Reviews
There is BALI and it's dangerous.
As per the Title. I have no problem using it, but there is a lot of BALI and I almost cut my hand accidentally.
It is strongly recommended to remove the BALI by sandpaper, etc. before use.
This product is a recommendation because it will not burn or scorch the Motorcycle Cover when riding!
View detail
Fits: HARLEY-DAVIDSON V-RODFamily, HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON DYNAFamily
It lasted a year.
I am glad that they kept the car until the inspection. View detail
Different terminal Size
The model name "V-ROD" is listed in the compatible car models, and the year should not be a problem, but the terminals did not fit, so modification was required. It is a pity. View detail
Fits: HARLEY-DAVIDSON SPORTSTERFamily
A little long.
The description says it is compatible with OEM Style, but it is still a bit long. The accuracy is not good, and I could not install it without cutting it with Leutor. It may be difficult to say it is a good product. View detail
Fits: HARLEY-DAVIDSON Old schoolHand control by NeoFACTORY
Lever break, then.
Ideal for replacing a broken Lever.
However, the accuracy between Nut and Lever is poor, with no adjustment range….Brake master and Quantity:It's a shame because I had no problem with Lever in Set.
View detail
Fits: HARLEY-DAVIDSON Neofactory 5-3/4InchHeadlight
Not good.
The whole thing is cheap and the Lens cut is subtle, so I stopped using it right away. View detail
Fits: HARLEY-DAVIDSON For vehicles equipped with S&S Teardrop Air cleaner and High flow Air filter kit
rusted
There was a bit of Rust at the Bolt hole, which was a bit disappointing. View detail
It's melted.
The Washer melted when it was idling for about 40 minutes in the outdoor temperature of about 25-Degrees for RECS installation.
At this rate, I'll melt in mid-summer traffic.
I don't think you can use a hot breather Washer in the middle of summer traffic in Japan.
View detail
The length is perfect, but the size is too large.
I bought the 7/16 Washer here because Home center didn't have it. The diameter is perfect, but the Washer itself is larger than the size I wanted, so I had to return it. The return service was excellent.
It would be better if you know the outside diameter when you order.
This time it just didn't fit my use Pattern, but I thought the item itself was good. I'm sorry, Webig.
View detail
Fits: HARLEY-DAVIDSON Universal
Now
10year rion883 not fit...10 rion 883 does not fit. it was uncomfortable. Lack of explanation so sad ㅠㅠ Andksjscsiskdjsjskdsdjfksk View detail
Fits: HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON DYNAFamily
Not at all
How many times does it not fit? Does it go on as soon as you put it back on?
A defect! Bought it cheap, but you threw away the Gold? A product that just won't go on.
View detail
Fits: HARLEY-DAVIDSON Universal
Cheap and bastard
I originally used the Craftman Mirror, but I bought the StemMirror due to the Style change. NeoFACTORY products are hit or miss, but there are too many outliers. View detail
It broke down after a year.
I bought this one because the OEM was broken. It was good at first, but broke after a year. It had very little ride time and had only a few miles of use. I don't know if it's simply the quality of this product or if there are other reasons for the breakage of the regulator, but... View detail
It may not be suitable for a motorcycle with a large vibration threshold
I installed it in GSX1100S KATANA. 2 times touring (about 1000?) Because the bracket is very thin, it is a large piece of vibration It doesn't seem to be suitable for Motorcycle Volume and tone are normal Horn Horn should ring This is not a problem for those who are View detail
Defective design Lens melts and Valve burns
Three weeks are used, but now three weeks a week to ride, three weeks now, the inside of Lens melted Valve expired. Lens is beginning to melt for the other. Valve will close soon.
I like the shape very much because Size is Small, but there is no gap between Valve and Cover, so the plastic Lens is almost in contact with Valve. Heat comes out as 23 w balls, but it is not designed to miss that heat. It seems that Plastic Lens is sold separately because it knows that and sells it. Body other than Lens, because shape is good, because it is a Gold genus, I like the appearance. I will try to explore whether it can be used instead of an LED bulb.
View detail
Practicality is Limit
I used it in combination with PinGel's Adapter plate instead of PinGel..
When installing to the Adapter plate for PinGel, 1 / The precision of the 4NPT male thread is too low and installation is difficult without Brown difficulty. It is Zama who actually jams in once and breaks.
When installing, fix the adapter plate with vice. Just put the capped chemicals, put it in a way that wears the Tap back, you have to put it back, repeat the installation.
As it is probably impossible to use a Seal tape for leakage prevention, as for Sea Ring, I'd like to deal with Gasket on the Adapter side.
Author 's United States - If it is from Pauco company it will be a little more accurate...
View detail
Fits: HARLEY-DAVIDSON Universal
hard
The price is cheap and can be used normally, but it is hard compared to the famous Manufacturer's thing, so the handling was slightly Large strange when connected. Those who do not concern have no problem, but we can not Recommendation for people who do not care. View detail
Quality, correspondence is the worst
The shape is satisfied with Image.
However, the quality is not good.
At the time of installation, the Bolt part broke even though I was not applying the force at temporary stop Level yet. Spring washer is obviously insufficient in strength because it is broken by the tightening condition which is not crushed.
Moreover, in Manufacturer, breakage at the time of installation is not guaranteed and no correspondence.
After all, Wae Big was able to handle replacement, but it is the worst for Manufacturer's response.
View detail
It gets burned and the color falls..
For Excent pipe's appearance Accent and Protection to the part where the foot hits Vantage - I purchased Black.
It is satisfactory in terms of price, it is easy to buy because it is a selling price.
After arrival, I immediately wrapped it around the Exhaust pipe and there was nothing in the weeks,
When the time passed after 2 months - - Due to deterioration due to heat if you notice it
The color faded and the part which became White broke as the material itself became brittle.
After that, the part which faded was painted with heat-resistant paint and regenerated, and it became brittle
Parts are purchased again and rewound, in areas where legs etc. are particularly prone to deteriorate
Heat Guard and others are included to surpass it.
Because it is Reasonable in price, we recommend it for those who use it as a consumable item
, I think it would be better to avoid those who want to choose solid objects or nervous one.
View detail
Because Spring is solid - - -
I used it for the 2007 model XL 883 L.
I was trying to remove it, but I was unable to install Spring 's power too strongly.
I used Spring hook, but I gave up because I did not seem to have tried it many times.
After all it returned to the original Spring.
I attached the original Spring smoothly, but I do not know if there was hang in the installation.
View detail