Reviews
Fits: HARLEY-DAVIDSON Vehicles with OEM CVCarburetor
Minimum Quantity to Overhaul carburetor:Set
I used this for an under-seat engine hole on a 2000 XL883XL1200C SPORTSTER 1200. The vehicle had been immobile for a long time and the Carburetor rubber parts were hardened and leaking fuel. The beauty of this kit is that it omits the Float, DiaphragmRubber, and other parts, and only requires a minimum quantity of parts.:The Carburetor functions have been restored and I am generally satisfied, but the rubber packing of the Float chamber does not fit perfectly and I am not able to assemble it. View detail
Fits: HARLEY-DAVIDSON SPORTSTERFamily
Thank goodness for OEMAir cleaner box support.
I used this on my 2000 883XL1200C SPORTSTER 1200. The air cleaner element is easily dirty from the inside due to the engine oil from the Breather, and the one before the replacement was sticky. Even so, I don't feel any deterioration in performance, but it still feels good to put on a new one. Also, I think it is good that the new Sponge part is stiffer and can be fixed firmly. I think that there are few users who use the old type and Normal air cleaner, so it is nice to have a new air cleaner element at a relatively low price. View detail
As the name suggests, Idling adjustment is now easy!
[How is it used?
It is Carburetor Vehicles, but when I am warming up and running with the Chalk pulled, I let the Plug cover it.
To avoid this, the Chalk is turned back on as soon as the engine starts, and the Idle Screw is used to make adjustments during warm-up operation.
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
Installation itself is easy, but care must be taken not to drop Washer or Packing.
If you count how many turns you made when removing the current Idle Screw, installation can be done smoothly.
It is too long and bloat, so it needs to be supported by something. I made the guide out of Stainless Steel Wire.
How was your experience with it?
I am Large satisfied with the ease of reaching and adjusting the Idling even in the straddle position.
Other items that would be helpful
Since there is no guide for rotation, it is a good idea to have something to mark the rotation. I am on Knob. The Smile badge. pasted.
View detail
Fits: HARLEY-DAVIDSON Most Harley HSRs using CVCarburetor and EFI, as well as Carburetor carburetors according to the CVCarburetor Air cleaner mount.
I installed it on my XLH883.
I purchased this product to use on my HarleyDavidson XLH883.
The price was reasonable and the installation accuracy was excellent.
One complaint is that the Chromium Plating has a strong Shiningly feel to it, which is good for the current XL1200C SPORTSTER 1200, but a little too bright for my older, rougher 883.
I think it would be great if there were also types such as Matte Black.
View detail
Purchased to match fuel economy.
I bought it to match the fuel tone.
I have purchased several different types to start setting and I recommend them for their quality!
View detail
Purchased to match fuel economy.
I bought it to match the fuel tone.
I have purchased several different types to start setting and I recommend them for their quality!
View detail
Purchased to match fuel economy.
I bought it to match the fuel tone.
I have purchased several different types to start setting and I recommend them for their quality!
View detail
For fuel setting.
Used for fuel setting.
I have purchased several kinds of products and they are of good quality and Recommendation.
View detail
Used for fuel setting
Used for fuel setting.
I have purchased several kinds of products and they are of good quality and Recommendation.
View detail
Used for fuel setting
Used for fuel setting.
I have purchased several kinds of products and they are of good quality and Recommendation.
View detail
Fits: HARLEY-DAVIDSON For S&S(E,G)carburetor
Just the right length.
Changed from OEMBolt type.
It is easy to use and just the right length.
View detail
Fits: HARLEY-DAVIDSON
Strongest Needle?
SUcarburetor's Needle.
BCG. part number, like vaccinations (laughter)
The reason why I bought it is because it is called the strongest (laughs).
Well, I'm not sure. In short, it is thin.
Looks like something Umeyasu Fujieda would use (laughs).
When I buy Needle from the UK, it's gold.
This is a very long term inventory (laughs).
It's pretty dull (laughs).
Also. it came in a Vinyl bag.
It's a bit of a mess to handle. You'd normally put it in a Case:。。。。
It's something that shouldn't be bent.
A little disappointed.
View detail
Fits: HARLEY-DAVIDSON Vehicles with OEM CVCarburetor
When I Rose again for Carburetor setting, …
I took the carburetor apart again for carburetor setting …
The Gasket has been stretched to a larger size and is no longer stuck in the groove;
It is not possible to reassemble the unit after setting it to "Rose".
Unfortunately, it was below my expectations…
I had no choice, so I reused the old one anyway…
View detail
carburetor tinkering
The OEM +Screw was not safe to work with as it was easy to get caught in the screw. 。 The large width provides a greater sense of security when tightening and is easier to maintain. View detail
Fits: HARLEY-DAVIDSON Cars with S&S SUPERE/GCarburetor
That's all we need!
I purchased this BasicRebuiltKit because HarleyShovel's Ecarburetor overflowed.
After disassembling the carburetor, I had guessed that the most likely problem areas were around the float valve and acceleration pump.
Therefore, we decided that this Basic type was sufficient.
As it turned out, it was the right decision.
NeoFac Handling's RebuiltKit is also helpful because there are other Types to suit the scope of impact.
Basically, all parts in Kit were replaced.
The attached hose is not heat-resistant, so it is recommended to adjust the length and fix it to the body so that it does not come in contact with the exhaust system, etc.
I hit the Exhaust System and it melted.
I think it is good to have one set for emergencies.
View detail
The exchange is Large!
This is a pure product replacement.
The accompanying information, such as "You will need this," is included.
I wish they sold liquid Gasket and silicon grease at the same place.
View detail
Fits: HARLEY-DAVIDSON For vehicles equipped with S&S Teardrop Air cleaner and High flow Air filter kit
without breaking.
I have used it for about 5000 km and it has not broken from the root. View detail
Fits: HARLEY-DAVIDSON S&STeardropAir cleaner
About 5,000 kilometers
I have used it for about 5000 km and it has some dirt on it that the dedicated Spray does not remove. It may be time to replace it soon. View detail
Fits: HARLEY-DAVIDSON Vehicles equipped with S&SSUPERE/GCarburetor
I think it could be reused.
I have overhauled it several times, but I don't see any glitches, so I think it can be reused. View detail
when removing
I can't go back to OEM minus screws. View detail