Reviews
Indicator bulb out of service.
It was used due to a broken bulb in Indicator.
It's working fine
View detail
On a ball run out.
I bought this for replacement because the bulb was out!
It was fixed normally!
View detail
It works well enough!
As a meter bracket, it is inexpensive, but it is useful enough. View detail
Back, I have a theory that it will be unavailable.
I used to be quite fond of the Black GlassTube for protecting the Wiring section, but I had wondered why Black was being discontinued in many Cases recently.
Apparently it's part of the global regulation of rohs? The Black GlassTube is apparently out of stock.
I'm not sure how beautiful it would be to have a BlackFrame with White GlassTube protection.
View detail
Price suitable
I bought two of them, including a spare.
The first one failed after 2 days, the second one is working normally.
Well, I guess it's worth the price.
I think DC vehicles should have IC Blinker Relay in them to last longer.
View detail
Best for heat resistant Wiring part
I used NeoFACTORY's Colgate tube and it was good, so I bought the Silicon tube this time.
The effect of heat resistance is not understood well yet, but I tried to adhere to the Engine which became hot, but I think that there is heat resistance effect and it is not easy to kink, so it is helpful.
Anyway, the price is cheap, so it is very helpful.
View detail
individualistic
Installed on my HondaJAZZ. I chose it because of its unique design. The degree of freedom of installation is quite, but the screw thread of the screw which fixes the body and bracket is not enough, so it is easy to loosen. After I bought it, I found out that it is difficult to get the bulb is BA9S and the price is high. View detail
No way …
I bought these for my '06 XL883R. It's a good idea to have a spare pair of shoes that fits your needs. View detail
it could be better
The brake light has two wires, not three. does not have a ground wire. two lamps. 5 watts (type A 41 mm) side light and 10 watts (type C) a stor signal. View detail
Small terminal too!
Because it is a Mini switch, the terminal is also thin and thin, it seems to break soon if you apply force. There is only Solder attachment for installation. But it looks good! View detail
Price suitable
I feel like VINTAGETape is a different thing. Because it is Fleece, I will fluffy.. Whether Tape itself is thin, or if it is 1 volume, it looks transparent. Although it is weak, it sticks normally and you can use it. View detail
Push button
I bought it for Cell start, but it is smaller than I thought. Small a little Large I wonder if I thought it was good, but depending on where you install it might be fine View detail
Fits: HARLEY-DAVIDSON Universal
Inexpensive at ON-OFF-ON. I can use it properly.
For the Custom of SR 400, we use Relay and use High Low switching.
The Manufacturer is a little cheaper and there are also Small Type's,
I chose medium size kids looking at safety.
ON - OFF - ON formula It is considerably cheap in Toggle, and it is a lot difference
There is none. If you buy Chinese made bulk, you can buy it cheaper,
I bought ten and after all it was Quantity : 5pcs. Because it can only be used or ordinary ^ ^;
As I thought, this product is recommended.
The difficulty is non waterproof thing. Since it is not assumed for outdoor use and there is no water drain hole,
It will be poor contact in half a year.
This can be solved by adding Waterproof Cover, but it looks like it is not good
It will become.. The person who wants to make use of Sharp looks is Waterproof Specification
Toggle (← It is not absolute with this one) I think that is good..
View detail
Use for just a moment
I bought it to replace the LightBody and to install it together, ... I dropped it on the floor with Light when attached, it seemed that I banged Valve 's connection part ... It got useless in 2, 30 minutes Was.
Although it may not hold as Impression ....
I feel that the difference between HIGH and LOW is Large. LOW side felt close to OEMValve color. I usually thought that I wish I would use White more than just using LOW a lot.
I think whether it is expensive compared to things of around 2 thousand yen at home center and around 1,000 yen. Perhaps I expected too much performance, but it is same as the cheap item of Home center. I think that it is the performance of, and it is the real thing that it does not hurt even if it fails cheaply. Since Halogen disappears soon, consumables are expensive, so I also want to lower Cost.
By the way, ...
Failed (I dropped it like me) If you are using Valve ... which is Valve you will be ..., it is obvious that the bulb is out, Meter's HIGHLamp will remain lit even if the Light switch is set to LOW, why the Front RightBlinker will not be attached and why Whether the voltage goes down or the auxiliary light also turns off (low rotation - It lights up in Idling). What a symptom appeared.
Although it was impatient considerably, although it was said that it was mild or replaced with Valve, it was all restored, but in severe cases it seems that Wiring etc melts and it is dangerous anyhow.
As a matter of course, do not drop anything, do not use doubtful Valve.
View detail
Fits: HARLEY-DAVIDSON Universal
Purchased according to Bracket.
Because it is an amateur, it can not do Spacer processing etc., it is troublesome. Unlike Bracket, painting should be solid as well. But it's too expensive for over 1000 yen with this.
It is necessary if you use Bracket, if you do not use it, Suspension will become diagonal and break.
View detail
Replace Handlebar Switch!
I wanted to make the SR400's Handlebar Switch neat, so I decided to purchase it!
Wiring pierced Handlebar,
Handlebar through Spec. Changed to.
Drilling when passing Wiring through the inside of Handlebar,
The work of passing through Wiring is very loud.
After that the Switch itself was also quite Large because it had to attach Wiring with Solder iron.
However, looks are neat and satisfying Large.
View detail
Fits: HARLEY-DAVIDSON SPORTSTERFamily
It is satisfied, if it is cheap and is this Quality. wiring and a Coupler are intelligibly easy to attach.
It is satisfied, if it is cheap and is this Quality.
wiring and a Coupler are intelligibly easy to attach.
View detail