Reviews
There is BALI and it's dangerous.
As per the Title. I have no problem using it, but there is a lot of BALI and I almost cut my hand accidentally.
It is strongly recommended to remove the BALI by sandpaper, etc. before use.
This product is a recommendation because it will not burn or scorch the Motorcycle Cover when riding!
View detail
Fits: HARLEY-DAVIDSON V-RODFamily, HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON DYNAFamily
It lasted a year.
I am glad that they kept the car until the inspection. View detail
Different terminal Size
The model name "V-ROD" is listed in the compatible car models, and the year should not be a problem, but the terminals did not fit, so modification was required. It is a pity. View detail
How to remove
I was able to remove it by inserting the radio pliers as shown in the photo and pulling it out strongly while holding it down. I don't know if it can be used again, but I don't recommend it because it is a safety issue. View detail
Fits: HARLEY-DAVIDSON SPORTSTERFamily
A little long.
The description says it is compatible with OEM Style, but it is still a bit long. The accuracy is not good, and I could not install it without cutting it with Leutor. It may be difficult to say it is a good product. View detail
Torque
It's better to manage torque well. View detail
Fits: HARLEY-DAVIDSON Old schoolHand control by NeoFACTORY
Lever break, then.
Ideal for replacing a broken Lever.
However, the accuracy between Nut and Lever is poor, with no adjustment range….Brake master and Quantity:It's a shame because I had no problem with Lever in Set.
View detail
Fits: HARLEY-DAVIDSON Neofactory 5-3/4InchHeadlight
Not good.
The whole thing is cheap and the Lens cut is subtle, so I stopped using it right away. View detail
I thought it was All Screw.
I'm a little disappointed because I thought it was All Screw, but it was Half Screw, and I wanted to be able to check when I bought it. View detail
Fits: HARLEY-DAVIDSON For vehicles equipped with S&S Teardrop Air cleaner and High flow Air filter kit
rusted
There was a bit of Rust at the Bolt hole, which was a bit disappointing. View detail
It's melted.
The Washer melted when it was idling for about 40 minutes in the outdoor temperature of about 25-Degrees for RECS installation.
At this rate, I'll melt in mid-summer traffic.
I don't think you can use a hot breather Washer in the middle of summer traffic in Japan.
View detail
The length is perfect, but the size is too large.
I bought the 7/16 Washer here because Home center didn't have it. The diameter is perfect, but the Washer itself is larger than the size I wanted, so I had to return it. The return service was excellent.
It would be better if you know the outside diameter when you order.
This time it just didn't fit my use Pattern, but I thought the item itself was good. I'm sorry, Webig.
View detail
Fits: HARLEY-DAVIDSON Universal
Now
10year rion883 not fit...10 rion 883 does not fit. it was uncomfortable. Lack of explanation so sad ㅠㅠ Andksjscsiskdjsjskdsdjfksk View detail
Fits: HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON DYNAFamily
Not at all
How many times does it not fit? Does it go on as soon as you put it back on?
A defect! Bought it cheap, but you threw away the Gold? A product that just won't go on.
View detail
Fits: HARLEY-DAVIDSON Universal
Cheap and bastard
I originally used the Craftman Mirror, but I bought the StemMirror due to the Style change. NeoFACTORY products are hit or miss, but there are too many outliers. View detail
It broke down after a year.
I bought this one because the OEM was broken. It was good at first, but broke after a year. It had very little ride time and had only a few miles of use. I don't know if it's simply the quality of this product or if there are other reasons for the breakage of the regulator, but... View detail
Fits: Others
Ouch …
Can I easily take it on and off while wearing Gloves? I bought it, but when I tried to fasten the chinstrap tightly, the plastic part was stuck to the skin It's biting and extremely uncomfortable
I removed it immediately
I liked how easy it was to install
View detail
difficult to use
The installation was easier than any other product I've ever used, and the construction was very convincing It's just a matter of accuracy, and although it's possible to fix it in place with one touch, it doesn't come off at times I'm going to have a hard time with it 。 View detail
It may not be suitable for a motorcycle with a large vibration threshold
I installed it in GSX1100S KATANA. 2 times touring (about 1000?) Because the bracket is very thin, it is a large piece of vibration It doesn't seem to be suitable for Motorcycle Volume and tone are normal Horn Horn should ring This is not a problem for those who are View detail
Defective design Lens melts and Valve burns
Three weeks are used, but now three weeks a week to ride, three weeks now, the inside of Lens melted Valve expired. Lens is beginning to melt for the other. Valve will close soon.
I like the shape very much because Size is Small, but there is no gap between Valve and Cover, so the plastic Lens is almost in contact with Valve. Heat comes out as 23 w balls, but it is not designed to miss that heat. It seems that Plastic Lens is sold separately because it knows that and sells it. Body other than Lens, because shape is good, because it is a Gold genus, I like the appearance. I will try to explore whether it can be used instead of an LED bulb.
View detail