Reviews
Excellent
They are made from composite material and lighter than the stock ones Thinner and more elegance, especially with sr400 gas tank. You need to remove air box and to relocate all electric parts from left side. View detail
it works
This lock has a liltle bit different design, than the OEM, but works well. Mount holes and locking mechanism are the same. View detail
Fits: SUZUKI GRASS TRACKER GRASS TRACKER, SUZUKI GRASS TRACKER BIGBOY GRASS TRACKER BIGBOY
Design is perfect
I replaced the OEM heavy Fender with this one to kill time on the Corona. At first I was going to use a NORMAL iron fender with a sander, but I thought that the iron fender might have played a part in the rigidity of the front suspension of the motorcycle, so I bought this FRPMaterial. The result is Large satisfaction, FRPMaterial is more rigid than steel, the design is perfect and Dirt trackImage. I will ride with Gel finish Black for the time being. View detail
Up Fender essentials
I used it on my commuter car, XG250 TRICKER, and when I put the Male car Up Fender on it, I got my pants and boots soaked when I commute on rainy days, so I found this and bought it right away.
These are good items that hold down the splash just like a normal fender and do not sacrifice the looks and performance of the Up Fender!
View detail
The one and only, unprocessed and perfect Up Fender
I used it for my commuter and Motocross car, the XG250 TRICKER?
It's a pimped-out version and looks classic and fits the XG250 TRICKER.
View detail
Reliability of OEM Parts etc.
The DAYTONA COZYSeat didn't come with a bracket for securing the car body, so I bought it.
Installation is very easy
The seat is securely fastened to the body of the car with this bracket and there is no wobble while driving.
It has been 4 years since I used it.
The leather of the seat was reupholstered after three years, but this Bracket can be used without any deterioration such as Rust.
View detail
Fits the TU250 perfectly
Impressed with the great quality of this mudguard; fits the TU250 perfectly and a real improvement on the stock for a much more refined look. View detail
A great substitute for the stock fender
It looks really good, as it is shorter and more compact. The quality of the material used is sturdy and firm. The paint blends well with the stock black color of my W800 View detail
Oscar goodness
As good as the short rear fender. Great fit, great value. Looks so much cleaner than the original front fender. But you have to live with lot more water on you when it rains. Exactly what I wanted! View detail
Good old Oscar
Oscar plastics are usually first grade after market parts. As this little fender shows again. Looks very sexy on my beloved bike! Good value for money! View detail
Larry and transformation
XG250 TRICKER 's crunchy haunchiko Style has been improved considerably! Because OEM's Front fender can not be used as it is, it is not easy to put the front half in a bagasse and the back part of the back is made with Mud Flap. On rainy days you will almost receive no mud Shower from below.
After that is PsychoMask? It has become wanting that one too ~
View detail
If you are replacing the fender without removing the wheel, it gonna take some time since the bolts are installed on the inner side of the forks. Use the smallest wrench and it can barely turn the bolts bit by bit. The look and the build of the fender
If you are replacing the fender without removing the wheel, it gonna take some time since the bolts are installed on the inner side of the forks. Use the smallest wrench and it can barely turn the bolts bit by bit. The look and the build of the fender is quite nice. But the fender are cut from the composite after the paint work. therefore you can see the cut mark on the edge of the fender. It is no big deal if you gonna repaint it with color match your bike. But if you have a black edition W800, be prepare to sand off some of the sharp edge and repaint before installation. View detail
The fitting was very easy and it fit perfectly. It has a slimmer look after replace the bulky tail light , the indicators and also with the shorter fender.
The fitting was very easy and it fit perfectly. It has a slimmer look after replace the bulky tail light , the indicators and also with the shorter fender. View detail
It does what is supposed to do. Starting a new seat this will help me not to ruin the original one, and to easily switch between them. For the one's in doubt, received the part within 7 days form Japan to Portugal. Perfect service!
It does what is supposed to do. Starting a new seat this will help me not to ruin the original one, and to easily switch between them. For the one's in doubt, received the part within 7 days form Japan to Portugal. Perfect service! View detail
To install these side covers, it is required that you use the Electrical Equipment Holding Plate (W-EP1). You will also need 2 K&N air filters (W-RC-0981) and a K&N breather filter (62-1020). In addition, you will also have to install new jets and tune yo
To install these side covers, it is required that you use the Electrical Equipment Holding Plate (W-EP1). You will also need 2 K&N air filters (W-RC-0981) and a K&N breather filter (62-1020). In addition, you will also have to install new jets and tune your carbs to make up for the added air. Straight forward install. There are directions online on how to remove the stock air box. Some of the electronics get installed on the holding plate then everything gets tucked snug. These are flexible and fit well using your existing bolts/screws. View detail
Nice side cover. Fit well and, as shown in the picture, shows off the aftermarket air filter. I sure can't find any fault in it and am pleased at the new, clean, compact look.
Nice side cover. Fit well and, as shown in the picture, shows off the aftermarket air filter. I sure can't find any fault in it and am pleased at the new, clean, compact look. View detail