Reviews
I miss the colors and design.
Good old-fashioned color and design. View detail
The manufacturer's logo can be added to the seat!
When I reupholstered the Seat of my XE50, the HONDALogo behind the Seat was gone and I missed it design-wise, so I bought it to put my handmade Manufacturer logo in it.
Since Holy Equip specializes in VINTAGEOff-road, Logo's period consideration is perfect for creating a 70s-80s atmosphere.
This time I purchased the larger size, but it was Exactly in the LogoSpace at the back end of the Seat.
StencilSeat is applied to the Seat fabric and sprayed with Dye-Q to complete the process. It is important to make sure the surface to be applied is clean and the pitch is tight.
In that regard, I might want to use a more adhesive Material.
Nevertheless, it is nice to be able to lineup such a useful product at a low price.
View detail
I missed it! And I bought it!
Very nostalgic purchase for my generation! However
Since it is a cut letter type, the first step is to start from the base paper with each Seat for positioning.
I tried to peel it off, but the adhesive side of Sticker
The slippery part of the base paper peeled off and came with it.
I cannot peel it off well.
I had no choice but to use Cutter to get the thin surface of the mount that comes with it little by little.
While peeling off, do not peel off from the Seat for positioning.
With care, I managed to peel it off without failure.
It's worth reprinting the old Design, though.
I'm not sure about the quality for the price.
View detail
It gives a retro look.
I'm currently collecting Stickers for my GSX, and I'm looking for a Sticker that is a little bit older than the current Stickers and has a retro look.
This is a Champion sticker, which used to be on the old Racers.
Hollyquip has a lot of VINTAGE style stickers. This one is casually attached to a cowl.
good point
The design is a faithful replica of the original.
Sticker's Material is also good. It's just expensive.
There are also a lot of cool stickers that can be used for Helmets and cars.
A bad point
Overpriced.
It's expensive when you think about it as a single sticker, but I think it's safer and cheaper than paying for a large piece of VINTAGE authentic sticker that you're worried about the durability of.
I will try to find a different Design next time.
View detail
First of all, they don't sell it.
The old design KYBSticker is not sold here, and it is not available at Auction.
When you put this Sticker on the front fork outer, you can taste the atmosphere like MORIWAKI MONSTER S2 of 1980's.
This is an atmosphere that the current KYBSticker does not provide.
View detail
Unlikely Sticker
Largeness and color are good.
The texture of the Material is high and the adhesive strength is strong and sticks well.
Vintage's Sticker has a weaker adhesive.
Above all, it is too wasteful to put it up. In such a case, this kind of Replica is
It's helpful
View detail
It has a retro feel to it
It's a good fit for the Racer replica, which has been getting more of a retro vibe lately The size is Small
The color is Tricolor, as promised by HRC, and Honda's cars couldn't be more different It's about as good as it gets; I think it was already HRC, not RSC, at the time of the NC29, but I'm not sure if it was even a little I wish I could make it look like that time
The quality of the Sticker is there, and I've been in eaves cover storage for about 18 months now I think it's doing pretty well for a small amount of production, with some fading of Red There were times when I ran in the rain or forgot to put Cover on, but the waterproof nature is also No problems, no peeling, etc. so far
It's a bit rich for a Sticker, but there aren't many people putting it up for that It's very satisfying
View detail
We can go back to the pre-nineties (?) Sticker
This is the old Logo sticker of SHOWA The current Logo which became italicized is also good for Parenthesis, but the old car has more of an old time atmosphere It's part of the fun to direct In that sense, I'm personally happy with it
Sticker is fixed to the backing paper with handmade atmosphere Sticker to the body of the car is a one-shot deal as the material of Sticker, so be careful! to Once it's in place, it's easy to tear when you peel it off (I got it.)
It is currently parked under the eaves of the parking lot for about half a year, but so far there seems to be no tendency for the color to fade or peel off I am relieved that there seems to be It seems to have some degree of waterproofness, although I will also ride in the rain
The downside is the price:Front fork and Quantity:Quantity with 2 sets:Pair (for Left and Right) It's a luxurious custom for a sticker
It's the best Match for an old car or a Racer replica that has entered the realm of old cars, and I personally I love it
View detail
Shoddy goods
I was surprised to receive it!
Seal quality like sweets premium. Big Remo Seal is a shabby material. It is surprising that 1000 yen Over. Not waterproof, even if it gets wet in the water I feel full of feeling It is a MotorcycleSticker but for interior w and w
View detail
Modified MD75 for Front Fork
Since I repainted, I peeled Front fork 's SHOWASticker, so I searched by Webike I found a vertical logo sticker of HondaRacer in the 1980' s so I bought it.
Also at that time, SHOWASticker had a black character 's vertical tension so I thought it was good to be Mania ___ ___ 0 : Pair (for Left and Right) Separately stuck.
In terms of Size, if you have two sizes after Large, you would like to purchase for CB and VTR.
View detail
Is it expensive?
FrontBottom case of VF750F (It is for VF 1000 R) I was looking for Cover's Sticker and bought this Sticker.
"It is Replica at that time as well as thinness, color and dimensions !!" What a heart-driven word! (SUPER BIKE in the 1980s? If you look at the picture of "SHOWA" Sticker Large Kid - The color is various.
However, I think that it is Large in this era.
Even if I put it directly in the Bottom case of Fork, I think that it is a little Large I think?.
Well, because it's a Sticker, how can I detach it if I do not like it?
I think that it is slightly expensive.
View detail
It is not tolerable
I put Fork decal on Fork's Outer tube.
It seems that Decal is a bit Large when it is SR400 Outer tube. I feel that Large Hi Fork is going well with you. I think that this should be referred to the image.
Well, since Decal itself is made of a thin material, it was easy to stick it to a cylindrical object like Fork, as preparation for pasting Parts cleaneretc. Would you like to remove oil well?.
And we are expecting how much weather resistance will be.
View detail
Retro!
Originally it is a decal of the swing arm but it stuck on the side glass of the car. Logo, design I feel good. I wanted this so I was glad to find it. Hiace became the atmosphere of the Showa era. (Lol) View detail