Reviews
Fits: SUZUKI GSX750 KATANA, SUZUKI GSX1100S KATANA (KATANA)
Cool ?
The cosmetics are very good and look very nice. View detail
To repair the Motorcycle seat anchorage & seating!
Since I have repainted several Motorcycle Seat fabrics, I thought I would try to do the same for the inside of the Seat! I decided to take on this challenge. The result was Large satisfaction! This sponge is really easy to work with (easy to cut with scissors), so you can easily use it for anchoring and repairing scraped (rotten) Seat sponge! I had some left over and used it to repair the sponge on a worn out seat chair that I love, and it worked fine too! The price is cheap and I will replace this sponge every year from now on! View detail
Fits: HONDA VFR750, HONDA VFR800, HONDA VTR250, HONDA VTR1000 SP-1 RC51, HONDA NSR250R SE, HONDA NSR250R, HONDA NSR250 MC18 MC21, HONDA CBR250 MC19 MC22
cheap and has a bad finish
I bought ai-net fuel tank cap to replace the old cap that was damaged. The new ai-net cap is cheap and has a bad finish. The new tank cap is raised higher with the fuel tank. View detail
Fits: HONDA XLX250, HONDA XR200, HONDA XR250, KAWASAKI KL250, KAWASAKI KLX150, SUZUKI DF200, SUZUKI SX200, SCORPA T-RIDE 250F, HONDA CRF150R, HONDA CRM250AR, HONDA CRM250R, HONDA FMX650, HONDA SL230, HONDA XR250 BAJA, HONDA XLR250, HONDA XL-DEGREE, HONDA XR230, KAWASAKI KL250, KAWASAKI D Tracker, HONDA XR250
I appreciate the affordable price.
[How is it used?
The KDX220 I purchased used was not in bad condition for an old vehicle from the 1990s, but the seat cover was in a slippery condition because the surface had begun to harden, probably because it was from that era.
On the way home after taking delivery of the car at Motorcycle shop, my buttocks moved back and forth every time I accelerated or decelerated, making it very difficult to enjoy the ride, and as soon as I started driving. The first custom was to reupholster the Seat Cover. It was like that.
Originally, I was going to bLOOVE it, including a look at the vehicle, but I went home right away and looked at Webike's product introduction section. KDX220 Seat I've been searching for...
Since it is an old vehicle, there are not many choices, but I-Net's Off-road Vehicle UniversalSeat Cover was a hit, and the price is low! If by some chance I fail, I'm ready to give up." So I bought it
How did you like it?
As a universal product, it is not as good as the Seat fabric made by a three-dimensional manufacturing process for each car model, but I personally think that the KDX Seat itself is not a complicated shape, so I was able to stretch it well.
The new fabric is highly flexible and the dimpled finish gives it a high grip, so you can enjoy riding without being carried back and forth every time you accelerate or decelerate.
To be honest, I wanted to stick with the OEMSeat Cover, but after looking at the price, the thickness of the fabric, and the condition of the finished product, I felt this product was sufficient.
How did it compare to other products?
There are few choices in terms of car models to begin with, and other products are expensive and have stopper belts sewn into the seat surface. I mean it!" I couldn't choose one because I had a strong feeling that it would be embarrassing to me, as I have poor driving skills.
What points should I pay attention to?
Patience and ingenuity are required because the products are not three-dimensionally sewn for car models.
If the tucker is driven in too shallow, there is a risk that the fabric will break from the tucker.
Front and back of the Seat are loosely secured to the Quantity:Pair (for Left and Right) When pasting the "Beauty" sponge, it should be pasted along the "Seat sponge" without wrinkles to make it beautiful.
Other items that would be helpful
The deciding factor in the purchase
The only Seat fabric that was safe for normal use was sold only by iNet.
We were not able to confirm that the products were made by KawasakiOEM, so we did not consider them in this case.
[How is it used?
Basically, it's Main for city driving. I can't even use SEROW, so it was too Hurdle for me to play in the mountains with a 2CycleEngine equipped car.
【Included Parts:presence or absence】.
Seat CoverQuantity:1pc. with Instruction Manual and Vinyl for waterproof.:Set
Tandem belt is not included, so those who need it must purchase it separately or reuse the OEMBelt.
[ITEMS TO BUY TOGETHER
Seat fabric to fasten to Seat Base seat. Tucker. and short-legged core.
It may not be necessary for those who apply Vinyl underneath, but for those who apply directly to Sponge without Vinyl, it is better to prepare SiliconCoking agent to be applied to the reverse side seam of the Seat fabric.
Opinions and requests to Manufacturer.
Although it may not be a problem for popular cars, it is a product that older cars and minors cannot do without, so we hope you will continue to sell Lineup for a long time.
View detail
I used it on Cushion for a chair.
This is the third time I have used this Seat sponge.
At first I used it to improve the OEMSeat of the Initial Model Grom, which was a pain in the buttocks.
Reference https://imp.webike.net/diary/205834/
The second one. Torture Seat" The Seat of KLX125 (Initial Model) was used to convert the Seat to a wider Seat. It took a lot of time and effort, but the result was satisfactory.
This is https://imp.webike.net/diary/205834/I showed how to do it in
The third time I used it to improve Cushion for chairs.
The Cushion for home use has a very soft and thin Sponge, so it quickly becomes floppy.
Therefore, we decided to substitute the Sponge with this product, which is a urethane product for motorcycles.
First, take out the Sponge inside from the Cushion.
Shape the eyeNetSponge to that same shape.
Cutter knives are often used to cut urethane sponge, but it is always hang to use new ones. If the teeth become even slightly rounded, the sharpness will deteriorate.
This time I cut it with Large type scissors because it is thin.
Two sheets were not enough, so I also used leftover eyeNetSponge that I had saved.
Bond is used to attach eyeNetSponge.
When the shape is the same as the original Sponge, place it in Cover to complete the process.
Feeling of use
Hmm? Better, but still not good enough.
Songe lacks thickness.
A thickness of 2 cm does not seem to be sufficient to create a comfortable seat that wraps around the buttocks.
If the thickness is 4 cm, the seating comfort would be satisfactory.
View detail
Fits: HONDA VFR750, HONDA VFR800, HONDA VTR250, HONDA VTR1000 SP-1 RC51, HONDA NSR250R SE, HONDA NSR250R, HONDA NSR250 MC18 MC21, HONDA CBR250 MC19 MC22
Bad accuracy
Purchased as a replacement for a Gasoline leak from an OEM cap.
The installation itself is completed quickly with three Bolts.
The lid was slightly lifted, but since it was an Other Brand Product, we thought it was inevitable.
However, once the lid is opened, it is so inaccurate in its construction that no matter how hard it is pushed in, it will not lock and the key will not pull out.
Rubber packing was the same shape as OEM, so I used it to replace the OEM cap. The Gasoline leak was fixed.
It would be good to use it as a parts holder for Packing to be used for OEM, but it is not cosy to pay almost 4,000 yen just for Packing.
View detail
Let's just call it RepairMaterial.
Used for OEMSeat Repair.
Seat is back to normal.
It doesn't have the performance to reduce buttock pain, but it does have the performance to reduce buttock pain.
I am satisfied with the hold feeling and as a repair material,
View detail
Fits: BMW R nineT Scrambler, BMW R nineT Racer, BMW R nineT Pure, BMW R nineT
I think it needs to be improved!
After touring (about 5-6 hours), when I was wiping it dry, I found the pad peeling off, which seems to be due to the adhesive sticking to the tank and the peeling between the pad and the adhesive. View detail
Fits: HONDA APE50, HONDA APE100, HONDA BROS, HONDA CB-1, HONDA CB1000SF, HONDA CB1100, HONDA CB250T, HONDA CB400SF, HONDA CB400SS, HONDA CB500FOUR, HONDA CB750, HONDA CB125, HONDA CB125T, HONDA FTR223, HONDA GB250, HONDA HORNET, HONDA JADE, HONDA SL230, HONDA SPADA, HONDA VRX400
the screen is good
I like that the clear screen is clean.
It bends well too.
It's nice that it's easy to install.
However, the screen cracks over time.
I don't know why.
However, the price is cheap so I can forgive it.
I hope the screen is not broken -------------------------------------------- --------------- The clear screen is clean. It is also good to bend. It is also easy to install. However, after time, the screen splits. I don't know why. But the price is cheap and you can forgive. I hope the screen won't break Powered by Google Translator
View detail
Expectations for Waterproofness
I bought this as a Vinyl to put inside the Seat because the Seat absorbs water in the rain.
Not yet available as it requires Air Tuckeretc.
I pre-purchased the product because it is inexpensive.
I hope the water stops sucking in….
View detail
It won't come off.
I used to use another manufacturer, but the adhesion was weak and it came off in the summer heat, but this did not happen at all.
In addition to that, the wind pressure from the Air blow is not a problem at all.
It is very stylish as it is an Exclusive Design of the car model.
Body color was black 400X.
View detail
Fits: SUZUKI GSX750 KATANA, SUZUKI GSX1100S KATANA (KATANA)
KATANA Screen
No particular problems. Cospa is good. View detail
I haven't used it yet, but I like the design
The previous one was World Walk's g2 tank pad, I'm satisfied with its texture and function, but the rubber is soft and is breaking down quickly, so I bought it as a replacement in advance It is thought that the design is sleek and more durable than the g2. I am satisfied View detail
Fits: SUZUKI GSX750 KATANA, SUZUKI GSX1100S KATANA (KATANA)
Good cost performance, but installation requires light modification
I think the quality for the price is good.
OEM moldings were also installed.
The mounting holes seem to be slightly misaligned with the BRKT, so small modifications such as making the holes long are necessary. It could be corrected by scraping with a round sandpaper.
View detail
The CBR250RR has an overhanging tank by design...
The CBR250RR has a large overhanging tank and is leaning forward, so it touches the knees or chest,
It is better to put it on as soon as possible before the gloss disappears. This product has a large surface area, so there is a lot of protection area. The surface is non-slippery, so the hold of the tank will be good.
View detail
Fits: HONDA APE50, HONDA APE100, HONDA BROS, HONDA CB-1, HONDA CB1000SF, HONDA CB1100, HONDA CB250T, HONDA CB400SF, HONDA CB400SS, HONDA CB500FOUR, HONDA CB750, HONDA CB125, HONDA CB125T, HONDA FTR223, HONDA GB250, HONDA HORNET, HONDA JADE, HONDA SL230, HONDA SPADA, HONDA VRX400
fully functional
I put on the Bikini cowl in the middle of winter and was hooked on the rectification.
When it got warmer and I took it off, it couldn't withstand the wind resistance.
Simple Type that does not spoil the Style is installed on a trial basis.
It is more effective than I thought, Bigli!
I'm satisfied
View detail
Fits: SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE250 burgman
Smoke Screen, a little better Parenthesis?
For the price, I think it is good.
The formation is inferior to OEM, but the GrommetScrew feels like a Limit stop and interfered a little with Cowl's Cover, so it was shaved off.
Up close. The molding is wavy at the mall, but this is still better as the OEM was dirty from the UV rays.
View detail
Everything you need
This is everything you need for a tail light on the monkey z50j. Grab bar comes in handy when needing to move the bike around and the light is bright. View detail
Convenient
[How is it used?
Rear boxB27N was attached and used.
There are no functional problems at all.
Was the one you received as per Image?
As per Image
I also liked that the length of the bike made the impression of a motorcycle a little more "large".
Was the installation difficult?
I was able to install and use it myself at the same time I purchased the VTR. It is not difficult at all.
Attaching the GIVIMonokey base is also no problem.
How was your experience with it?
I use it with a box, but it is also convenient for loading without a box.
It is the same height as the Seat, not tiered, and the Carrier is long enough to pack a lot.
[Included Parts:were they on?
Collars (thicker Washers) are included and are interchangeable with OEM collars.
[Was there anything that disappointed you?
There is a Tandem grip part, but it is thin and difficult to hold.
Paint film tends to peel off easily (especially at Bolt attachment points).
It is disappointing to see rust progressing from where the paint has peeled off.
[Opinions and requests to Manufacturer
I would like the Tube in the Tandem grip section to be thicker.
I would like to see the painting improved.
View detail
It is soft.
It is quite soft and I used it for serving bean jam, but when I sat on it, it was crushed and did not make the seat height UP. View detail