Reviews
Fits: SUZUKI GSX750 KATANA, SUZUKI GSX1100S KATANA (KATANA)
Cool ?
The cosmetics are very good and look very nice. View detail
Fits: HONDA XLX250, HONDA XR200, HONDA XR250, KAWASAKI KL250, KAWASAKI KLX150, SUZUKI DF200, SUZUKI SX200, SCORPA T-RIDE 250F, HONDA CRF150R, HONDA CRM250AR, HONDA CRM250R, HONDA FMX650, HONDA SL230, HONDA XR250 BAJA, HONDA XLR250, HONDA XL-DEGREE, HONDA XR230, KAWASAKI KL250, KAWASAKI D Tracker, HONDA XR250
I appreciate the affordable price.
[How is it used?
The KDX220 I purchased used was not in bad condition for an old vehicle from the 1990s, but the seat cover was in a slippery condition because the surface had begun to harden, probably because it was from that era.
On the way home after taking delivery of the car at Motorcycle shop, my buttocks moved back and forth every time I accelerated or decelerated, making it very difficult to enjoy the ride, and as soon as I started driving. The first custom was to reupholster the Seat Cover. It was like that.
Originally, I was going to bLOOVE it, including a look at the vehicle, but I went home right away and looked at Webike's product introduction section. KDX220 Seat I've been searching for...
Since it is an old vehicle, there are not many choices, but I-Net's Off-road Vehicle UniversalSeat Cover was a hit, and the price is low! If by some chance I fail, I'm ready to give up." So I bought it
How did you like it?
As a universal product, it is not as good as the Seat fabric made by a three-dimensional manufacturing process for each car model, but I personally think that the KDX Seat itself is not a complicated shape, so I was able to stretch it well.
The new fabric is highly flexible and the dimpled finish gives it a high grip, so you can enjoy riding without being carried back and forth every time you accelerate or decelerate.
To be honest, I wanted to stick with the OEMSeat Cover, but after looking at the price, the thickness of the fabric, and the condition of the finished product, I felt this product was sufficient.
How did it compare to other products?
There are few choices in terms of car models to begin with, and other products are expensive and have stopper belts sewn into the seat surface. I mean it!" I couldn't choose one because I had a strong feeling that it would be embarrassing to me, as I have poor driving skills.
What points should I pay attention to?
Patience and ingenuity are required because the products are not three-dimensionally sewn for car models.
If the tucker is driven in too shallow, there is a risk that the fabric will break from the tucker.
Front and back of the Seat are loosely secured to the Quantity:Pair (for Left and Right) When pasting the "Beauty" sponge, it should be pasted along the "Seat sponge" without wrinkles to make it beautiful.
Other items that would be helpful
The deciding factor in the purchase
The only Seat fabric that was safe for normal use was sold only by iNet.
We were not able to confirm that the products were made by KawasakiOEM, so we did not consider them in this case.
[How is it used?
Basically, it's Main for city driving. I can't even use SEROW, so it was too Hurdle for me to play in the mountains with a 2CycleEngine equipped car.
【Included Parts:presence or absence】.
Seat CoverQuantity:1pc. with Instruction Manual and Vinyl for waterproof.:Set
Tandem belt is not included, so those who need it must purchase it separately or reuse the OEMBelt.
[ITEMS TO BUY TOGETHER
Seat fabric to fasten to Seat Base seat. Tucker. and short-legged core.
It may not be necessary for those who apply Vinyl underneath, but for those who apply directly to Sponge without Vinyl, it is better to prepare SiliconCoking agent to be applied to the reverse side seam of the Seat fabric.
Opinions and requests to Manufacturer.
Although it may not be a problem for popular cars, it is a product that older cars and minors cannot do without, so we hope you will continue to sell Lineup for a long time.
View detail
I used it on Cushion for a chair.
This is the third time I have used this Seat sponge.
At first I used it to improve the OEMSeat of the Initial Model Grom, which was a pain in the buttocks.
Reference https://imp.webike.net/diary/205834/
The second one. Torture Seat" The Seat of KLX125 (Initial Model) was used to convert the Seat to a wider Seat. It took a lot of time and effort, but the result was satisfactory.
This is https://imp.webike.net/diary/205834/I showed how to do it in
The third time I used it to improve Cushion for chairs.
The Cushion for home use has a very soft and thin Sponge, so it quickly becomes floppy.
Therefore, we decided to substitute the Sponge with this product, which is a urethane product for motorcycles.
First, take out the Sponge inside from the Cushion.
Shape the eyeNetSponge to that same shape.
Cutter knives are often used to cut urethane sponge, but it is always hang to use new ones. If the teeth become even slightly rounded, the sharpness will deteriorate.
This time I cut it with Large type scissors because it is thin.
Two sheets were not enough, so I also used leftover eyeNetSponge that I had saved.
Bond is used to attach eyeNetSponge.
When the shape is the same as the original Sponge, place it in Cover to complete the process.
Feeling of use
Hmm? Better, but still not good enough.
Songe lacks thickness.
A thickness of 2 cm does not seem to be sufficient to create a comfortable seat that wraps around the buttocks.
If the thickness is 4 cm, the seating comfort would be satisfactory.
View detail
Let's just call it RepairMaterial.
Used for OEMSeat Repair.
Seat is back to normal.
It doesn't have the performance to reduce buttock pain, but it does have the performance to reduce buttock pain.
I am satisfied with the hold feeling and as a repair material,
View detail
Fits: HONDA APE50, HONDA APE100, HONDA BROS, HONDA CB-1, HONDA CB1000SF, HONDA CB1100, HONDA CB250T, HONDA CB400SF, HONDA CB400SS, HONDA CB500FOUR, HONDA CB750, HONDA CB125, HONDA CB125T, HONDA FTR223, HONDA GB250, HONDA HORNET, HONDA JADE, HONDA SL230, HONDA SPADA, HONDA VRX400
the screen is good
I like that the clear screen is clean.
It bends well too.
It's nice that it's easy to install.
However, the screen cracks over time.
I don't know why.
However, the price is cheap so I can forgive it.
I hope the screen is not broken -------------------------------------------- --------------- The clear screen is clean. It is also good to bend. It is also easy to install. However, after time, the screen splits. I don't know why. But the price is cheap and you can forgive. I hope the screen won't break Powered by Google Translator
View detail
Fits: SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE250 burgman
Smoke Screen, a little better Parenthesis?
For the price, I think it is good.
The formation is inferior to OEM, but the GrommetScrew feels like a Limit stop and interfered a little with Cowl's Cover, so it was shaved off.
Up close. The molding is wavy at the mall, but this is still better as the OEM was dirty from the UV rays.
View detail
Convenient
[How is it used?
Rear boxB27N was attached and used.
There are no functional problems at all.
Was the one you received as per Image?
As per Image
I also liked that the length of the bike made the impression of a motorcycle a little more "large".
Was the installation difficult?
I was able to install and use it myself at the same time I purchased the VTR. It is not difficult at all.
Attaching the GIVIMonokey base is also no problem.
How was your experience with it?
I use it with a box, but it is also convenient for loading without a box.
It is the same height as the Seat, not tiered, and the Carrier is long enough to pack a lot.
[Included Parts:were they on?
Collars (thicker Washers) are included and are interchangeable with OEM collars.
[Was there anything that disappointed you?
There is a Tandem grip part, but it is thin and difficult to hold.
Paint film tends to peel off easily (especially at Bolt attachment points).
It is disappointing to see rust progressing from where the paint has peeled off.
[Opinions and requests to Manufacturer
I would like the Tube in the Tandem grip section to be thicker.
I would like to see the painting improved.
View detail
It is a very large size.
It seems to be quite sturdy and may require a bit of force and hang to install, but it provides a sense of security.
As the name of the product suggests, it is designed to be quite large, and may be a little too large when attached to a small VTR. (It depends on the intended use and the size of the box.)
If too large a box is used, the front/rear balance may not be good with the weight of the VTR, but this is a matter for the user.
I think the product itself is a good one with excellent cost performance.
View detail
Long Screen for GSX400
I did not want to change the style of KATANA, but I wanted to increase the wind protection performance. The height is within Plus4cm, so it does not need to be put back at the time of vehicle inspection. Note that there are two types, one for 400CC and the other for 1100CC. (The Screen for 1100CC could not be attached to 400KATANA because the mounting position holes are different.) 。 View detail
Fits: SUZUKI GSX750 KATANA, SUZUKI GSX1100S KATANA (KATANA)
Quality is more than the price.
It's much cheaper than other companies' products, but as other reviewers have said, I was able to install it without any problems, and it was surprisingly beautiful.
I've worn Titaniumium coat screens from two different companies, but after many twists and turns, I ended up going back to Black. I would appreciate a lower price to change my mind.
View detail
Used in Seat reupholstering.
I used this product to reupholster the Seat on my BirdCity125.
It is Repeat because I had bought it before with the Seat reupholstering of 400 Naked motorcycle.
Unlike Vinyl, which is thin like a garbage bag or packaging that comes out when you peel off the OEMSeat, this one feels thicker and firmer.
I used a Garbage bag to replace the seat because I didn't have a suitable Vinyl, but I can expect more durability than that.
In the past, I was able to fit the front and back of Vinyl to the short side of the rectangle on Naked motorcycle, but on BirdCity, I put Vinyl diagonally because Seat is larger than Naked motorcycle.
Vinyl is sent in a folded state, but the crease does not affect the Seat surface even if it is used at an angle or stretched a little by pulling in the reupholstering process.
It is not that I reupholster Seat so often, but I want Webike to keep it in stock because it seems to take a few days to order it.
View detail
Fits: SUZUKI GSX750 KATANA, SUZUKI GSX1100S KATANA (KATANA)
Very cheap, but satisfactory product.
The packaging of the product is quite solid, and the contents of the warranty are not certain, but to my surprise, even the warranty card was enclosed.
The Screen itself is not too dark. [Color] I'm happy with Smoke, it's close to the shade I was looking for.
As for the installation, there was a little gap of the hole, but I was able to install it without processing.
Because KATANA's Screen is easy to be cracked in the installation part, I applied Screw lock and fixed Torque to be weak.
Now, I would like to see how durable it is in the future.
It's very cheap but I'm satisfied with the quality of the product, so I can recommend this product to other KATANA riders.
View detail
Is it easier to work with MaintenanceSTAND and an assistant?
The KIJIMA Carrier that I had installed became rusty after 10 years, so I replaced it.
I chose this one because I often buy heavy goods (mainly alcohol) on my touring destination, and the largest load weight is 5kg.
The top case is a GIVI 32L capacity.
I'm clumsy, so it took me a long time because I dropped the collar and Washer when I installed it as usual.
Because it is quite large, it is necessary to readjust the belt of the Side Back, but the sense of security is superior.
View detail
Fits: SUZUKI GSX750 KATANA, SUZUKI GSX1100S KATANA (KATANA)
[Color] Smoke is too thick.
I use it for KATANA which I co-purchased with my brother. I bought this product as a trial rather than looking for an expensive OEM product. [Color] I just don't like the Smoke and the Fitting is good and more solid than I expected. However, I would still like to have an OEMscreen in good condition, so if you just want to bridge the gap until then... [Color] I will put up with Smoke being thick. View detail
Fits: SUZUKI GSX750 KATANA, SUZUKI GSX1100S KATANA (KATANA)
There may be a repeat.
I found this product when I was looking for a replacement because the screen in use had a vertical crack in it.
The price is reasonable, so I ordered it with the understanding that the holes on the Bolt were not aligned at the time of installation and it would require some modification.
When I installed it, there was no need for any modification at all, just tighten the bolts to finish the replacement of the screen.
(There may be some modification at the time of installation depending on the individual differences between vehicles.
Also, the Windscreen Mole that came with the OEM was just fit and could be used as is.
As for the color, I'm personally darker. [Color] I'm not a big fan of Smoke, but this product was Limit acceptable.
It can't be helped that the Screen has a fine Wound on it, but while the pricey Screen has its appeal, I also think that this product, which can be replaced frequently without worrying about the Gold amount, is also attractive.
View detail
Fits: SUZUKI GSX750 KATANA, SUZUKI GSX1100S KATANA (KATANA)
Costumers are expensive
Crack in the Screen of KATANA, and the for Replacement I bought it as a part
As others have written, they are made a little thinner than OEM Parts When installed, the rigidity is a little less than OEM parts, and the screen is Full I'm slightly hesitant to stick a face helmet in it (I might be the only one who does that) (Not W)
Another thing is that the screw holes are small (the position is right), so you need to make sure that the holes are in the correct position when you install them That it needed to be spread out Well, it's an inexpensive Other Brand Product, so I didn't really care for it
The shape is almost identical to the OEM and the OEM Windscreen Mole can be used as is 。 Because of the thinness of the product, the fit will be loose, so please use Rubber type G-10 Bond or clear SU multi-purpose adhesive It would be better to use the
It's still good after the replacement I'm happy with the return of the fearless look
I've only written about the bad parts, but I think it's a naka product considering the price
View detail
It could be a comfortable Seat, depending on how it's done
Grom's Seat is notorious for being hard and painful on the ass I'm also a fan of Other Brand ProductSeat, but the OEMSeat is a great choice I wondered if there was anything I could do about it
So, I challenged myself to change the Sponge on the part where the buttocks hit
I looked around the DIY store looking for a seat sponge, but I couldn't find anything Search "KIJIMA Ya "NTB The Seat sponge of NTB hit I was attracted to NTB from the aspect of thickness, but it is a little expensive So I decided to go with the decently priced EyeNet
First of all, peel off the skin of Seat of Grom Remove the thin vinyl in the middle of the gloom and remove it
Cut off the part where the buttocks of the seat hits the part of the eye NetSponge for length and thickness This work is the most difficult, it is better to pull the Cutline properly and cut carefully I used the Gold saw, but the Grom Seat is very wide and the work is very easy to cut There are many ways to cut the Seat sponge, and if you search on the net, you can find Hit I want you to find a way that works for you
After cutting, the Sponge is glued in Bond Then cut to the shape of OEM, but it is really difficult to cut the Sponge There are various ways to do this Some people even use grated gold I use Cutter Knife, which is soft Sponge, but Cutter's blade is very soft and easy to cut It's going to be ruined, so I need a few of them
If you finish it appropriately, the shape will still be there after the Seat cover is applied I'm going to finish this place patiently
Once the shape is ready, we put up the agricultural Multi first, replacing the OEM transparent Seat
Then, use the Tucker to re-stretch the OEMSeat cover back together and you're good to go
I skimped a bit on the molding, so it's a bit awkward looking, but it's a lot more comfortable Touring of over 100km is OK. 200km touring was also OK
I wish the product was a little thicker, I need something 3cm thick
The price is so low that you'll want to try it, but if you fail, you'll ruin your Seat, so be careful It is better to prepare for the
The quality of the finished product depends more on your skills than on the ingredients
View detail
Fits: BMW R nineT Scrambler, BMW R nineT Racer, BMW R nineT Pure, BMW R nineT
I've been looking for you
OEM Pads don't make sense to me as I have short legs, so I looked for them at Other Brand Products It was The quality and Size are just right This is a great product The price is also a little high View detail
Knee grip gets easier
The surface grip power is solid, and when I first saw it, I thought it might be small, but it's a good choice for each car model It looks like it's been cut, no problem
I can be satisfied with the color because it seems to fit in with the body of Black
It would have been even better if the price was a little lower
View detail
A little slippery, but quite warm
usage conditions
It's six degrees outside
clothing
Ed Win, WildeFire a
Rough and Road, Titaniumium Thinsulate inner underwear
Switch-on to maximum pre-heatMODE temperature, then automatically switch to mid-mid temperature But in reality, it takes a little more time to warm up completely
After it warmed up, it was warm enough at low and low temperatures for the above use It became hot on the way, so I raised my butt and lowered the temperature
The power consumption was low at 0.5W, so I wasn't sure if it would be warm enough, but it's enough for my needs It would have been better to have a temperature setting further down on the Low Low temperature
I installed it on the DL1000 V-STROM650, but it's Full face with a thick winter jacket It's difficult to see the Switch directly while riding with the Helmet So you'll have to use no-look to control the Switch while riding, but you'll be able to do it by groping You can see where the Switch is located and the Button has a moderate clicking feeling, so you can operate it somehow You can do this However, you have to remember the current temperature setting because you can't see it (In my case, I only used Low Low temperature, so I went from Pre-HeatMODE to Mid-Medium, (It was only operated once to Low Low temperature afterwards.)
In order to install the DL1000 V-STROM650, you need to make sure that the length of the front side band is as long as possible Because the Surface Fastener that had been left over at home was insufficient, I extended it by connecting the Surface Fastener that had been left over at home If it wasn't, it couldn't be installed
They are using a non-slip Material, but there it is in the WildeFire a V-stop Seat is relatively flat, so I didn't mind that much, but the front I think a downhill Seat motorcycle would be unsettling (If it were leather pants, it would be less slippery.)
I'm expecting it to be less prone to breakage because of the use of Carbon Fibre as the heating element I'm a little worried about the disconnection of this one because it seems to put a load on Wiring from the body to Band It is
It's a shame that the Seat is a little wavy as shown in the picture, but it's satisfactory enough for my usage environment Product
View detail