Reviews
Fits: SUZUKI Address V100, SUZUKI ADDRESSV125, SUZUKI LETS(4Cycle), SUZUKI ADDRESS V50(2Cycle), SUZUKI ADDRESSV125
Anyway, I chose it for its cosmetic value.
I chose this product because it was very cheap, and I don't feel any problem in using it. View detail
Wiring at both ends is thick
[How is it used?
It is used as a safety protection for the 12V Wiring handling from Battery.
How was your experience with it?
The cable of both ends of the holder is thicker because the Fuse of up to 30A can be attached to this product. I think that there is no problem if it is a place where it is not seen though the feeling of discomfort comes out when I do Holder attachment etc. with a thin sq wire.
[Points to note]
Fuse is not included and you will need to purchase your own MINI flat type.
For use outside the car, we use the Wiring Cover together to increase the waterproof property.
View detail
![A-Screw] LED Blinker Tail Lamp Set](https://global.webike-cdn.net/photo/impression/68/68cec7752c89409c7d5021afb823ed20L.jpg)
Along with the rear fender-less
There is also a smaller LED Blinker, but I thought about the appeal to the following vehicle, and I installed this one which can be refreshed next to the License Plate at a lower price than ACTIVE products while gaining the area of the light emitting part, with the Bracket of Home center (Reflector I installed it with Bracket (Reflector is ACTIVE TYPE 3) and Screws.
Blinker relay is replaced to convert to LED, License Plate Light is still OEM.
View detail
Fits: SUZUKI LETS1-4, Others , SUZUKI SEPIA ZZ, SUZUKI SEPIA, SUZUKI STREET MAGIC 50, SUZUKI ADDRESSV125, SUZUKI ADDRESS V100, SUZUKI ADDRESS110, HONDA LEAD, HONDA LIVE DIO, HONDA dunk, HONDA TACT, HONDA SMARTDio ZX, HONDA SMARTDio Z4, HONDA SMART DIO, HONDA SUPERDio ZX, HONDA SUPERDio Z4, HONDA SUPER DIO, HONDA GYROX, HONDA GYROUP
Unchanging quality
The price is cheaper than OEM and the size and shape are the same, so it is easy to install. It's a good deal if you want to replace it in your compatible car. View detail
Fits: SUZUKI Address V100, SUZUKI ADDRESSV125, SUZUKI LETS(4Cycle), SUZUKI ADDRESS V50(2Cycle), SUZUKI ADDRESSV125
It's cosmetic.
I chose this product for its cost performance. I don't know the durability yet, but I think the Touch is not so different from the OEM Product. View detail
Tough impression of Bates Headlight
I was looking for a Bates Headlight with Light Guard with a tough vibe to customize it to a military look and came across this one.
Black Body and Yellow Lens.
The material is Steel and it is painted Black. The attached Nut and Washer are also BlackPlated.
If you use it for a long time, there is a possibility that Rust will float.
The paint is careful and there is no Wound.
Wiring is Minus, Low and High with Bullet Terminal's Male on each.
It's not a Coupler, but it's not too difficult if you attach the Bullet TerminalFemale to the corresponding cord on the body side.
However, the Net description and the code colors for low and high were reversed.
As for the performance as the important light, the irradiation range is a little narrow and dark impression, but because it is yellow color, it is the range which can be satisfied as a sub-Motorcycle use because the shade comes to the surface.
View detail
Is it easier to work with MaintenanceSTAND and an assistant?
The KIJIMA Carrier that I had installed became rusty after 10 years, so I replaced it.
I chose this one because I often buy heavy goods (mainly alcohol) on my touring destination, and the largest load weight is 5kg.
The top case is a GIVI 32L capacity.
I'm clumsy, so it took me a long time because I dropped the collar and Washer when I installed it as usual.
Because it is quite large, it is necessary to readjust the belt of the Side Back, but the sense of security is superior.
View detail
High quality compatible products
Current. I'm reverting to OEM for various reasons.
I didn't have OEMMirror, so I bought a compatible one.
The OEM was just out of stock.
good point
Same quality as OEMMirror.
●The same high visibility as OEM.
Easy to install.
Plating finish is better than OEM.
A bad point
There is no sense of custom.
If this is exactly the same as OEM, you don't have to stick with OEMMirror.
And what I thought was the high visibility of OEMMirror.
Manufacturer is doing a proper TEST.
View detail
Fits: SUZUKI Address V100, SUZUKI ADDRESSV125, SUZUKI LETS(4Cycle), SUZUKI ADDRESS V50(2Cycle), SUZUKI ADDRESSV125
usually
It is used for the front of AddressV125S. The brake effect is normal. The brake effect is normal, but if you ride around town and don't drive too hard, the cost is good. View detail
Fits: KAWASAKI GPX250/R/R2, KAWASAKI Eliminator 400, KAWASAKI Eliminator 400, KAWASAKI Eliminator 400, KAWASAKI EX-4, KAWASAKI GPX750R, KAWASAKI GPX750R, KAWASAKI GPZ400R, KAWASAKI GPZ400S, KAWASAKI KLE400, KAWASAKI KLE250 ANHELO, KAWASAKI ZRX400, KAWASAKI ZX-10, KAWASAKI ZZR250, KAWASAKI ZX-10, KAWASAKI ZZR400, KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR1100 RS, KAWASAKI ZEPHYR400
That's totally fine. Great and cheap.
I bought it because of the low price. The accuracy of the replacement is perfect. The impression when running is necessary enough, and it works normally to the extent that it is taken aback. In town riding. I use Downshift with it, so I may not be dissatisfied with it. For me, I am satisfied with Large. I'll use this one next time. View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZXR400R, KAWASAKI ZXR400R, SUZUKI GSX-R250/R, SUZUKI GSX-R250/R, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX250R, SUZUKI GSX250R, SUZUKI RG400, SUZUKI RG500γ (Gamma), SUZUKI RF400, SUZUKI RF900, SUZUKI RG250 γ, SUZUKI RG250 γ, SUZUKI GSX400, SUZUKI GSX400S KATANA, SUZUKI GSX750F, SUZUKI GSX750 KATANA
It's a super cheap Pad!
I checked it casually and found that the ground Gold was out, so I hurriedly replaced it. The accuracy of the product is perfect, and it is expected to last because the thickness is enough in Semi Metal. I think that the effect is weakened by the exchange from the Red Pad, but I think that it is necessary enough because it is not the type that makes the Rear work hard. Anyway, it is cheap and Large satisfaction. View detail
![[Avis] Neodym Drain Bolt Suzuki Vehicle](https://img.webike-cdn.net/catalogue/images/34041/61635or61641_001_TS.jpg)
Fits: SUZUKI GF250, SUZUKI GSX-R250/R, SUZUKI GSX-R400, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX400, SUZUKI GSX400S Katana, SUZUKI RF400, SUZUKI GF250, SUZUKI GSF1200, SUZUKI GSF750, SUZUKI GSR400, SUZUKI GSX1100 F, SUZUKI GSX1400, SUZUKI RF400, SUZUKI SV1000, SUZUKI VX800, SUZUKI Across, SUZUKI GRASS TRACKER, SUZUKI BANDIT1200
The dimples were just for decoration.
I assumed from the picture that there was a Wiring hall on all the hexes and bought them, but the indentations were decorative.
It's my fault, but I didn't check it properly, installed it, filled it with oil, and noticed it when I was wiring.
If you are thinking about Wiring, NG.
As for the other performance, I think it is fine.
View detail
Fits: HONDA fusion, HONDA fusion, HONDA FUSION, HONDA FUSION, HONDA FUSION, HONDA FUSION
Good product
Very good. It takes one week from order to receipt. The packaging of the accessories is also very safe. The most important thing is that the quality of the accessories is very good. They are basically the same as the original ones. They have not been replaced yet, etc. When the N many accessories arrive together, do it again. Will continue to place orders, if there is a discount on freight, it would be even more ideal. ---------------------------------------------- Very good, from order to receipt of goods a week, faster, accessories, packaging is also very safe, the most important thing is good quality accessories, original pieces with essentially the same, there is no replacement up, other more than N before you start fitting together almost to the time. It will continue under orders, if the freight can be a discount, even more ideal. Powered by Google Translator View detail
Fits: YAMAHA Remote controller jog, YAMAHA TOWN MATE, YAMAHA Box, YAMAHA VINO(2Cycle), YAMAHA JOG APRIO, YAMAHA JOG POCHE, YAMAHA YV50 Z II, YAMAHA Axis Treat, YAMAHA GRAND AXIS, YAMAHA CYGNUS X, HONDA DIO, SUZUKI VECSTAR150, SUZUKI VERDE, SUZUKI LETS4, SUZUKI LETS5, HONDA LEAD 100, HONDA LITTLE CUB, HONDA LIVE DIO, HONDA FREEWAY, HONDA Byte
Cosmetically satisfactory.
I replaced the Grip of SEA BASSLETS4.
It was easy to work with, although it required a little effort.
However, the Axel side of the OEM Parts has a covered part on the inside, so it cannot be covered there.
For now, it's easier to grip.
View detail
![[Avis] Neodym Drain Bolt Honda/Yamaha/Suzuki/Kawasaki Vehicle](https://img.webike-cdn.net/catalogue/images/34041/61634or61640_001_TS.jpg)
Fits: HONDA CBX250, HONDA XLR250, KAWASAKI GPZ400, KAWASAKI GPZ400, SUZUKI GSX250FX, YAMAHA TT250R Raid, HONDA NSR80, HONDA NSR50, HONDA GORILLA, HONDA VTZ250, HONDA MAGNA, HONDA JAZZ, KAWASAKI ZRX1200, HONDA VTR250, HONDA MONKEY, KAWASAKI W650, KAWASAKI ZRX1100, KAWASAKI ZZR1200, KAWASAKI ZRX400, KAWASAKI ZXR750
Recommendation Products
[How is it used?
I use it on many motorcycles to clean the engine oil. My favorite
Was the one you received as per Image?
As per Image
How was your experience with it?
If you are using just an OEM Screw, you are missing out. There is such a good product!
[Points to note]
Use the Torque wrench and don't squeeze too hard!
How did it compare to other products?
I've only used this Manufacturer, there is no hole for Wire, Small hole is Design. I don't race so it's not a problem for me, but if you have a race car, look for a different product.
Other items that would be helpful
I'm sure a lot more people would buy this product if you put a hole in it for the Wire to go through, instead of just the Design!
View detail
Fits: HONDA CBX250, HONDA GB250 CLUBMAN, HONDA VT250 SPADA, HONDA XL-DEGREE, HONDA XLR250, HONDA XR250MOTARD, HONDA DREAM50, KAWASAKI GPZ400, KAWASAKI GPZ400, KAWASAKI GPZ900R, KAWASAKI Z400FX/Z400J, KAWASAKI Z400GP, KAWASAKI ZX-12R, KAWASAKI ZX-6R, KAWASAKI ZX-9R, KAWASAKI ZXR250, KAWASAKI ZZR250, KAWASAKI ZZR1100/ZX-11, KAWASAKI ELIMINATOR 400, KAWASAKI ELIMINATOR 750
not a match for (e.g. outclassed)
[How is it used?
2020 ZX-6R
Was the one you received as per Image?
There is no hole for Wiring.
I feel lightly cheated. If you look closely at the picture, you can see it.
View detail
Fits: HONDA CB-1, HONDA VTR250, HONDA jade, HONDA HORNET900, HONDA HORNET600, HONDA HORNET250, HONDA CB400SF, HONDA CB1300 SF, HONDA CB400SF, HONDA CB1000 SF (Big One)
I'm glad I bought it
The Blinker Bracket on my 19991 JADE broke off and blew up.
I bought it at the last minute.
The standard of the Cable is different, and it is only OuterCase that I used.
Cable and Valve both used the old one, but it didn't feel any different.
For the price, this was a super bargain for the quality.
View detail
Fits: SUZUKI GSX750 KATANA, SUZUKI GSX1100S KATANA (KATANA)
Cheap but good build quality
My brother and I have a KATANA Screen that has deteriorated badly over the years, so I'm looking for an original OEM Screen that's in good condition, but it's hard to find. [Color] I bought and use Smoke and Clear. My brother... [Color] We like the Smoke and we like the Clear, so we'll stick with this until we find an OEMscreen. View detail
Fits: SUZUKI GSX750 KATANA, SUZUKI GSX1100S KATANA (KATANA)
[Color] Smoke is too thick.
I use it for KATANA which I co-purchased with my brother. I bought this product as a trial rather than looking for an expensive OEM product. [Color] I just don't like the Smoke and the Fitting is good and more solid than I expected. However, I would still like to have an OEMscreen in good condition, so if you just want to bridge the gap until then... [Color] I will put up with Smoke being thick. View detail
Fits: HONDA CB750, HONDA CBX250, HONDA NS250, HONDA NS400, HONDA VF400, HONDA Forza(MF10), HONDA fusion, KAWASAKI Eliminator 400, KAWASAKI Eliminator 400, SUZUKI DF200, SUZUKI GSX400, SUZUKI RF400, SUZUKI RG400, YAMAHA XZ400, YAMAHA vino, SUZUKI SV1000S, SUZUKI SV1000, KAWASAKI ZZR1200, KAWASAKI ZX-12R, KAWASAKI 1400GTR
CB125T JC06
I bought it for the spare of CB125T JC06. It was darker than NORMAL and the optical axis was not clear. Well, it is the feeling that it cannot be helped for the price. When I tried to install it again, the high beam did not light up. Unfortunately, I discarded it. I think it is good to have it for spare because the price is cheap. View detail