Reviews
Fits: SUZUKI gsx1100s katana (sword), SUZUKI gsx1100s katana (sword), SUZUKI gsx1100s katana (sword), SUZUKI GSX750S Katana
It looks expensive, but I definitely think this is the way to go.
Replaced from NITRO RACING's Reduction kit on a GSX1100S (SR).
Simply considering it as an Engine Guard, it looks very expensive compared to other companies' products.
The KATANA is so effective and large that I recommend it as the first item to be installed in KATANA.
This product is not only an engine slider, but also a replacement for the engine hanger itself.
Improvement of rigidity of engine hanger
Rubber Bush with high shock-absorbing and vibration-absorbing functions is added to the engine hanger.
High-weight Stainless SteelWeight is used for the slider portion.
In addition to its function as an engine guard, the vibration control effect can be felt immediately after installation.
The anti-vibration performance here is so effective that vibration is almost imperceptible. It is very comfortable for long-distance touring and simple city driving.
KATANA's Engine is very often equipped with the Guard because the Crankcase side of the Point cover side can be cracked even by a slight fall.
It is not an expensive purchase in the sense that you can benefit from the anti-vibration performance at all times, even if not in the event of a fall.
In fact, it can be said to be cheaper than other companies' products, which only benefit when they fall over.
When installing, it is necessary to loosen the Engine hanger all the way and adjust the Engine position with Jack.
The Exhaust System also needs to be completely removed in some cases, so if you are not confident in your working environment and work, we recommend that you install the Exhaust System at the Shop.
In my case, I was able to install the exhaust system without removing it completely.
View detail
Racing Stand Hook
Reason for purchase
Since GOOSE does not have a center stand, I bought a very inexpensive racing stand and worked without a hook, using the rear swing arm to support the stand. It is not impossible, but it is easy to gap and may damage the Swing Arm.
For work efficiency, we decided that it would be better to add a Stand Hook and purchased it.
Although there are a variety of Material:I chose Plastic because I thought I would not have to worry about scuff marks. I also thought the price was reasonable.
【attachment】
The original Screw hole Cap was removed and the Screw hole was grimly and thoroughly cleaned to make sure the supplied Bolt would fit Smoothly before installation.
【Impressions】
I have not used other Stand Hooks of this type, so I can't compare, but I think it is something like this. I think it is not bad.
View detail
Fits: SUZUKI gsx1100s katana (sword), SUZUKI gsx1100s katana (sword), SUZUKI gsx1100s katana (sword), SUZUKI GSX750S Katana
The quality of the finish, its function as a Slider, and other features all make it a highly satisfactory product.
I installed it in case of a fall, standing up, etc. It is very sturdy and What if?" I believe that the body of the vehicle will be adequately protected even when the
The finishing of each part is also excellent, and it is also useful for dress-up.
View detail
Fits: SUZUKI GSX1100SY, SUZUKI GSX1100SD-SY, SUZUKI GSX1100SD, SUZUKI GSX750S2, SUZUKI GSX1000SD
It's a good luck charm for KATANA.
First of all, the texture and construction are excellent. It is a must-have for KATANA! Two people are recommended for installation. It is a well-made Slider! View detail
Fits: SUZUKI GSX1100S, SUZUKI GSX750S1
KATANA's Year, Engine Displacement Volume has different attachment shape on the Frame side
The model installed is OEM 16 in. Spec. With GSX 750 S 2, due to 87 GSX-R front and rear exchange and Front-Fork extension, the bevel angle is too deep in OEMSide Stand (Motorcycle sleeping too much) I bought it for oblique angle correction.
Spec. Although Side Stand is set to the shortest state at the minimum, it is still shallower than the OEM state (Motorcycle stands up) I think.
It is dirty after welding that is also present in other impulses, but it seems that it is such a thing. Personally I do not mind as it is as it is.
When installing, I think that the installation of Spring is Large strange. This time it was easy to install OEMSpring like a posted image if it used well instead of Hooker. Please see the images of other people in the normal wearing condition.
The problem after installation is the part for the Adjustable fixation just under the place where the STAND side Spring is hooked (Oh, it is easy to explain if the explanation is enclosed and each part name is on board!) Is to relax with the vibration of KATANA. I think that it is necessary to do loose checks on beans or apply it with a loosening prevention agent.
View detail