Reviews
Because of cheapness?
Mokumoku when running on a pouring day.
A little fun with steam.
The color fading is great, perhaps due to the cheapness of the product.
Large might be sturdy if wrapped in a double layer, but
Space-wise, it's tough.
It would be stupid to rewind it just for the color.
As far as looks go, it will be White in a few months.
Consumables.
Color:Gray, Black, at least not this white.
I'm wondering if anyone knows of a product that says it won't fade.
I'd like to know so much ….
View detail
Fits: HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON SPORTSTERFamily
I think it is the same as OEM.
I used this when I replaced the exhaust pipe in North America.
I bought it because I had been removing and replacing the one already installed and it was getting loose and I didn't know when it would crack due to rusting.
I was under the impression that it was a little thinner than OEM. I had the impression that it was a little thinner than OEM, but I was able to install and tighten it without any problems.
If you are not particular about OEM, it's ok.
View detail
Inch size。
Be careful not to spread it too wide when you put it on, because the shape will be distorted. It may not be easy to handle ^^^. View detail
Fits: HARLEY-DAVIDSON Universal
Sound quality is Goo!Quality is bad.
I installed it on my Evo Drag Exhaust System. I've been using a cheap Silencer with Glass Wool wrapped around it. "Push-push-push." I replaced it with this product because the exhaust sound was strange. Because I knew that Glass Wool was wrapped in Tape in advance information, I reinforced it with Stainless Steel Wire and then installed it! I tried to install it but it was not easy. When I was struggling, the Glass Wool fell down easily and it became a cruel figure. This Glass Wool is as fragile as futon cotton. In the end, I peeled off the first Glass Wool and rewrapped it with my own Glass Wool. And one of them went in easily, but the other one couldn't go in because the diameter of the exit part was 1mm too thick. I shaved the part which hit with a sander a little and installed it.
It is the exhaust sound of the important thing, but the sound quality is satisfactory with the crispness of the thumping in the bass sound like Harley. When I ran again, the acceleration became good enough to feel. The volume is larger than I thought, and the Silencer that I have been using is clearly quieter.
The sound quality was satisfactory, but I thought the overall quality was low and could use some improvement.
View detail
Fits: HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON SOFTAILFamily
Thanks for the low price tag.
It is an accessory part of the Slip-on Silencer, but it is an unexpectedly expensive part.
I bought it because it was the cheapest on the mail order site.
I don't know if it's OEM or not, but it doesn't mean it won't run without this part, and as long as it's installed and there's no exhaust gas leaks, there's no problem.
I actually put it on and it doesn't feel strange.
When you remove and install the exhaust system in maintenance, this part will be damaged. (Some wear and tear will occur even with a sequential change)
Since there is one exhaust system and two exhaust systems, you will need two to replace the parts.
Because the regular price is over $1,000, it is thankful that it can be purchased for a few hundred yen because it is quite an expense, Large change.
View detail
I think it's good
It's more expensive to buy at a motorcycle supply store.
This item is cheap to buy in the length you need.
But the color will come off after a few rainy runs.
Think of it as a consumable item that you replace once a year.
View detail
That's right..
I got it because it's black
get wet and dry
get wet and dry
get wet and dry
The color will fade in three to four months..
I'm happy with the original purpose of this product, which was to prevent burns
View detail
In the beginning
The color drains and becomes Silver
It's Silver before summer, such as during the rainy season
View detail
Fits: HARLEY-DAVIDSON Universal
There are places where prices are good, but the appearance is not bad
Hunting's BALI remained and could not be inserted
When I cut BALI it was Exactly to 45 pie
Precision may be good
I just peeked in, but the sound reduction effect seemed almost impossible
I thought that this Quality is available without ten thousand yen
Quantity : I bought 2pc but Quantity : It may be similar to 2 pc and product error is small
Included Parts : You may as well as buy another BALI squeeze tightening band
View detail
Scale?
Because the Riding Pants melted and exchanged due to exchanger pipe exchange, I was looking for a Heat Guard, where I purchased it because Size was exactly right.
Since there is no problem because there is no direct contact, since Plate's terminal had BALI, the score is modest.
View detail
For heat protection
Exhaust pipe and Under Cowl are quite close and I bought it with countermeasures. Heat Insulating Material is also stretched, but I wanted to wind Vantage on the Exhaust pipe because it is in short supply, but because it stands strange when it is White, I selected this item of Black color. View detail
Attention to over tightening.
Used for Conversion Adapter connecting Silencer and Exhaust pipe with different diameters.
Exhaust pipe and Conversion Adapter use welding, Silicon gasket, Exhaust SystemTape, VantageClamp.
Silencer and Conversion Adapter use Silicon gasket, VantageClamp.
The first one I bought two was not tightened enough to tighten how much it was tightened "Bakki" Sounds broken down.
I think that it is not limited to this product, but it is caution for overtightening.
However, it is generally satisfactory in terms of Cost performance.
View detail
Attention to over tightening.
Used for Conversion Adapter connecting Silencer and Exhaust pipe with different diameters.
Exhaust pipe and Conversion Adapter use welding, Silicon gasket, VantageClamp.
Silencer and Conversion Adapter use Silicon gasket, VantageClamp.
I think that it is the same for other products, but if you do not know how fast you should tighten and tighten it too much will collapse.
Cost performance is acceptable.
View detail
It purchases, although a Normal exhaust pipe and a Silencer are connected with automobile inspections. For the time being, if you would like to only tie, it is enough.
It purchases, although a Normal exhaust pipe and a Silencer are connected with automobile inspections.
For the time being, if you would like to only tie, it is enough.
View detail