was it as per Image?
I think that the blurb for this product on the surface is wordy, even though the Page is simple. Incidentally, this is Halogen." It is not a Lamp, so keep that in mind before considering it.
Was the installation difficult?
The Valve can be easily replaced with a minimum of tools. However, when installing the Valve, avoid direct contact with the glass part of the Valve, or the life of the Valve may be shortened if grease from your fingers gets on the glass part and the Valve is used.
How was your experience with it?
Light becomes slightly whitish and brightness "Feeling" The brightness and visibility of the light has increased, but the actual brightness and visibility cannot be said for certain. It is not easy to say about the actual brightness and visibility of the light. When the light is off, the blue color of the Valve is reflected in the reflector and it looks beautiful.
[Included Parts:were they on?
There is no Instruction Manual, but the replacement process is easy, so it is not a problem.
[Was there anything that disappointed you?
There was a slight difference between the actual brightness and the brightness imagined by the package.
View detail
Brightness with crispness
Used for KIJIMA's Lucas tail lamp.
When Brake is applied, it is firm and bright, which is very nice.
I am glad I bought it at a reasonable price.
View detail
Since a position lamp is in the same housing as a headlight and became a high fever extremely, the white wedge was looked for not by LED but by the incandescent lamp. It was able to unite with the color of the headlight instead of the color which is y
Since a position lamp is in the same housing as a headlight and became a high fever extremely, the white wedge was looked for not by LED but by the incandescent lamp.
It was able to unite with the color of the headlight instead of the color which is yellowish unlike an original manufacturer's product well.
View detail
I am satisfied with the brightness.
I don't know how durable it is yet, but I replaced it because the Valve of the Room lamp of NORMAL ran out of bulbs. It is clearly brighter than the NORMAL one. The price is reasonable and I am satisfied with the two pieces. View detail
Fits: KAWASAKI ELIMINATOR 125 , KAWASAKI BALIUS, KAWASAKI BALIUS, KAWASAKI 250TR, KAWASAKI 250TR, KAWASAKI 250TR, HONDA FTR223 Tricolor, HONDA FTR223 DELUXE, HONDA FTR223 Standard, KAWASAKI ESTRELLA, KAWASAKI KSR110, KAWASAKI KSR110, KAWASAKI W650 (Handlebar Up TypeSpec.), KAWASAKI W400, KAWASAKI KSR110, KAWASAKI SUPER SHERPA, KAWASAKI SUPER SHERPA, KAWASAKI VULCAN 900 CLASSIC , KAWASAKI VULCAN 900 CLASSIC , KAWASAKI VULCAN 900 Custom
As a walking stick to keep you from falling
I've started riding Motorcycles with more thought to prepare myself to protect myself than I used to
When the Stop lamp goes out on the road, especially at night, it is highly likely to lead to an immediate accident I found out when I came across an accident at a Touring destination
The person who was in the accident also noticed that the Lamp was out, but there is no replacement and Large will be strong It seems that it was a rear-end collision just as he was getting ready to say "I'm sorry, I don't know what happened
At worst Blinker is a hand signal and Head lamp is a high beam (Large is usually a low beam.) It is possible to substitute by adjustment, but because Stop lamp cannot be substituted, it is necessary to carry it as a minimum spare I did
It is packed in a small plastic container, which is sold at 100-yen or fishing tackle You can also store the Headlamp if you have been using it for quite a long time
We see quite a few elderly people driving cars these days, and the aforementioned accident was also the one that hit them By Elderly Mark 'I had no idea what Motorcycle's Brake was He talked about it
I don't want the Lamp to run out, it's easy to replace it if you have it, so think of it as a wand that you can't fall back on Prepared
(LED is also good, but there are also LEDs that suddenly stop turning on, so I dare to use Regular The ball is safe.)
View detail
Fits: HONDA SUPER CUB 50 Custom, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 Street Specification, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB Custom, HONDA PRESS CUB 50 DELUXE, HONDA PRESS CUB 50, KAWASAKI 250TR, KAWASAKI 250TR, KAWASAKI 250TR, KAWASAKI SUPERSHERPA , KAWASAKI ELIMINATOR 250 , KAWASAKI ELIMINATOR 250 , KAWASAKI SUPERSHERPA
Everything is normal!
I bought it because the Speedometer's Lamp has expired.
It is a basic product that it is a light bulb that has absolutely no harm but it is troublesome if it does not exist.
And the basic performance is fine, there is no complaint.
I can not come to like the LED Lamp by all means, so I want you to continue to produce it in the future.
View detail
Fits: HONDA PRESS CUB 50 DELUXE, HONDA PRESS CUB 50, YAMAHA VOX DELUXE Model:JBH-SA31J, YAMAHA VOX
In various places
Since Blinker of CUB90DX has expired, for Replacement,
Purchased for Rear taillights of Step WGN used for Transporter.
The price is also cheap, the inventory also has Webike so you can deliver it even if you do not go shopping.
It is a feeling that the hand reached to Kayui place.
View detail
It exchanged for the Valve here from the yellow Headlight valve attached when he bought it with medieval times. Since the front Headlight was not clear, the comparison of a color cannot be performed, but I feel during a run that it became brighter than f
It exchanged for the Valve here from the yellow Headlight valve attached when he bought it with medieval times. Since the front Headlight was not clear, the comparison of a color cannot be performed, but I feel during a run that it became brighter than forward. View detail
Since number light of the car was a yellow taste color, I exchanged. Recently, there are many who choose LED, but light is lacking, or there were many vehicles which diffusion of light is partial and the line of white LED has come, so I did not choose LED
Since number light of the car was a yellow taste color, I exchanged. Recently, there are many who choose LED, but light is lacking, or there were many vehicles which diffusion of light is partial and the line of white LED has come, so I did not choose LED as it became more natural to choose an ordinary bulb. I think that it is suitable for the number light of a car since here is no problem as long as you do not look into the number light. View detail
The goods here will be discovered if you think that a color stops suiting a position ball and he will exchange if a [Webike-monitor] headlight is exchanged from a pure thing. It purchased with no problem. The color also became good exactly and it
The goods here will be discovered if you think that a color stops suiting a position ball and he will exchange if a [Webike-monitor] headlight is exchanged from a pure thing.
It purchased with no problem.
The color also became good exactly and it has said it to mind.
Since it is easily exchangeable, how are you also?
View detail
It chooses to compensate for change of the bulb of a headlight. Although I think that there are many people who change a positive ball into LED, beautiful luminescence unique to a bulb has a special thing. Please wear working gloves etc., when val
It chooses to compensate for change of the bulb of a headlight.
Although I think that there are many people who change a positive ball into LED, beautiful luminescence unique to a bulb has a special thing.
Please wear working gloves etc., when valve classes are exchanged, and do not cause the fall or burst of a life by leather fat adhesion on a bulb.
View detail