Reviews
Fits: YAMAHA Remote controller jog, YAMAHA TOWN MATE, YAMAHA Box, YAMAHA VINO(2Cycle), YAMAHA JOG APRIO, YAMAHA JOG POCHE, YAMAHA YV50 Z II, YAMAHA Axis Treat, YAMAHA GRAND AXIS, YAMAHA CYGNUS X, HONDA DIO, SUZUKI VECSTAR150, SUZUKI VERDE, SUZUKI LETS4, SUZUKI LETS5, HONDA LEAD 100, HONDA LITTLE CUB, HONDA LIVE DIO, HONDA FREEWAY, HONDA Byte
Grip replacement for LETS4
The LETS4 grips that I have been using for many years have started to hydrolyze and become soggy, so I switched to this product's grips.
The original grips can be easily removed by wiping Parts Cleaner between the handlebar and the grips.
The grip is the same as OEM and easy to use.
View detail
Fits: YAMAHA Remote controller jog, YAMAHA TOWN MATE, YAMAHA Box, YAMAHA VINO(2Cycle), YAMAHA JOG APRIO, YAMAHA JOG POCHE, YAMAHA YV50 Z II, YAMAHA Axis Treat, YAMAHA GRAND AXIS, YAMAHA CYGNUS X, HONDA DIO, SUZUKI VECSTAR150, SUZUKI VERDE, SUZUKI LETS4, SUZUKI LETS5, HONDA LEAD 100, HONDA LITTLE CUB, HONDA LIVE DIO, HONDA FREEWAY, HONDA Byte
It is cheap and good
Used for SUPER CUB 50Custom.
I bought this for a fine, nondescript Grip. I think it is good for the price, with no smell and moderate elasticity.
The length is just right and the hole Size is appropriate and fine.
It is a mistake to ask for the same level of durability as OEM, but if it gets worn out, feel free to replace it because it is a cheap product.
View detail
It's cheap, but...
The Mirror is cheap and not well made, and I was bothered by the sound of the Mirror shifting. I use it by inserting a rubber in the gap and holding it in place. Considering the price, I guess it's not so bad. View detail
Fits: YAMAHA Remote controller jog, YAMAHA TOWN MATE, YAMAHA Box, YAMAHA VINO(2Cycle), YAMAHA JOG APRIO, YAMAHA JOG POCHE, YAMAHA YV50 Z II, YAMAHA Axis Treat, YAMAHA GRAND AXIS, YAMAHA CYGNUS X, HONDA DIO, SUZUKI VECSTAR150, SUZUKI VERDE, SUZUKI LETS4, SUZUKI LETS5, HONDA LEAD 100, HONDA LITTLE CUB, HONDA LIVE DIO, HONDA FREEWAY, HONDA Byte
Easy to replace. The quality is appropriate for the price. I think it will last for a long time.
I raped the Handlebar Grip of the LETS4 replacement.
Perhaps the grip texture is different from the NORMAL (OEM Product), but this product has a mussed texture. In that sense, it does not slip.
*Working time is 20 to 30 minutes
After chopping off the old Grip with Scissors, I cleaned the old Bond by scrubbing and wiping, sprayed Parts cleaner on the new Grip and tube, and inserted it all at once.
*You can start over.
The Axel side inevitably feels uneven when you hold it, but since it is not an OEM product, this is to be expected.
The rest are fine, a little on the Large size and sticking out.
View detail
Fits: YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-10, YAMAHA MT-03, YAMAHA MT-125
Rose variation in quality is expected.
Mounting BoltMirror Bracket has been hammered in, but it is not completely hammered in, and even when the nut is tightened, about 1mm of bolt is visible on the top of the nut, which is not good looking.
Rose variation in quality is expected.
I would like to return it, but I have opened and installed it and it is Garbage.
View detail
The best
Bought at a good price. Will inform you around. We will repurchase if necessary. Thanks for the good stuff as always. everyone a safe rideWishing!! View detail
From Maru Mirror Now?"
OEM Equivalent Product of z900etc.
It was scratched from the beginning, but I don't mind (because it's cheap).
This is a replacement from z900rs whole Mirror, so it will take some time to get used to it.
Looks Shoo!" I did and loved it more than I expected.
View detail
good
I really like it I'll buy it again Packaging is neat and delivery is fast I'll spread it around I'm going to brag I'll buy it again View detail
Not particularly inferior to OEM
The shape of the bolt is different from the OEM, but you can't tell because it is hidden by the rubber. The price is 7,500yen for OEM, so it is very reasonable. I installed it and ran at high speed, but the sagging was the same as OEM, and I compared the plating part with OEM, but I couldn't find the difference. View detail
Fits: SUZUKI LETS1-4, Others , SUZUKI SEPIA ZZ, SUZUKI SEPIA, SUZUKI STREET MAGIC 50, SUZUKI ADDRESSV125, SUZUKI ADDRESS V100, SUZUKI ADDRESS110, HONDA LEAD, HONDA LIVE DIO, HONDA dunk, HONDA TACT, HONDA SMARTDio ZX, HONDA SMARTDio Z4, HONDA SMART DIO, HONDA SUPERDio ZX, HONDA SUPERDio Z4, HONDA SUPER DIO, HONDA GYROX, HONDA GYROUP
Unchanging quality
The price is cheaper than OEM and the size and shape are the same, so it is easy to install. It's a good deal if you want to replace it in your compatible car. View detail
High quality compatible products
Current. I'm reverting to OEM for various reasons.
I didn't have OEMMirror, so I bought a compatible one.
The OEM was just out of stock.
good point
Same quality as OEMMirror.
●The same high visibility as OEM.
Easy to install.
Plating finish is better than OEM.
A bad point
There is no sense of custom.
If this is exactly the same as OEM, you don't have to stick with OEMMirror.
And what I thought was the high visibility of OEMMirror.
Manufacturer is doing a proper TEST.
View detail
Fits: YAMAHA Remote controller jog, YAMAHA TOWN MATE, YAMAHA Box, YAMAHA VINO(2Cycle), YAMAHA JOG APRIO, YAMAHA JOG POCHE, YAMAHA YV50 Z II, YAMAHA Axis Treat, YAMAHA GRAND AXIS, YAMAHA CYGNUS X, HONDA DIO, SUZUKI VECSTAR150, SUZUKI VERDE, SUZUKI LETS4, SUZUKI LETS5, HONDA LEAD 100, HONDA LITTLE CUB, HONDA LIVE DIO, HONDA FREEWAY, HONDA Byte
Cosmetically satisfactory.
I replaced the Grip of SEA BASSLETS4.
It was easy to work with, although it required a little effort.
However, the Axel side of the OEM Parts has a covered part on the inside, so it cannot be covered there.
For now, it's easier to grip.
View detail
Mount 8mm Mirror to 10mm Handlebar
[Was there anything that disappointed you? Because the Screw of Mirror is too long or the Adapter has bottomed out, I put a bolt on it I did
Do you have any wishes or improvements you would like to make for the Manufacturer? If the female thread on the Mirror side is longer, BEST
[Do you have any products to compare it to? None
Frequently Asked Items
What made you decide to buy? I don't know if there is an 8mm Mirror set screw or a 10?Handlebar set screw adapter No
How was your experience with it? perfectly (suited)
Was the installation difficult? None
【Please tell me the installation point and hang】 None
[Was the Instruction Manual easy to understand? None
[Included Parts:were they on? Warranty Is it really necessary?
[Others] So it's currently out of stock
View detail
Cheap with Chrome plating
Replaced with a Plating Mirror and put it in the same Chrome plating Adapter Changed, there is no plating failure etc. which is common in cheap ones, and pre-treatment of plating The post-processing is well done, no unevenness, no swelling, no fogging, and the forging process is well done It is a good buy at this price I believe that a motorcycle that is well cared for can keep its quality for a long time It is very comfortable to use with a domestic plating mirror The shortness of the mirror and the length difference between the other side of the mirror without an adapter is very noticeable It fits in the Small limit View detail
Price is the name of the game, and it's cheap anyway!
I have a Small TypeEngine Displacement Volume car at home As it does not have a hazard function, I thought it would be useful for touring or in an emergency It was
First of all, the item delivered came with an aiNET warranty and the seal of the person in charge that it had been inspected (I'm impressed.)
But we don't have an Instruction Manual to deal with, but you can buy one at the time of purchase It was described in detail on the page of the product description of the company, so I wrote a memo and started to work on it
The work was done in the order of CYGNUS, GORILLA, and MONKEY
The installation is finished by interrupting the Front Blinker Wiring on all vehicles
The feeling of using this product is that this is a top ranking for my motorcycle at this price It was like being on top
In addition, the Switch can be installed with double-sided tape to make it easy to turn on and off It is easy to install on any motorcycle because you can turn it on and off It is
The other unknown is what happens around the Switch when it rains
View detail
Fits: Others Universal
I like Design
When compared with the product of Komine used until now
The hole through which the glue passes is Large rinse and the side face of the index finger
It gets a little cold and the hole through which the Brake lever passes
I processed it because it is very small..
If you use Handlebar Cover and Grip heater together
It is OK with light Gloves except cold freezing class
If a hand warmer is added, the top of the finger is also warm
There is no blind spot.
Design is also simple and refreshing and it is a pattern with reflective material
We will also upgrade night visibility.
Waterproof performance is upgraded because it is brand new
It seems better not to expect so much.
View detail
Fits: Others , Others Installation Screw Diameter 8mm Normal Thread Screw
It matches well for MONKEY
Attached to Monkey.
Similar products are available in other Manufacturers, but purchase the cheapest product. On the opposite side of the mirror from the center "Tekari" I was concerned about it before purchasing, but it is not bothersome in actual thing. Also, because I was Short Bracket I was worried that the backward visibility would be bad, but since I was originally not so good at OEM I got used to it.
Manufacturer 's correspondence after purchase was also helpful for being kind and polite.
However, I am afraid that the compatibility with the vehicle that is Bore up is bad, "Blur" I'm confused because it's terrible. Although it can not be checked just because this is not possible before purchase ....
View detail