Reviews
Fits: HONDA gyro canopy, YAMAHA TMAX500, YAMAHA TW225E, YAMAHA JOG (2Cycle), YAMAHA XG250 TRICKER, Others , YAMAHA MAJESTY125, YAMAHA MAJESTY125, YAMAHA JOG, YAMAHA CYGNUS X, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER Big Boy, SUZUKI RV200 VANVAN, SUZUKI 250SB, KAWASAKI ESTRELLA, KAWASAKI KLX250ES, KAWASAKI KLX250, KAWASAKI D Tracker, KAWASAKI 250TR, HONDA MONKEY
Installation is still, but I think that it is good for appearance.
I wanted to manage Tachometer absence and Tank capacity of D tiger's biggest fault shortcomings,
Always cautically severe, I almost gave up.
With looking for Yome NINJA's Parts, I had discovered this Tachometer if I saw the Sale items this time.
It's affordable even if you look at the price, it feels good in Analog. I thought and purchased it.
A few days after ordering, goods arrived. Open the box, first "There is no such manual" I did Big Ri on this. Since I do not know Wiring, I confirmed it with Net, but even if it is easy, I think I want you to attach a Wiring diagram.
(Personally it is Minus point).
Wiring out from Meter is too short. I bought Bullet Terminal and a code and extended it.
(Is it because the price is cheap?
Appearance etc. It is as I imagined, Parenthesis is nice.
I want to add it sooner. I'm excited..
Not installed yet this time - Since it is unused, I do not know yet in terms of performance, "Installation accuracy" When "Cospa" Has not been evaluated.
View detail
I am saved..
Where do you get tired when you go to Touring?
I think it depends on Position but in my case it was "Osiri".
Yes, it is past tense.
From the best to the worst in the improvement of Seat, I think that it is from the maximum amount to the minimum amount.
Personally, I think "COSPER = effect versus cost" is necessary.
When examining various things, we will send Seat from the simplified product to be mounted on Seat and process it ... There are also various countermeasures.
We can respond by inexpensive way that we can process even by ourselves.
It's already Seat more than 30 years ago, but it's not difficult at all.
The necessary tools are Tucker and Scissors.
Osiri does not hurt so I think it is effective.
View detail
Fits: KAWASAKI 1000GTR, KAWASAKI 1400GTR, KAWASAKI GPZ400R, KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI Z1000 (air-cooled), KAWASAKI ZX-12R, KAWASAKI ZX-9R, KAWASAKI ZZR1200, KAWASAKI ZZR250, KAWASAKI ZZR400, KAWASAKI ZZR600, KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR1100/ZX-11, KAWASAKI ZRX400, KAWASAKI ZRX400II, KAWASAKI ZRX1200S, KAWASAKI ZRX1200R, KAWASAKI ZRX1100, KAWASAKI ZRX1100II
Choose an OEM
The width of the attachment part is wide, it does not enter as it is and it does not move. By the way, since the pin hole is not perpendicular to the face, Pin does not pass even if it is cut until it enters Limit (Lol)
Also, the pin hole of NINJA 2 Helmet 50 OEM footpeg is beautiful whether the Reamer is passing though, but the roughness of the pin hole surface of this product is bad. Perhaps with a sharp bad Drill.
After that, compared with OEM, footpeg's Rubber is fixed with Rivet so it is not possible to exchange Minus.
Up to this point there are only useless places, but the good point is that the attached Pin is hollow so it gets a little lighter (Lol)
Since the rest is Rubberfootpeg, the vibration was alleviated, and the pain of the sole was also alleviated.
However, since footpeg of NINJA 2 Helmet 50 REMEM does not change much like Gold amount, I will recommend it there.
View detail
Cospa is good
I also made a solid, running a thousand kilometers, but no problems at all.
Next time will also purchase.
Regarding performance, evaluation is difficult, but I think that it is enough.
View detail
Fits: HONDA CBR250R (MC17/19), HONDA NC700S, HONDA NC700X, HONDA NC750S, HONDA NC750X, HONDA fusion, HONDA fusion, YAMAHA Cygnus X, YAMAHA Cygnus X SR, YAMAHA SMAX, YAMAHA MAJESTYS, YAMAHA MAJESTY125, YAMAHA MAJESTY125, SUZUKI GSX400, SUZUKI RF400, SUZUKI GSX400, HONDA VALKYRIE, HONDA VALKYRIE, HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA)
Very satisfied with the customer service and the delivery times. Estimated delivery time are very accurate. Will take around a week to get the product to Sri Lanka. Best brake pad I have ever use great feel and good stopping power. Break feel and easy
Very satisfied with the customer service and the delivery times. Estimated delivery time are very accurate. Will take around a week to get the product to Sri Lanka. Best brake pad I have ever use great feel and good stopping power. Break feel and easy to modulate are the best features of this pad. *I haven't used pad more expensive than this. So my opinion are base on that. Bike is 91 JADE 250 mc23 View detail
Fits: HONDA FUSION, HONDA FUSION, HONDA Helix Model 1, HONDA Helix Model 2, HONDA FUSION
thanks for the great seat and also the Repeat Customer Appreciation Point.Books were awesome also.have to translate a lot ot it.
thanks for the great seat and also the Repeat Customer Appreciation Point.Books were awesome also.have to translate a lot ot it. View detail
Fits: HONDA XLR250, HONDA XLR250, HONDA XLR250, HONDA XLR250, HONDA XLR250, HONDA XLR250, HONDA XLR250, HONDA XLR250, HONDA XLR250, HONDA XLR250, HONDA XLR250, HONDA XLR250, HONDA XR600, HONDA XR600, HONDA XR600, HONDA XR600, HONDA XR600, HONDA XR400R, HONDA XR400R, HONDA XR400R
I forcibly.
I thought that it was wet to dry, I bought it by saying OEM Corresponding Parts of the text, but it was too thick to push in with a quite forceful feeling did not enter. A little Air cleaner Body bent. Model is XLR 250RL. Well, I think that there is no problem, but please be aware of those who make a purchase. I think that OEM or other company's products can be relieved. Once the PL guarantee comes with it though. View detail
Fits: SUZUKI GN125, SUZUKI sepia, YAMAHA ZEAL, YAMAHA Tricity155, HONDA SUPER DIO, HONDA ZOOMER, HONDA ZOOMERX, HONDA SPACY100, HONDA SPACY125, HONDA DIO110, HONDA TODAY, HONDA Byte, HONDA FAZE, HONDA FORESIGHT, HONDA FUSION, HONDA FREEWAY, HONDA HORNET250, HONDA MAGNA(V-TWIN MAGNA), HONDA LIVE DIO, HONDA LEAD 100
Convenient!
I like White and I also include Full face so I decided this! It is quite light, but it is Chatty, but if it is everyday use such as SUPER's side dish. It takes less than 1 hour to install. Some carriers interfere and Bolt does not work well, so I bought a short on Home center. Instruction Manual It is easy without changing Bolt in inside although it was awkward a little when changing from Red Stee to Black without it. View detail
Fits: HONDA fusion, HONDA FUSION, HONDA FUSION, HONDA FUSION, HONDA FUSION
Depending on your way of thinking
I bought it for Shield exchange of FUSION.
Mirror part mounting hole is
Gap is better if you do not open it from the very beginning.
If it is not open, Drill will solve one problem
Correction is troublesome because it is in a position that is not well behaved.
There is no point which is distorted by distortion condition, it is enough to pass.
Hardness to wound is still unknown
For this price you can change it every two years.
I think Cost performance is good..
I am satisfied overall
View detail
Fits: HONDA CB1100, HONDA CB1100, HONDA CBR600F, HONDA CB1300 SF, HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR, HONDA CB400SF, HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA CB400SUPER BOLDOR, HONDA CBR600RR, HONDA CBR600F, HONDA CB400SUPER BOLDOR, HONDA CBR929RRFire blade, HONDA CBR900RRFire blade, HONDA CBR954RRFire blade, HONDA VTR1000SP, HONDA HORNET600
It worked fine
When I replaced the OEM Brake Pads with the NTBPad, I had a lot of noise in the winter I replaced it with a Pad
I've been using this Pad for commuting and touring, but I haven't had any trouble with it, and it's time to move on It's time to replace it and I'm going to buy it again
View detail
Fits: HONDA CB1100, HONDA CB1100, HONDA CBR600F, HONDA CB1300 SF, HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR, HONDA CB400SF, HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA CB400SUPER BOLDOR, HONDA CBR600RR, HONDA CBR600F, HONDA CB400SUPER BOLDOR, HONDA CBR929RRFire blade, HONDA CBR900RRFire blade, HONDA CBR954RRFire blade, HONDA VTR1000SP, HONDA HORNET600
Feeling good as OEM
I have only been using it for a while yet but I feel as good as OEM so far so far.
OEM remained in the remaining groove 1, so the initial effect became worse so I replaced it but the effect returned.
I do not know what will happen if I use it, but I do not get bad suddenly so I think this is the correct answer.
I want a color!
So I painted it with Red of the remaining heat resistant Caliper paint used in the car.
View detail
Anko is thin but acceptable range
It was purchased because it was simply cheap.
I had anticipated with the image, but Anco is thin and it is not suitable for long distance.
I myself will not run so long so it's not a problem.
Accuracy is adequate tolerance. I can not go briskly but I was not troubled by the installation.
It may vary depending on lot, but synthetic leather is slightly thin and dry Vinyl
It seems that it seems like it will be torn in two or three years if it is parked in Blue sky.
In any case, because the durability of OEMLevel can not be expected, keep Bike Cover storage
I will recommend it..
View detail
Fits: HONDA NC750X, HONDA NC750S, HONDA NC700X, HONDA NC700S, HONDA CBR250R (MC17/19), HONDA CBR1000RR, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSR600, SUZUKI GSR400, HONDA CBR250RR (MC22), HONDA CB1000 SF (Big One), HONDA CB1300 SF, HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF
Easy installation!
I bent the Normal step and checked the OEM Parts Number, so it was quite a good price
If you look for Wae Big, get to this item, Standard Type and Wide (Wide) Type
I bought two kinds.
Quantity : Even if you buy 2 Set, we will put it as a spare as it is about the price of OEM One Side.
This time Wide Type (Wide) I installed it, but for me in Touring Main
I feel that this one has a sense of stability.
It was very easy to install because it was about one minute for One Side!
Shaft - Spring - ClipPin reused OEM Product, so the attached parts were spare.
View detail
Excellent excellent item in COSPA
There is only one dissatisfaction at this stage.
Exhaust port part is getting somewhat red. But I wonder if there is a problem if I maintain it with consciousness?
I do not mind that the volume is Large.
It is necessary to devise Bracket in order to attach it to CUB, but it is not a level called processing.
View detail
Fits: HONDA CBX125, HONDA MAGNA50, HONDA REBEL(-1999), SUZUKI RV200 VANVAN, YAMAHA TW225E, YAMAHA DRAGSTAR250, SUZUKI DESPELADO, HONDA 250T, HONDA CB400SS, HONDA CD125, HONDA PS250, HONDA JAZZ, HONDA CB400T CB250T, KAWASAKI 250TR, KAWASAKI ESTRELLA, SUZUKI GRASS TRACKER, SUZUKI VOLTY, YAMAHA YB-1, YAMAHA VIRAGO250(XV250), Others
Clear flow effect as it is
When I traveled on a highway with ETC attached, I installed it because there was a lot of wind pressure.
It's not so difficult to fix it to the Handlebar.
Impression that I wore and traveled on a highway obstructed the wind from the chest to the neck so it became a little easier.
As a problem, I think that the gold tool is easy to rust so I can Plating it.
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3, YAMAHA YZF-R3, YAMAHA YZF-R25
Cheap and bad
Speaking of Inner fender, Carbon thought it was a pair, but it was Painted's Inner fender, so it was an unusual kind of purchase. The first impression I received was that the Material, the paint was cheapish. While feeling a bit uneasy, try installing ... ... in anxious way!
First of all, the gap between Tire and Fender is too wide! Because we attached other Manufacturer's Inner fender to Motorcycle other than R25, I was amazed at the inferior gap of the Inner fender for R25 that arrived! Close to the inexplicable thing saying why you need such a gap, why are you doing the same up and down? ... And, more than anything, Parenthesis of the moment you saw with Back shot! It is distorted and distorted! Although it is a Tire house, even though it is a Tire house, Not being shaped along! It's not good to cover the Tire!
Considering the price I thought it was a predictable situation and it became high shopping! Inner
View detail
I'm very happy with the appearance and quality of this windshield. I was a bit skeptical because of the low price but I am glad I took the chance and purchased it. Fit was good but I did have to flex it slightly to install the mounting screws. Once instal
I'm very happy with the appearance and quality of this windshield. I was a bit skeptical because of the low price but I am glad I took the chance and purchased it. Fit was good but I did have to flex it slightly to install the mounting screws. Once installed it looks great and the dark tint matches my custom paint nicely. I couldn't believe shipping only took 2 or 3 days to Cincinnati. I'm so glad I found this website and will definitely be making more purchases in the future. View detail
Crime prevention measures Appeal
Building is strong Plastic.
Rubber is set in the place to contact Grip. There are kinds of this Rubber, and you can replace them with things that match according to the thickness of Grip.
I chose Yellow color.
Brighter colors stand out, so you can do Appeal for crime prevention.
It helps crime prevention measures at Touring destination.
I think that this product is not a thing to use on a daily basis.
Since Brake will always be in a state of being held, it will be until about a whole day, such as at night that departs from Motorcycle.
Brake Load on the hydraulic system will be a cause of failure. I think that it is better to stop for a long time.
If you understand even that, it is appreciated the existence of items that can be cheap enough to handle crime prevention measures.
View detail
Fits: SUZUKI GSX750 KATANA, SUZUKI GSX1100S KATANA (KATANA)
Is the position of our Bracket different?
Quantity : Pair (for Left and Right) Screw was not attached unless the hole width was narrow and pulled.
However, since such things are not applied to Impression of other people, our Bracket's position may be different.
Anyway, anyway (When purchasing) I think that it is cheap and the shape is not incongruous.
Smoke is deeper than OEM.
The section is beautifully cut..
View detail
Fits: Others Compatible with Hose inner diameter of 8mm.
Gasoline leaks
Gasoline leaks from the Joint section.
I think that Packing is bad - -
Well, recently when you buy unvalued items, it's just Ha Gap..
View detail