Reviews
Fits: SUZUKI GSX750, SUZUKI GSX750 , SUZUKI GSX750 , SUZUKI GSX1000S, SUZUKI GSX1100S, SUZUKI GSX1000S, SUZUKI GSX1100S
KATANA SPEEDO NEEDLES
I recieved the Katana speedo needles quicker than expected and it arrived in a well protected package. Once I get some free time I will install them. I was so impressed with the service that I did not hesitate to order another product. Thanks! JOHNNY "B" KATANA View detail
That's what I'm talking about, Mr. OnoSpeed.
The left hand, which was giving me tendonitis, has also been greatly reduced. The installation was a snap, but you have to make sure you adjust the clutch properly, remove the power assist, and adjust the LongRelease properly. If everything was Yellow Pine, it would be the most blissful experience.
The look is great, and the consistency with the Brembo master is perfect.
View detail
Fits: SUZUKI GSX750S1, SUZUKI GSX750S2, SUZUKI GSX1000S, SUZUKI GSX1100SZ-SR
Diversion to Type 3 KATANA
It was diverted to Type 3 KATANA.
The Smartphone Holder can now be Mounted with the InchBall installed.
Separate Handlebars are very helpful because there is no room to install Clamps.
View detail
Fits: SUZUKI GSX1100SY
It was diverted to Type 3 KATANA.
Since there is no OEM/external cable for the 3-type KATANA, this product for Final with the same shape at both ends of the cable was diverted.
The Cable length is slightly shorter, but so far it has been working fine and has been very helpful.
Since the internal wire can be pulled out from the Cable end on the Wheel side, it must be properly greased up before installation.
View detail
Storage Space Get
My own KATANA is a limited edition red, so I had a hard time matching the color, but the new, larger, and more spacious storage space makes it much easier to use. Motorcycles these days have short tails, but as an old man, the old-fashioned long tail sticks in my mind. View detail
Fits: SUZUKI GSX750S-1100S, SUZUKI GSX750S1, SUZUKI GSX750SS, SUZUKI GSX1000S, SUZUKI GSX1100S
RearBrakes custom
The rear brake was changed to the same spec. as the front brake replacement.
I was able to replace it without any difficulty with Bolt On. The Large change was done with BrakeTouch as expected.
View detail
Fits: SUZUKI GSX750S Katana, SUZUKI gsx1100s katana (sword), SUZUKI GSX750S Katana, SUZUKI gsx1100s katana (sword)
OHNO SPEED OHNO SPEED BIG Fender Eliminator Kit B
The tools, ETC, and rain gear have been installed EXACTLY. I used to be afraid that the rain gear would fly away from the Seat on the highway, but now that I have this, it fits under the Seat. I wish I had purchased it earlier. View detail
Fits: SUZUKI GSX750, SUZUKI GSX750, SUZUKI GSX1000S, SUZUKI GSX1100, SUZUKI GSX1100, SUZUKI GSX1100
I had it installed at the store.
I had it installed at the store. View detail
It is very good
Used for MOSCaliper in R1.
I bought this product because when I replaced the pad with brembo's Z04, it became difficult to insert the pad pin when the pad spring was attached.
What is WeBig's response to the conformity inquiry? Buy it because it's a Universal Product, and you'll have to figure it out and put it on yourself." So I jumped down from the clean water stage, even though the price was a moderate 2,200 yen per bottle.
The result is …
Large was right!
Pad replacement has become extremely easy, and the pad movement has become Smooth.
However, MOSCaliper is a type where the pad pin is inserted and held in place with a βpin. The easier it is to insert, the easier it is to remove, so I think that wiring is necessary to prevent the pad from being removed.
View detail
Fits: SUZUKI GSX750 S1, SUZUKI GSX750 S2, SUZUKI GSX1000S, SUZUKI GSX1100S, SUZUKI GSX750 S1, SUZUKI GSX750 S2, SUZUKI GSX1000S, SUZUKI GSX1100S
Carburetor overhaul
I also got a new Choke Cable along with KATANA's OEMCarburetor overhaul. It is a matter of course, but Choke works Smooth and comfortable. View detail
more than expected
Installed on a gsx1100sKATANA. The wire was also replaced together for the convenience of handling. The GSX1100S KATANA's clutch is said to be heavy to begin with, but it becomes surprisingly light. However, I felt that the adjustment range became narrower and the clutch was slipping at first, but it became better after readjustment. I also own a 400KATANA, but I think it is the same level of lightness. The price is quite expensive, but I think it is worth it if you are worried about the weight of Clutch. View detail
Fits: SUZUKI GS1000, SUZUKI GSX1100S, SUZUKI GSX750 S1, SUZUKI GSX750 S2, SUZUKI GS1000, SUZUKI GSX1100S, SUZUKI GSX750 S1, SUZUKI GSX750 S2
Cell Motor is a consumable item.
If any Motorcycle is ridden for a long time, it will be engineered that many times = Cell Motor is doing its best. If you start to think, "What's wrong with it? If you start to think "What's wrong? View detail
Fits: SUZUKI GSX750, SUZUKI GSX750 , SUZUKI GSX750 , SUZUKI GSX1000S, SUZUKI GSX1100S, SUZUKI GSX1000S, SUZUKI GSX1100S
Great quality
Brass sleeves installed on back, if I didn't know better, they could have come in a Suzuki bag and nobody would be the wiser . Exact replicas. Really fast delivery. Price seems a little high each, but at least someone is willing to make the replacements and I do appreciate that. View detail
Fits: SUZUKI gsx1100s katana (sword), SUZUKI gsx1100s katana (sword), SUZUKI gsx1100s katana (sword), SUZUKI GSX750S Katana
It looks expensive, but I definitely think this is the way to go.
Replaced from NITRO RACING's Reduction kit on a GSX1100S (SR).
Simply considering it as an Engine Guard, it looks very expensive compared to other companies' products.
The KATANA is so effective and large that I recommend it as the first item to be installed in KATANA.
This product is not only an engine slider, but also a replacement for the engine hanger itself.
Improvement of rigidity of engine hanger
Rubber Bush with high shock-absorbing and vibration-absorbing functions is added to the engine hanger.
High-weight Stainless SteelWeight is used for the slider portion.
In addition to its function as an engine guard, the vibration control effect can be felt immediately after installation.
The anti-vibration performance here is so effective that vibration is almost imperceptible. It is very comfortable for long-distance touring and simple city driving.
KATANA's Engine is very often equipped with the Guard because the Crankcase side of the Point cover side can be cracked even by a slight fall.
It is not an expensive purchase in the sense that you can benefit from the anti-vibration performance at all times, even if not in the event of a fall.
In fact, it can be said to be cheaper than other companies' products, which only benefit when they fall over.
When installing, it is necessary to loosen the Engine hanger all the way and adjust the Engine position with Jack.
The Exhaust System also needs to be completely removed in some cases, so if you are not confident in your working environment and work, we recommend that you install the Exhaust System at the Shop.
In my case, I was able to install the exhaust system without removing it completely.
View detail
Used on a lost vehicle GSX750E4
In converting a GSX750E4 to mosfet to fix a battery buildup.
I was looking for parts and came across this one.
In fact, it worked normally without any glitches.
It is still in great shape and the battery is no longer rising.
View detail
KATANA Clutch holder
Introduced to improve the feel of Clutch. It is now easier to grip. ?? View detail
Fits: SUZUKI GS1000, SUZUKI GSX1100S, SUZUKI GSX750 S1, SUZUKI GSX750 S2, SUZUKI GS1000, SUZUKI GSX1100S, SUZUKI GSX750 S1, SUZUKI GSX750 S2
saviour
KATANA's CellMotor died, but due to lack of OEM, we purchased this one. It is working fine with no particular problems. View detail
That's a lot easier
Clutch operation has definitely become easier. However, the grip has become a little larger.
The drawback is that it is expensive.
View detail
I find them more reliable than weldments.
Bracket with Carbon plate for Brembo RCS Master.
The welded tank brackets that are commonly used are inevitably subject to human intervention in the manufacturing process&I have the impression that it is unclear to what extent they accurately inspect the products that are sold at a unit price of about 5,000 yen, and in fact there have been situations where they have broken due to vibration while the circuit is running.
What I think is out of the question is a one-piece simple Aluminum plate curved thing, or one that looks like it should be seared and bent for use. I hope they at least put a Rib on it to make it stronger.
The carbon plate will take advantage of the stiffness of the carbon to drink in the vibration.
I think the RedAnodized color of Aluminum is a bit embarrassing. (Image to be used with Initial Adjuster of the same Brand?) The bolt that comes with it should be the same high tensile steel as brembo.
View detail
Fits: SUZUKI gsx1100s katana (sword), SUZUKI gsx1100s katana (sword), SUZUKI gsx1100s katana (sword), SUZUKI GSX750S Katana
The quality of the finish, its function as a Slider, and other features all make it a highly satisfactory product.
I installed it in case of a fall, standing up, etc. It is very sturdy and What if?" I believe that the body of the vehicle will be adequately protected even when the
The finishing of each part is also excellent, and it is also useful for dress-up.
View detail