Reviews
Fits: YAMAHA Remote controller jog, YAMAHA TOWN MATE, YAMAHA Box, YAMAHA VINO(2Cycle), YAMAHA JOG APRIO, YAMAHA JOG POCHE, YAMAHA YV50 Z II, YAMAHA Axis Treat, YAMAHA GRAND AXIS, YAMAHA CYGNUS X, HONDA DIO, SUZUKI VECSTAR150, SUZUKI VERDE, SUZUKI LETS4, SUZUKI LETS5, HONDA LEAD 100, HONDA LITTLE CUB, HONDA LIVE DIO, HONDA FREEWAY, HONDA Byte
Easy to replace. The quality is appropriate for the price. I think it will last for a long time.
I raped the Handlebar Grip of the LETS4 replacement.
Perhaps the grip texture is different from the NORMAL (OEM Product), but this product has a mussed texture. In that sense, it does not slip.
*Working time is 20 to 30 minutes
After chopping off the old Grip with Scissors, I cleaned the old Bond by scrubbing and wiping, sprayed Parts cleaner on the new Grip and tube, and inserted it all at once.
*You can start over.
The Axel side inevitably feels uneven when you hold it, but since it is not an OEM product, this is to be expected.
The rest are fine, a little on the Large size and sticking out.
View detail
Fits: SUZUKI GSX750 KATANA, SUZUKI GSX1100S KATANA (KATANA)
Good cost performance, but installation requires light modification
I think the quality for the price is good.
OEM moldings were also installed.
The mounting holes seem to be slightly misaligned with the BRKT, so small modifications such as making the holes long are necessary. It could be corrected by scraping with a round sandpaper.
View detail
Have been looking for it for a long time
Thank you webike for the prompt delivery!
The plastic is a little flimsy otherwise it fits well --------------------------------------- ------------------- Thank you webike for the prompt delivery! The plastic is a bit weak on the same way it fits well Powered by Google Translator
View detail
Is this how it is?
I was installing a Washer and bleed air with the specified Torque.
Oil came leaking from between the washers.
The packaging was good, as each piece was carefully packed.
The product was a waste of money for this.
View detail
The CBR250RR has an overhanging tank by design...
The CBR250RR has a large overhanging tank and is leaning forward, so it touches the knees or chest,
It is better to put it on as soon as possible before the gloss disappears. This product has a large surface area, so there is a lot of protection area. The surface is non-slippery, so the hold of the tank will be good.
View detail
Fits: HONDA NC750X, HONDA NC750S, HONDA NC700X, HONDA NC700S, HONDA CBR250R (MC17/19), HONDA CBR1000RR, HONDA CBR250RR (MC22), HONDA CB1000 SF (Big One), HONDA CB1300 SF, HONDA CB1300 SF, HONDA CB400SUPER BOLDOR, HONDA NC750S, HONDA CB400SUPER BOLDOR, HONDA CBR600RR, HONDA CBR600F, HONDA CBR600F, HONDA CBR400RR, HONDA CBR400RR, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CBR1000F
Same shape as OEMfootpegIt is easy to install.
OEM same etc. so installation is not a problem.
Shaft is a little longer than OEM.
The OEM is using split pins to prevent Shaft loss.
Purchased goods will be fixed by CGrip.
Is the shaft longer for easier CGrip installation?
I interpreted this as.
The quartz had a little BALI, but it was easily removed.
We also considered an aluminum footpeg, but decided to go with the OEM type because of the pain in the soles of the thin soles of the Sole.
The feel is the same as the OEM.
I am fully satisfied considering the price.
I would recommend it to anyone considering footpeg replacement.
View detail
Fits: HONDA APE50, HONDA APE100, HONDA BROS, HONDA CB-1, HONDA CB1000SF, HONDA CB1100, HONDA CB250T, HONDA CB400SF, HONDA CB400SS, HONDA CB500FOUR, HONDA CB750, HONDA CB125, HONDA CB125T, HONDA FTR223, HONDA GB250, HONDA HORNET, HONDA JADE, HONDA SL230, HONDA SPADA, HONDA VRX400
fully functional
I put on the Bikini cowl in the middle of winter and was hooked on the rectification.
When it got warmer and I took it off, it couldn't withstand the wind resistance.
Simple Type that does not spoil the Style is installed on a trial basis.
It is more effective than I thought, Bigli!
I'm satisfied
View detail
Fits: SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE250 burgman
Smoke Screen, a little better Parenthesis?
For the price, I think it is good.
The formation is inferior to OEM, but the GrommetScrew feels like a Limit stop and interfered a little with Cowl's Cover, so it was shaved off.
Up close. The molding is wavy at the mall, but this is still better as the OEM was dirty from the UV rays.
View detail
Fits: HONDA DIO DIO AF35, HONDA DIO DIO AF34
Exhaust System for AF34/35 with the best cost performance
2stExhaust System is a product that wears out faster than expected. "2000 AF34 71CC bore up version." Although we are using this one for the
This is the third time I have purchased this iNet Exhaust System, and it is a great match. The exhaust sound is quieter than the OEM product, the exhaust pressure is good, and when the Torque is applied, it really extends well. By the way, Intake is self-improved from NORMAL by 71CC bore up, and it marks 84km/h on flat road, 78km/h up road, and 94km/h down road by using Eye Net Exhaust System.
Of course, it is not only the performance of the Exhaust System, but it is a product that can demonstrate sufficient Potential compared to other companies' products.
Moreover, the cost performance is the best, and we can't use a bad, expensive Chamber, because it is a consumable product. Therefore, I Net products are the best in terms of cost performance, so I have decided to replace the exhaust system.
It's really helpful because I can replace it without hesitation. 。 We intend to use it in the future.
The following are some of the improvements that could be made in terms of design.
(1) Stainless Steel decorative winding is not necessary (it's contrary and tacky), Black or Color.:One solid coat of Gray is fine.
As a decoration of Exhaust System ai net I think it would be cool if there was a heat-resistant PlateLogo.
I hope you will go ahead with branding because the product is good.
View detail
Fits: YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-10, YAMAHA MT-03, YAMAHA MT-125
Rose variation in quality is expected.
Mounting BoltMirror Bracket has been hammered in, but it is not completely hammered in, and even when the nut is tightened, about 1mm of bolt is visible on the top of the nut, which is not good looking.
Rose variation in quality is expected.
I would like to return it, but I have opened and installed it and it is Garbage.
View detail
Fits: KAWASAKI W650, KAWASAKI ZRX400II, KAWASAKI ZR-7/S, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR400, KAWASAKI BALIUS, KAWASAKI BALIUS2
Will not pass inspection.
After installing this Headlight, I went to testCenter to adjust the optical axis.
Two irradiated points, one with a huddled area and the other with a blurry area.
I was told that I could not inspect the car.
View detail
Fits: SUZUKI Address V100, SUZUKI ADDRESS V100
ai-net Secondary Air Pipe available Spec. OEM Type Exhaust System
Replacing the OEM made it lighter and sounded more like a 2-stroke.
We are not sure how long OEMChamber will last, and we have a motive to purchase it while we can.
Performance-wise, it is not that different from the OEM, but I am satisfied with the lighter weight and the more Chamber-like appearance.
The fixing bolt holes were correctly positioned with no gaps, and there is a secondary air pipe for the Second Type Model CE13A, so installation was no problem.
The fact that Gasket is included is also appreciated in a humble way.
View detail
Everything you need
This is everything you need for a tail light on the monkey z50j. Grab bar comes in handy when needing to move the bike around and the light is bright. View detail
Convenient
[How is it used?
Rear boxB27N was attached and used.
There are no functional problems at all.
Was the one you received as per Image?
As per Image
I also liked that the length of the bike made the impression of a motorcycle a little more "large".
Was the installation difficult?
I was able to install and use it myself at the same time I purchased the VTR. It is not difficult at all.
Attaching the GIVIMonokey base is also no problem.
How was your experience with it?
I use it with a box, but it is also convenient for loading without a box.
It is the same height as the Seat, not tiered, and the Carrier is long enough to pack a lot.
[Included Parts:were they on?
Collars (thicker Washers) are included and are interchangeable with OEM collars.
[Was there anything that disappointed you?
There is a Tandem grip part, but it is thin and difficult to hold.
Paint film tends to peel off easily (especially at Bolt attachment points).
It is disappointing to see rust progressing from where the paint has peeled off.
[Opinions and requests to Manufacturer
I would like the Tube in the Tandem grip section to be thicker.
I would like to see the painting improved.
View detail
They run away in the middle of the night.
About once a month, a gang of thieves comes in, sets off an alarm, and runs away. View detail
Fits: HONDA NC750X, HONDA NC750S, HONDA NC700X, HONDA NC700S, HONDA CBR250R (MC17/19), HONDA CBR1000RR, HONDA CBR250RR (MC22), HONDA CB1000 SF (Big One), HONDA CB1300 SF, HONDA CB1300 SF, HONDA CB400SUPER BOLDOR, HONDA NC750S, HONDA CB400SUPER BOLDOR, HONDA CBR600RR, HONDA CBR600F, HONDA CBR600F, HONDA CBR400RR, HONDA CBR400RR, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CBR1000F
No different from OEM Product
Until the actual product arrived, I was worried about what it would look like, but I was relieved.
Although there are some rough processing parts, the price is lower than OEM products.
It will hardly make any difference, and I don't think you will notice that it has been replaced.
View detail
Rose sales are helpful.
As the Title says, Rose selling is good, and it really helped me to choose the Ampere I wanted.
Netetc. sales, I was able to buy only the Ampere I needed for my Motorcycle this time, and the Ampere I didn't need was only cheap in Large quantity.
View detail
It is soft.
It is quite soft and I used it for serving bean jam, but when I sat on it, it was crushed and did not make the seat height UP. View detail
Fits: SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle)
Is it not higher performance than OEM Product?
I love my 2-stroke carburetor scooter, and I clean it every 10,000 km with a pipe fnish because clogging of the exhaust system is inevitable. But I replaced the exhaust system because it was reaching the end of its service life. The Exhaust System in question is Quantity:The design of the exhaust guard has been changed for a better look. The installation is perfect with no gap at all at the bolt holes. View detail
Fits: KAWASAKI KLX150, KAWASAKI KL250, HONDA XR250, HONDA XR200, HONDA XLX250, Others , SCORPA T-RIDE 250F, YAMAHA CT175, SUZUKI SX200, KAWASAKI 250TR Bison, HONDA XLR200, HONDA MTX200R/RII, HONDA CRF150R, HONDA CRM250AR, HONDA SL230, HONDA FMX650, HONDA CRM250R, HONDA XLR250, HONDA XL-DEGREE, HONDA XR230
The pattern is cool, but …
[How is it used?
Seat was torn and I bought it as a Replace.
Was the one you received as per Image?
The Pattern was cool, WaterproofSeat was included, and I was happy with it when it arrived.
Was the installation difficult?
Installation, but due to Seat's material, it could not be installed without stretching and wrinkling.
You can attach Wrinkle by blinding it.
How was your experience with it?
Since it is used for off-road driving, it has Wrinkle and no Grip, so I gave up using it.
However, it looks Parenthesis good.
[Included Parts:were they on?
It comes with a WaterproofSeat, which is used in conjunction with another Seat.
[Was there anything that disappointed you?
As I said, there was no growth, so that was disappointing.
View detail