Reviews
Fits: SUZUKI GSX750 S1, SUZUKI GSX750 S2, SUZUKI GSX1000S, SUZUKI GSX1100S, SUZUKI GSX750 S1, SUZUKI GSX750 S2, SUZUKI GSX1000S, SUZUKI GSX1100S
Carburetor overhaul
I also got a new Choke Cable along with KATANA's OEMCarburetor overhaul. It is a matter of course, but Choke works Smooth and comfortable. View detail
Used for Z750four
When I replaced the plug cord, I purchased it to check the number of cylinders.
We wanted something as inexpensive as possible, as long as we knew the number, and it turned out to be just the right purchase.
The unique shape makes it easy to attach to the plug cord, and I am satisfied with the Large change.
The actual product was smaller than I had expected.
View detail
The quality is solid and sturdy.
We started using the system in April 2017 and have been using it for 6.5 years.
I am only a little concerned about retrofitted parts, so I inspect them only occasionally on the side of something.
Obviously, ・・・・ no problem. I will ask them to keep up the good work.
View detail
Fits: SUZUKI GSX750 SS, SUZUKI GSX750 S2, SUZUKI GSX750 S1, SUZUKI GSX750 SS, SUZUKI GSX750 S2, SUZUKI GSX750 S1
Reprint edition
I am very grateful to be able to purchase a new one for my tiller Handlebar. View detail
Fits: SUZUKI GSX750S Katana, SUZUKI GSX750S Katana, SUZUKI GSX750S Katana, SUZUKI GS1000E/S
Reprint edition
I am very grateful to be able to purchase a new one for my tiller Handlebar. View detail
Fits: SUZUKI GSX750S Katana, SUZUKI GSX750S Katana, SUZUKI GSX750S Katana, SUZUKI GS1000E/S
You must be relieved.
We specialize in KATANA.
You must be relieved.
The Reinforced Clutch made it much heavier.
Seems to be a little lighter.
It has the same shape as the OEM.
No discomfort.
The price is also better than a certain unicorn store.
I think it was somewhat cheaper.
View detail
Fits: SUZUKI GSX750 SS, SUZUKI GSX750 S2, SUZUKI GSX750 S1, SUZUKI GSX750 SS, SUZUKI GSX750 S2, SUZUKI GSX750 S1
This is a must-have item for installing a tiller handlebar.
I bought it because I ride it with Handlebar, a tiller, depending on my mood. View detail
Fits: SUZUKI GSX750S Katana, SUZUKI GSX750S Katana, SUZUKI GSX750S Katana, SUZUKI GS1000E/S
This is a must-have item for installing a tiller handlebar.
I bought it because I ride it with Handlebar, a tiller, depending on my mood. View detail
Fits: SUZUKI GSX1000S KATANA (KATANA), SUZUKI GSX1100S KATANA (KATANA), SUZUKI GSX750 KATANA
You were right to buy it!
I purchased this product to install ETCBody inside Cowl. I was able to install it in my KATANA without any modification. I am very satisfied! View detail
Good Bracket.
I used it to install the ETC Sensor in the Cowl. That's a handy Bracket! View detail
slightly expensive
It's pitch black.
Cool
If you don't mind the color.
I have something a little cheaper.
I bought it anyway.
Great texture.
Easy to operate.
Clutch is light
View detail
That's pretty good!
It is not via Mr. Webike, but it is a shop in conjunction with FCC Clutch Kit in the spring of last year It has been fitted to the
It is often said that Nanahan Katana has a heavy Clutch, but my car is a little I didn't think it was that hard because of the fact that I included the Release of Long But..
It was highly praised on the blog of Mr. RY of Takarazuka, and I wondered if it was fifty elbows instead of fifty shoulders When we consulted with you because the Left arm had become painful at the Black version of the accidental We were lucky to ask for this as we happened to have it in stock and had time to work on it
It's a great way to cut off your Paris and connect with it
Gear changing has become lighter and Neutral at the time of stoppage comes out easily
The Lever operation is also tightly controlled and comfortable
However, since Lever's Stroke increases, the Clutch feels a bit distant until you get used to it I suppose You may not like it here
If you're considering buying one, you'd better check the Lever ratio
View detail
Fits: SUZUKI GSX1000S KATANA (KATANA), SUZUKI GSX1100S KATANA (KATANA), SUZUKI GSX750 KATANA
Just fit!
I got it 3 years ago as a direct purchase without going through Webike (sorry)
I've heard that there are a lot of individual differences in the KATANA (I've known other motorcycles for the past 30 years) There are some people who had a hard time with it, but my individual seems to have had It fit perfectly and neatly
I bought this one along with SensorBracket, thinking I might use it at some point, but this one is not I still haven't been able to play an active role
But the texture is good and the rigidity is sufficient, so I'm happy with it
They will be sleeping in the Cowl until the day we plan to increase the light intensity
View detail
Fits: SUZUKI GSX1000S, SUZUKI GSX1100S
OHNO SPEED for your peace of mind
OHNO SPEED's products have always helped me, but the Clutch CableWire is the first time I've used it I'm grateful for the Large weirdness of getting old Motorcycle supplies at a reasonable price! Hey
However, others have commented on this 'Plenty of PTFEGel' I was also expecting to see the same thing, but it didn't seem to be injected... OHNO SPEED's website for guidance I guess the Spec. has changed a little bit because that phrase was missing from the I wanted to use it right away, so I sprayed in Teflon Lub of RK that I had on hand and installed it I did
View detail
It's OHNO SPEED for KATANA
I didn't go through Webike and got it directly from him (sorry)
Surface in the space under the Visor of the Cowl with ETC installation in other shops I had an Antennas installed on my Fastener but relocated it with this product There may be other similar products out there, but I prefer to use OHNO SPEED's for peace of mind
View detail
ETC Sensor relocation
I purchased ETC Sensor to move it from Cowl to Cowl. With reference to the photograph at Homepage, it was set to be close to the original angle. It is recommended because it is light and easy to install. View detail