Reviews
Looks good. Fit nicely.
Compared to the old hose, this is much more flexible. Fitment is good, don't think there will be any issue. I can recommend this hose for replacement need. View detail
No different than OEMs
Purchased due to leaking oil line. I am glad that the quality is the same as OEM and the price is lower. I will buy again when it breaks. View detail
Genuine Continental Fuel Hose
I do have a lot of bikes come in with really bad fuel lines for one reason or another and I always like to have some of this hanging around for just this reason. One bike in particular had the original stock line which was far from good and this bike was literally a few years old, 2020. Really rigid line was replaced with this. I do like Continental fuel hose as it is proven to work exactly as it should and not be too rigid but also has enough flex to be abnle to loop around weird placements. This was well priced from Webike and they also packed my order with great care so not to damage or bend this hose where it should not be bent. It came as a nice loop.The flexibility is excellent. A really nice fit to the clamp fitment too. Very pleased, thanks Webike. View detail
As fuel pump piping in Fuel Tank
I bought a battered 900SS (900SL) and am Restore.
DUCATI features a fuel pump built into the tank, and the rubber hose connects the fuel pump to the piping in the tank that goes to the fuel cock.
I was going to use AN-BU cloth-wrapped hose, but when I soaked it in Gasoline as an experiment, I discovered that the adhesive-like paint that holds the cloth in place was being attacked, so I decided to use this high-performance hose.
As you have already noted, the quality of the Hose is superior to other Hoses.
Fuel Hoses sold by top brands such as DAYTONA, KITACO, and Posh are of course safe to use and do not easily crack over time as inferior Hoses do.
Therefore, for ordinary use, those hoses that are easily available will suffice.
However, if they are used as they are for years, or if they are used in such harsh places as tight bending, passing through places with great heat, or constantly exposed to direct sunlight, they tend to become Pushing stiff.
When you go there, this Hose is different.
It is the same hose that EuropeManufacturer uses in the engine room of a car, and we know from experience that it does not lose its flexibility even in the toughest conditions.
In any case, the quality is not hampered.
I used AN-BU's cloth-wrapped hose for the parts visible through the gaps in the Frame for visual appeal, but if there is no such reason, it is best to use this hose for all of them.
At least the Trouble caused by Fuel Hose should be wiped out.
View detail
Fits: HARLEY-DAVIDSON Universal
Millimeter but dare InchHose
When I installed an oil cooler on my XR250 using a universal type hose, I used a cloth mesh hose that I had on hand and when I installed it, the hose on the side where the OEM pipe was cut slipped out and I had a terrible time.
So I looked into using a stainless mesh hose that is close to the exhaust pipe, heat resistant, low expansion, and reasonably priced.
The Hose is pretty tight to install, but I looked at it with Idling for 30 minutes and this time it was Large sturdy.
Now we will be able to go out for a real test run.
It also fits tightly into the M8Banjo.
If you measure and buy in the length you need, you can use it without waste.
View detail
Fits: HARLEY-DAVIDSON Mainly used for oil lines.
Fuel line, this is the only choice.
Don't use hose, which is quickly altered by UV light, heat, and fuel, and should be replaced when it leaves a clear mark on the clamp. It is still convenient, although there are few opportunities for immediate delivery at Webig due to the spec. on the order. View detail
Different sizes
I purchased a different size, but this is the only one I would choose for Fuel Hose.
Products less expensive than this have low weather resistance and may harden or tear, so if reliability is important, high-end products should be used.
This probably will not deteriorate and tear in about 10 years.
View detail
Thicker than OEM
Cannot pass through hole in Crankcase, making it unusable. View detail
Durable
Vinyl is thick and has excellent oil and heat resistance, so it can be used in a variety of ways.
I use it for the fuel line and I can see the gasoline flowing into the rear hose and feel like I am customizing it. [Color] I'm glad it was Clear.
View detail
Durability.
The vinyl is thick and has excellent oil and heat resistance, so it can be used in a variety of ways. [Color] It was a good decision to go with Clear. View detail
Fits: HARLEY-DAVIDSON Mainly used for oil lines.
Reasonably flexible, easy to use!
I used it for the line of Oil cooler, and it has moderate flexibility.
Some of the hoes in the USA are hard, and some of the hoes in the US are large and odd to get around.
I will. I don't know how durable it is yet, but I'm hoping it's a manufacturer's product.
ContiNeBarrel is a GermanyManufacturer. It is a little expensive...
View detail
Fits: HARLEY-DAVIDSON Universal
Used to replace the Reservoir Tank Hose on the EvoFLSTC HERITAGE SOFTAIL CLASSIC Rear master
I used this Hose to replace the Reservoir Tank Hose of Harley's EvoFLSTC HERITAGE SOFTAIL CLASSIC and Rear master. fluid was seeping from the joint of the Reserver tank and Hose, and I thought about retightening the Band, but Because I thought that the Hose was also aging, I used this Hose and exchanged it. When the Hose was too soft, it was crushed when it was bent, but this Hose was moderately hard and it was convenient for the purpose of this use. The hose clamp is also NeoFACTORY's product (item number:003032). I bought 50cm clamp to have enough room, but 40cm was enough for my car. View detail
Fits: HARLEY-DAVIDSON Mainly used for Fuel line
Obviously, the quality is good
This Fuel Hose was recommended by a friend of mine when I had to renew my hardened Fuel Hose I replaced it with Hose
The quality is noticeably better than the Fuel Hose sold around here It's high, hard, but flexible
Fuel Hose is always bent and Quantity:It's often set, so if you're going to go for it, you want to make sure it's a good quality product !
View detail
Hose should not be stingy
Don't be stingy with Rubber hose
I used to wear cheap Hose from Made in Taiwan, but after about 3 years, the cracks popped in and out
Oil and Gasoline will bleed through A good hose will still crack after 10 years or more
Some things don't go in, and it's not even close... a Harley OEMHose is a 20 year old
I think Conti and others are also good products with high durability
View detail
There is no need for any other Hose other than this one
There are many different fuel hoses out there, but you can definitely find these proper You should choose the Manufacturer's
It cracks when it cures and is removed, it's not halfway through and is so soft that it sticks to you because it's not thick enough You can get rid of Stress, such as being stuck in Cook, all at once
It's not going to be funny if you're on the road and you have some kind of fuel system malfunction and you can't get it back because it's torn up when you take the hose off Not I still think it's a good idea to use the Rubber products made by the Tire makerClass company As long as
It's a crush-resistant fiber braided, so it's a no-browning effect that allows fuel to flow You can avoid the situation where you don't have any
View detail
Fits: HARLEY-DAVIDSON Mainly used for Fuel line
Strong & Quility
my bike is CB223 and i used Continental Fuel Hose its strong and feel good quiality , there no blocking or leacking problems . Talking about the fiting its easy and tight whevn you need remove from tank easily you can do it there no stuck or freez. i usually drive off roadas and it nver be problems theres no leak even from sharp things. its well lenth on and dont want to cut it , i suggest for every one who rides off roads. View detail
Fits: HARLEY-DAVIDSON Mainly used for Fuel line
Slightly slender
It is a bit slim, but it feels like not affecting the cold much. In my case, I felt it necessary to pay attention to handling in order to pass between Cylinder. View detail
Fits: HARLEY-DAVIDSON Universal
hard
The price is cheap and can be used normally, but it is hard compared to the famous Manufacturer's thing, so the handling was slightly Large strange when connected. Those who do not concern have no problem, but we can not Recommendation for people who do not care. View detail
Fits: HARLEY-DAVIDSON Universal
I used it for Hose for Oil cooler of Buell X1.
I attached Oil cooler to my Buell, but the attached Hose did not have enough Length and I could successfully install using this Hose purchased for for Repair. (*^^*)
You can also deal with items of Inch size and it will be very fun.
View detail
Fits: HARLEY-DAVIDSON Universal
EVOFLSTC HERITAGE SOFTAIL CLASSIC for GasolinePipe exchange
As Hose saw it in 95 years it got deteriorated, so I exchanged it. 40 centimeters between Cook and carburetor, Quantity : Pair (for Left and Right) There must be 40 centimeters between Tanks. The thickness is 1 / It is 4 Inch.. You can exchange without removing Tank. After replacement Gasoline smell has disappeared. It's Motorcycle 20 years ago so it can not be helped.
View detail