Reviews
Fits: HONDA Today, HONDA MONKEY, HONDA MAGNA50, HONDA JOKER Helmet, HONDA JAZZ, HONDA GYROX, HONDA GORILLA, HONDA GIORNO CREA, HONDA DIO(4Cycle), HONDA APE 50, HONDA APE 100
Standard mirror Safety Standard Corresponding Product
Installed on Ape100.
Hopefully, we wanted the OEM Mirror, but it was already discontinued, so we chose the OEM-looking MotorcyclePartsCenterNo.12 Mirror. Although it is a standard mirror, it meets safety standards and provides excellent rearward visibility.
Motorcycle mirrors are available in various types such as Mini type, Aluminum Cut-out Type, Foot shape, AeroCarbon, etc. You can choose any type of mirrors for motorcycles, but please note that any type is not OK. However, please note that not all types can be replaced.
Motorcycle mirrors are clearly standardized under the Road Trucking Vehicle Law. The details can be viewed by anyone at the Ministry of Land, Infrastructure, Transport and Tourism's Home Page, but the drawback is that there are many legal terms. To put it bluntly, it is difficult to understand. Therefore, I would like to explain what I have researched in my own way as simply as possible.
There are two points.
One is that the standards vary depending on the year of the Motorcycle.
The other is, Area." Large. The addition of the criteria for
The latest safety standards apply to all motorcycles manufactured on or after January 1, 2007, and all vehicles type-approved on or after January 1, 2005. The following is a step-by-step explanation of the safety standards for Motorcycle mirrors that meet these requirements. It is important to note that all items of the safety standards must be [Color] It is something that needs to be CLEAR.
The mirror itself can be of any shape, round, square, or hexagonal. However, the area of the mirror part of the Mirror must be at least 69?.
If you are wearing a circular mirror, it must be neither too large nor too small. It must have a diameter of at least 94mm. On the other hand, it should not be larger than 150mm.
For noncircular Mirrors, the Large size must be within 120×200mm. This is the same condition for any shape other than a circle, such as a square, oval, or hexagon. The opposite size of 200×120mm is also acceptable. The size must also be able to fit a circle with a diameter of 78mm. Mirror that is too large or too thin is not acceptable.
In addition to area and bulk size, the other important point is the installation. The following must be satisfied for the installation.
Firmly attached.
The handlebar must be installed 280mm or more outward from the center of the handlebar.
・Quantity:Pair (for Left and Right) Must have Mirror on both
Firm means solid and unbreakable, so Mirror that can be easily detached is not acceptable. Also, the center point of the Mirror mirror surface must be at least 28 cm away from the center of the handlebar. Finally, Quantity:Pair (for Left and Right) Both must have Mirror. If only one side has Mirror, it is NG. (Motorcycle with one Mirror is not acceptable except for Moped 1)
There are other rules besides area, size, and installation method.
The driver must be able to adjust it in the normal operating position.
The structure must be capable of cushioning the impact of contact with pedestrians, etc., and must not be of a type that could cause injury to pedestrians, etc.
Vehicle Quantity:Pair (for Left and Right) Ability to check traffic conditions 50m above the outer line.
The mirror shall not conform if it has significant distortion, cloudiness or cracks on the surface.
Particular attention should be paid to the fact that cracks and other problems can be NG. Even a few Cracks should be replaced before the vehicle is inspected. It should also be adjustable.
For example, a Case that is welded and fixed in such a way that it cannot be oriented; this is a no-no because it will not be adjustable.
Strictly speaking, there are a few more Mirror security standards, but the rest is too detailed. [Color] If it is clear, it is large and sturdy. However, we have talked about area, Large sturdiness, mounting, and many other criteria so far. [Color] It means that you have to be CLEAR.
So what exactly happens to Motorcycles manufactured before 2007? Motorcycles manufactured before December 31, 2006, and motorcycles whose type approval date is before December 31, 2004. but in this case, there is no stipulation on the large size (area and diameter) of the mirror surface, otherwise they will be together.
In other words, the basic safety standards are the same, but for motorcycles manufactured in 2007 and later, the requirement for a large mirror surface (69?, 120×within 200mm, or within a circle of 78mm, etc.) has been added.
Incidentally, for motorcycles manufactured before November 30, 1975, the safety standards are even different 。 However, since there are very few of them in this year, we will omit them.
You may have noticed that Motorcycle Mirror also has safety standards that are quite detailed. Then, what happens if they do not conform to the safety standards? First of all, if the vehicle does not conform to the safety standards, it will not pass the vehicle inspection. In addition, not only will the vehicle pass or fail inspection, but it will also be the subject of enforcement action as a vehicle that has been improperly modified or poorly maintained.
(Prohibition of unauthorized modification, etc.)
Article 99-2 No person shall, with respect to a motor vehicle for which a valid automobile inspection certificate has been issued pursuant to the provision of Paragraph 1 of Article 58 or a non-inspected mini motor vehicle for which notification of use has been given pursuant to the provision of Paragraph 1 of Article 97-3, perform any alterations to the vehicle or its parts, installation or removal of equipment or any other similar acts, which would cause the vehicle or its parts to conform to safety standards. 。 Citation:Article 99-2 of the Road Trucking Vehicle Law
If the vehicle is tampered with, the penalty is imprisonment for not more than 6 months or 300,000 yen, and if the vehicle is poorly maintained (e.g., tail lights), the penalty is one point and 6,000 yen in penalty gold.
In practice, it seems that Mirror does not often face enforcement action, but you should be aware that there is a good chance that you will be caught for violations or illegality. (If you are caught, you cannot complain.) And of course, the same applies to motorcycles under 250cc without inspection.
Especially, the size and the area of the Mirror are likely to be caught by the security standard, if you want to add a Mirror with good parenthesis or a slim Mirror,
The area must have an area of 69?.
Circle with a diameter of 78mm must be concealed.
For circular Mirror, the diameter must be between 94mm and 150mm.
In the case of a motorcycle manufactured in 2007, the above three points are particularly important. The most important thing is to be able to see the rear of the vehicle.
I hope you find the above helpful.
For details, please refer to the Homepage of the Ministry of Land, Infrastructure, Transport and Tourism.
http://www.mlit.go.jp/jidosha/jidosha_fr7_000007.html
View detail
Fits: HONDA Today, HONDA MONKEY, HONDA MAGNA50, HONDA JOKER Helmet, HONDA JAZZ, HONDA GYROX, HONDA GORILLA, HONDA GIORNO CREA, HONDA DIO(4Cycle), HONDA APE 50, HONDA APE 100
Cheapness is appealing. The picture is good enough.
Installed on a HondaApe100.
Since the OEM Mirror was discontinued, we selected MotorcyclePartsCenter's No. 12 Mirror from among the less glamorous ones that looked similar to the OEM.
The result was a good MATCH for the overall atmosphere of the car body.
I am satisfied with the Mirror's copying.
The construction is commensurate with the price, so we recommend this Mirror to those who, to put it bluntly, are looking for cheapness.
View detail
Good
Adaptations had to be made so that the front lights could flash intermittentlyAbout quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasing View detail
Fits: KAWASAKI ESTRELLARSCustom, KAWASAKI ESTRELLARS
Stretched well.
I bought Tucker to reupholster my old motorbike, and I didn't have the budget to spend tens of thousands of dollars on OEM or custom-made stuff, so I decided to do it myself at a low price. The thickness and texture of the seat is not as good as OEM, but I regretted that it looked cheap when I received it, but after I stretched it, it looks beautiful. The ride quality is also better. Even if I applied anti-slip coating, after applying the brake, it was gapping in front of the car but now it is stable and easy to drive without sliding. The material that looked cheap is now shiny and beautiful. I've never done any DIY before, so I'm a beginner and I'm too lazy to watch YouTube, but I can get by even if I do it haphazardly. Now I'm planning to reupholster it again and put Nylon in it for rain protection and Gel Zab under the Seat for long distance protection. View detail
Good visibility!
I installed this together with my Ninja 250SL that I modified for Gymkhana when I converted it to NAKED. The best value License Plate Bracket and Reflector are available in quantity.:I am very happy with the Set. The visibility is very good as it claims to be equipped with many high brightness LEDs. The wiring is also very well made, so it is a recommendation! View detail
cylinder piston group
Good afternoon, I received it today, I like everything. The quality is up to par. Delivery ahead of time. Thanks guys. They put a full set of gaskets, a finger View detail
Fits: YAMAHA VINO, YAMAHA VINO
It's Recommendation because of the quality!
My brother-in-law's Scooter (VINO) Seat was torn, so I reupholstered it for him. The fabric stretches well so it is easy to pull and put up! It is also durable, so it doesn't hurt at all even if I get in and out of the car every day! It's a recommendation because it makes the dirty Seat look like new! View detail
Fits: HONDA Today, HONDA Today, HONDA DIO(4Cycle), HONDA DIO(4Cycle)
Repair is completed at a low cost!
Installed on ThirdMotorcycle's Today that goes to the nearby Convenience, replacing an OEM OEMRear Suspension that had been scuffed up and deteriorated. The price is very low, but I have had no problems with it! I am Large satisfied with the low price and the refresh! View detail
Cowl mounting holes do not fit
Paint quality is good. It makes it look like a new car! I had to force it on with Tie Wrap or re-drill the holes … I think it may have been an individual mistake, but … I drilled the holes with a Drill and installed it. If you can install it, you will be supremely satisfied. View detail
Poof, a new car!
While replacing and repairing the keyhole of my father's APRIO, which was the victim of an attempted theft, I also replaced the cowl! This is a very large cowl! The old OEM cowl was reborn as a shiny new cowl, and it feels like a new car! If you look closely, you can see that there was some dust in the cowl and the mounting holes did not fit slightly, but it is just a matter of widening the holes and doing some other simple things! The material of the Cowl is not Pe LePera, but the same level of strength as OEM! This is really a Recommendation! View detail
fitment issues
I was excited to recieve this poduct. There are a few fitment issues with these plastics for my af27 dio. The front piece the 4 bolts on the back side only two line up the other two are so far off would need to enlarge holes to make it work. The top headlight piece does not fit well pops out on the one side and on the middle. The rear pieces seems to fit alittle better but not the best. View detail
Fits: YAMAHA SEROW225, YAMAHA SEROW225
The fabric is slightly thicker than the company's SY-107Type.
[How is it used?
We decided to reupholster the seat of a 1997 SEROW225 WE that we acquired two years ago. The seat had originally deteriorated, but due to playing in the mountains, etc., the surface skin had reached its limit.
I searched Webike for Seat fabric to reupholster. MotorcyclePartsCenter. There were only two products available, both in the same color scheme as the OEMSeat type, and I was torn between buying one or the other, so I decided to buy both because they were cheaper.
This time in Webike's product introduction section. "High quality" It was described as (Price at time of purchase:3,150 yen) This will be a review of Seat fabrics in the "Seat fabrics" section.
How did you like it?
As I said above. SY-107V (High Quality Type) When SY-107. (Standard Type) The Standard Type was actually used for the Seat reupholstery work, as we purchased the Seat fabric at the same time as the Standard Type.
If I write honestly. If you weren't told, you couldn't tell them apart just by looking at them." and if you touch it, you'll find that the high quality Type is more like A little thicker?" It was like
Well, the price of Standard Type is 2,830 yen and High Quality Type is 3,150 yen, and the difference is only 320 yen.
When it was listed in the introduction section. The higher one is shiny. The cheaper one is WITHOUT Gloss. However, the actual product arrived in a semi-glossy condition, and although it is hard to tell the difference just by looking at the product, the thickness of the fabric is enough to make the product look like a "good" product. High-Quality Type may last a little longer.
I would like to replace the surface skin of my current Standard Type with this product when it becomes useless.
How did it compare to other products?
Compared to the Standard Type SY107, which I purchased at the same time, if there is a price difference of 320 yen, would it be better to purchase this product, SY107V?
Incidentally, as of February 2024, YamahaOEM's Seat assembly. is no longer available, but you can still purchase it at Seat CoverSingle Item! (17,380 yen) 。
Even though the fabric is a little thicker than the Standard Type, it is not as good as YamahaOEM's Seat fabric, but considering the price, I think this product is well worth purchasing.
[Points to note]
When reupholstering, if the Tucker is driven in halfway, there is a risk that the fabric will break from there.
Front and back of the Seat are loosely secured to the Quantity:Pair (for Left and Right) When pasting the "Beauty" sponge, it should be pasted along the "Seat sponge" without wrinkles to make it beautiful.
Other items that would be helpful
The deciding factor in the purchase
I usually post PartsReview with hanghang and use my WebikePoints that I have saved up, so I can buy them at Webike. SEROW225. The only two types of Seat fabric for reupholstery for the new car were available in MotorcyclePartsCenter's lineup.
(Seat fabric from Universal Product was not an option because we wanted to use the same color pattern as the OEM.)
[How is it used?
I enjoy all kinds of Situations, from everyday city driving to mountain play.
【Included Parts:presence or absence】.
Seat CoverQuantity:1 pc. only, this one also did not have Tandem belt, 1995 (4JG2) From SEROW225 W onward, Tandem belt is not included even in OEM, so there is no problem.
[ITEMS TO BUY TOGETHER
Seat fabric to fasten to Seat Base seat. Tucker. and short-legged core.
Vinyl bag with large diameter to prevent flooding of the seat sponge (Large sturdy with Vinyl bags for Garbage collection) is different for each person, so those who use it should purchase it while they are at it.
In my case, I do not use Vinyl, but I apply SiliconCoking agent to the seams on the reverse side of the Seat fabric to prevent water from seeping through the seams.
Opinions and requests to Manufacturer.
I honestly think it would be better to use this product as a 1 pc system. I would like to continue to use Lineup, but I am thankful that I have a choice.
View detail
Cheap, thin, but usable.
[How is it used?
This 1997 SEROW225WE, which I acquired two years ago, was purchased by an acquaintance of mine six years ago, and I had done a fair amount of repair work on it when I bought it six years ago.
After receiving it the year before last, we prioritized restoration from a functional point of view, but the Seat Cover, which was originally on the verge of unraveling because it had been used for playing in the mountains during that time, had reached its limit.
I searched Webike for Seat fabric to reupholster. MotorcyclePartsCenter. There were only two products available, both in the same color scheme as the OEMSeat type, and I was torn between buying one or the other, so I decided to buy both because they were cheaper.
This time The cheapest one (price at time of purchase:2,830 yen) Review of.
How was your experience with it?
When it was listed in the product section. The higher one is shiny. The cheaper one is WITHOUT Gloss. The actual product that arrived was semi-glossy and I could not tell the difference just by looking at them. When I touched them, I found that the more expensive one (SY107V) had slightly thicker fabric and seemed to last longer than the less expensive one (SY107).
How did it compare to other products?
Incidentally, as of February 2024, YamahaOEM's Seat assembly. is no longer available, but is still available in the Seat CoverSingle Item (17,380 yen).
As expected, the fabric is thinner and less durable than YamahaOEM's Seat fabric, but at this price, it makes enough sense.
[Points to note]
As mentioned above, the Seat fabric is thin, so if the Tucker is driven in halfway during reupholstering, there is a risk that the fabric will break from the Seat Base.
Front and back of the Seat are loosely secured to the Quantity:Pair (for Left and Right) When pasting the "Beauty" sponge, it should be pasted along the "Seat sponge" without wrinkles to make it beautiful.
Other items that would be helpful
The deciding factor in the purchase
I usually post PartsReview with hanghang and use my WebikePoints that I have saved up, so I can buy them at Webike. SEROW225. The only two types of Seat fabric for reupholstery for the new car were available in MotorcyclePartsCenter's lineup.
(Universal Product's Seat fabric was not an option because we wanted to use the same color pattern as the OEM.)
[How is it used?
It is used in various Situations from street riding to mountain play.
【Included Parts:presence or absence】.
Only one Seat Cover, no Tandem belt was attached. To begin with, Tandem belt has not been attached to SEROW225W since 1995 (4JG2), even OEM, so there is no problem.
[ITEMS TO BUY TOGETHER
Seat fabric to fasten to Seat Base seat. Tucker, a slightly larger version of Stapler. and short-legged core.
Vinyl bags of Large size (Vinyl bags for Garbage collection and Large sturdy) are available for each person as a measure against flooding of the seat sponge, so those who use these bags should purchase them while they are at it.
In my case, I do not use Vinyl, but I apply SiliconCoking agent to the seams on the reverse side of the Seat fabric to prevent water from seeping through the seams.
Opinions and requests to Manufacturer.
In these days of daily whispers of skyrocketing prices, it is very nice to be able to get Seat fabric at this price.
Please keep up the lineup continuity.
View detail
Usage is limited.
AA01 type square eye SUPER CUB Used for the following
NeutralIndicator in Speedometer (×1pc.)
Blinker indicator (×1pc.)
Back light of the Meter itself (×Quantity:2pc. Set)
You may not want to use it as a back light as the previous reviewer wrote. It is too dark.
(My AA01CUB has a Quantity on the Back light.:Pair (for Left and Right) Quantity:2pc. Set use, so it is not unusable. It is still dark.)
NeutralIndicator and Blinker indicator can be used as a Lamp.
We have been using it for one year and have had no malfunctions. For the price, I think I got my money's worth.
View detail
neither good nor bad
I purchased this for my RC42. However, I could not install it as it is because it was a driving school spec. I modified it and installed it. However, it became Fixed Type which cannot be folded. View detail
Wearable feeling ◎ Made in Taiwan! Made in Taiwan!
I bought this for when I am going to take my friend for a ride or when I go for a walk in the neighborhood with my CUB90! The paint job is beautiful and the Matte Black color is very cool! It is much more comfortable and better looking than the half caps sold at home centers for around 2000 yen! View detail
Rninet Back Mirror
I chose this model because of its design, and I was interested in replacing the OEM's Mirror, which looked like it had been stretched a long time. It is lightweight. There is a little bit of rattling in the connection area, which I will be taking countermeasures for as it is not cured by tightening the bolt. The blue mirror surface reduces the glare from the headlight of the following car, but the rearward vision is a little worse because of the design. And it is easier to remove and reassemble at Circuit because it is easier to remove and reassemble than OEM. View detail
It's hard to close.
If the handle is not intentionally hooked inward when closing, it may not be properly tightened and locked.
Quantity Lever to occupy the lid:It is often frustrating because it often doesn't Set and lock instantly.
The capacity is sufficient to hold a full face in Size XL and +α to hold other things.
View detail
Long tailDuck Tail Helmet
I was worried at the time of purchase that the size might be too large, as I had only chosen L Size, but it fit surprisingly well. View detail
Out of Valve
The blinker bulb of GB250 CLUBMAN has broken. Naturally, we had to replace it, but the front blinker of GB250 CLUBMAN was used together with the small lamp. Therefore, the blinker lights up, but the small lamp does not light up. Well, I have no choice but to keep it until the Rear blinker runs out. View detail