Reviews
Fits: HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON SPORTSTERFamily
Check is required after 100,000 km.
Low-speed knocking began to occur and fuel consumption was deteriorating, so we checked the OEM coil that had been used for 100,000 km and found that the secondary coil resistance value exceeded the standard value by a large amount, so we replaced the coil.
As a result, low-speed knocking was eliminated, resulting in a torquey fee ring throughout the entire range and improved fuel economy.
The texture is also quite good.
View detail
for Replacement
I purchased this product for replacement and it works just as well as the OEM Product.
It is cheaper than OEM, so it is a recommendation.
View detail
for adjustment
I purchased this for adjustment. It can be used normally without any problems. View detail
for adjustment
I purchased this for adjustment. It can be used normally without any problems. View detail
Durability.
The vinyl is thick and has excellent oil and heat resistance, so it can be used in a variety of ways. [Color] It was a good decision to go with Clear. View detail
Stylish Idle Screw
The brass texture is very stylish and makes it look much better, and the Idle Screw is easy to adjust and turn with your fingertips. View detail
Fits: HARLEY-DAVIDSON Cars with S&S SUPERE/GCarburetor
It is safe to use
I thought that there were no repair parts, but I found out that there was a single item for sale, which was a big help. I thought there were no Repair Parts, but I found a Single Item for sale. View detail
Fits: HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON SPORTSTERFamily
for Replacement
This product is cheaper than OEM and can be used normally. The product is well-made and quite good. View detail
Fits: HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON Twin cam 99-10 (except Tourer 08 and later)
It can be used normally
The texture and feel of the product is normal; I am satisfied with the product because it is cheaper than OEM and usable. View detail
Fits: HARLEY-DAVIDSON Cars with S&S ECarburetor
High quality.
It is more expensive because it is Repair Parts, but I think it is economical because you can replace only the parts you need. Ecarburetor is a good company to buy single item parts. View detail
![[SR] Primary Cover Gasket](https://img.webike-cdn.net/catalogue/images/45953/L014035_TS.jpg)
Fits: HARLEY-DAVIDSON FLT, HARLEY-DAVIDSON FXR SUPERGLIDE
mating face
The matching surface is solid, and the price is lower than OEM products, which is a big help. View detail
I'm happy with the way it looks.
The price is very reasonable, but it looks very good, and when you put on the Filter, the custom feeling goes up considerably. [Color] Clear's Fuel hose and Skeleton's Fuel filter Matching are my personal favorites. View detail
Fits: HARLEY-DAVIDSON FLT, HARLEY-DAVIDSON FXR SUPERGLIDE
easy to attach
OilNo leaks, great product, very easy to put on. Now I'm worried about durability. View detail
Fits: HARLEY-DAVIDSON FLT, HARLEY-DAVIDSON FXR SUPERGLIDE
There you go.
Compared to OEMs, it's not that badly made. View detail
Fits: HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON SOFTAILFamily
Champion Famous
Champion's Plug is kind of like Parenthesis!
The Champion's name is all that's needed to raise your Tension!
And the price is right!
View detail
Fits: HARLEY-DAVIDSON OEMfor CV Carburetor
This is it!
This is okay! It's not too long, which is another nice touch! View detail
Size feeling is delicate
Compared to the NORMAL Carburetor Joint, the quality is fine, but the size feels a little too small. It is necessary to keep the balance of the front and rear at an even level. View detail
Fits: HARLEY-DAVIDSON S&STeardropAir cleaner
The protrusion.
If you don't mind it sticking out, it's a good product. View detail
Fits: HARLEY-DAVIDSON For vehicles equipped with S&S Teardrop Air cleaner and High flow Air filter kit
Lack of strength is
There is no lack of strength, but care must be taken to prevent rusting. View detail
I was so scared of Ketchum that I changed my mind!
I used to use a Brass one on my Shovel head Kick pedal, but I was afraid of the ketchup Material:I've changed to this product from Rubber. I decided to change when I was hit by a calf once, although there are many things to hit the calf with a kettle.
I think it's OEM Shape, but it doesn't have the Harley logo on it.
The price is higher just to include Logo, so this product is sufficient.
KICK on a rainy day is also safe because it does not slip.
It is easy to exchange, so I think it is good to change to other Pedal in the mood.
By the way, it has a Plate washer which is curved when installing, but Pedal is not fixed basically and is P LampRAN.
I don't care, so it's OK.
View detail