Reviews
Fits: KAWASAKI GPZ900R
Benefit of having both ends flat
This problem occurs when the clutch release piston of the GPZ900R is changed from the OEM one to the ZZ−R1400 one, which has a slightly larger piston diameter.
ZZ−R1400 Clari Release piston has a sphere embedded in its center, and the sphere end of the push rod and the center of the release piston sphere are slightly gapped, so the sphere end of the push rod and the center of the release piston are gapped if they are left as they are. If the ball end of the push rod and the ball center of the release piston are not properly adjusted, there is a possibility that the ROD will bend and the clutch will not be able to be cut.
The flat end of the rod had been touching the holder of the clutch operating plate and was working properly, but now the ball end is on this side and the flat end is on the release piston side. Reversed. When you do the "+", the HolderCenter is pressed by the sphere, causing it to wriggle and fray. Well, it may be tens of thousands of kilometers away, but it is not good for mental health!
The ends are induction hardened for strength and both ends are flat! I think this product is a large change that will be appreciated by those who have replaced the release piston.
View detail
Fits: KAWASAKI GPZ900R
Solid Fee Ring
[How is it used?
Touring city driving
Was the one you received as per Image?
When it first arrived, the ROD was bent due to a packaging error. I received a normal one after receiving a replacement.
The construction is very good.
Was the installation difficult?
Simply remove the Clutch release.
How was your experience with it?
It is now a solid fee-ring.
[Included Parts:were they on?
It was attached.
[Was there anything that disappointed you?
There is none
Other items that would be helpful
Installation Point or hang
Simply remove the clutch release and replace it.
Availability and clarity of Instruction Manual
There is no Instruction Manual; it is better to have Service Manual and Parts List.
important point
None
Items to buy together
None
Opinions and requests to Manufacturer
Torque management should be described for beginners, including a simplified Instruction Manual and Bottle.
View detail
Fits: KAWASAKI GPZ900R
It is not enough to use hard Material.
This ROD is used when using Clutch release such as ZZr1400
The release part is spherical, and the ROD is usually inserted backwards, but the round tip is used to press the ClutchBearing.
If the clutch is used as it is for many years, the clutch may not be able to be cut due to the displacement of the clutch.
This time, Ryohira can hold Release and ClutchBearing firmly, so it is safe.
The material is not the hard material of other manufacturers, but the same as OEM etc., which eliminates bearing damage.
If you are replacing the Clutch release, you should definitely use it!
View detail
OEM
I think it's great that the ROD is the same as the OEM without using any strange processing or materials!
It's discontinued, so it helps.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ900R
Thank you!
【What made you decide the purchase?】 It is OEM shortage and this is all.
【How was it actually used?】 Materials similar to OEM, Size As a substitute there is no problem!
【Was it difficult to install? (Hard parts case)】 Large durable if you check the usage.
【Please tell me the point of installation and hang (in the case of Hard parts)】 Preliminary information gathering.
[Is there anything I was disappointed about?] None.
【Hope for Manufacturer - Please let me know if there are any improvement points】 Thank you for making lack of parts!
【Have you compared items?】 OEM second hand goods
With the replacement of the Clutch release, the place where we asked for an estimate requesting replacement for a new part, what a reply of a missing item is!
I also thought about OEM second-hand goods, but then what I'm using now is enough.
By the way, I found it at Mr. MARVELOUSEngineerRing's HP, so I found out where I confirmed it.
OEM and same etc. Material of - Size. It is grateful for old cars that have become more lack of items ♪
Just remove the OEM and install it the same way. The shape of the edge is also flat and spherical for OEM and also for this product. Pierce the same side to the Engine side. (If you are diverting from Release, please use the appropriate side. There is a possibility that Clutch will not run out)
Although the effect of renewing this Parts is self-satisfied, I bought it also in the sense of supporting MARVELOUSEngineer Ring who made a missing item Parts.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ900R
It is a thankful item.
Because ManufacturerOEM Product is out of stock, as with Manufacturer etc.. It is very grateful for us to sell items at affordable prices.
It is quenched and Black Spec. So it seems to be able to expect durability.
View detail