Reviews
Cheap, thin, but usable.
[How is it used?
This 1997 SEROW225WE, which I acquired two years ago, was purchased by an acquaintance of mine six years ago, and I had done a fair amount of repair work on it when I bought it six years ago.
After receiving it the year before last, we prioritized restoration from a functional point of view, but the Seat Cover, which was originally on the verge of unraveling because it had been used for playing in the mountains during that time, had reached its limit.
I searched Webike for Seat fabric to reupholster. MotorcyclePartsCenter. There were only two products available, both in the same color scheme as the OEMSeat type, and I was torn between buying one or the other, so I decided to buy both because they were cheaper.
This time The cheapest one (price at time of purchase:2,830 yen) Review of.
How was your experience with it?
When it was listed in the product section. The higher one is shiny. The cheaper one is WITHOUT Gloss. The actual product that arrived was semi-glossy and I could not tell the difference just by looking at them. When I touched them, I found that the more expensive one (SY107V) had slightly thicker fabric and seemed to last longer than the less expensive one (SY107).
How did it compare to other products?
Incidentally, as of February 2024, YamahaOEM's Seat assembly. is no longer available, but is still available in the Seat CoverSingle Item (17,380 yen).
As expected, the fabric is thinner and less durable than YamahaOEM's Seat fabric, but at this price, it makes enough sense.
[Points to note]
As mentioned above, the Seat fabric is thin, so if the Tucker is driven in halfway during reupholstering, there is a risk that the fabric will break from the Seat Base.
Front and back of the Seat are loosely secured to the Quantity:Pair (for Left and Right) When pasting the "Beauty" sponge, it should be pasted along the "Seat sponge" without wrinkles to make it beautiful.
Other items that would be helpful
The deciding factor in the purchase
I usually post PartsReview with hanghang and use my WebikePoints that I have saved up, so I can buy them at Webike. SEROW225. The only two types of Seat fabric for reupholstery for the new car were available in MotorcyclePartsCenter's lineup.
(Universal Product's Seat fabric was not an option because we wanted to use the same color pattern as the OEM.)
[How is it used?
It is used in various Situations from street riding to mountain play.
【Included Parts:presence or absence】.
Only one Seat Cover, no Tandem belt was attached. To begin with, Tandem belt has not been attached to SEROW225W since 1995 (4JG2), even OEM, so there is no problem.
[ITEMS TO BUY TOGETHER
Seat fabric to fasten to Seat Base seat. Tucker, a slightly larger version of Stapler. and short-legged core.
Vinyl bags of Large size (Vinyl bags for Garbage collection and Large sturdy) are available for each person as a measure against flooding of the seat sponge, so those who use these bags should purchase them while they are at it.
In my case, I do not use Vinyl, but I apply SiliconCoking agent to the seams on the reverse side of the Seat fabric to prevent water from seeping through the seams.
Opinions and requests to Manufacturer.
In these days of daily whispers of skyrocketing prices, it is very nice to be able to get Seat fabric at this price.
Please keep up the lineup continuity.
View detail
Rninet Back Mirror
I chose this model because of its design, and I was interested in replacing the OEM's Mirror, which looked like it had been stretched a long time. It is lightweight. There is a little bit of rattling in the connection area, which I will be taking countermeasures for as it is not cured by tightening the bolt. The blue mirror surface reduces the glare from the headlight of the following car, but the rearward vision is a little worse because of the design. And it is easier to remove and reassemble at Circuit because it is easier to remove and reassemble than OEM. View detail
Out of Valve
The blinker bulb of GB250 CLUBMAN has broken. Naturally, we had to replace it, but the front blinker of GB250 CLUBMAN was used together with the small lamp. Therefore, the blinker lights up, but the small lamp does not light up. Well, I have no choice but to keep it until the Rear blinker runs out. View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50
This price would be good.
OEM Exhaust System purchased for Repair due to rust with Hole
I thought it might need carburetor setting after replacement, but it was Large sturdy without re-setting.
There may be individual differences regarding the installation. As for this installation.
Loosen the setscrews on the body mounting bracket and temporarily assemble the entire body before attaching all the nut
I was able to get it to fit as long as I tightened it evenly. The Clearance at the Chain Adjuster on the Rear is a little tight.
If you are concerned, it is better to secure the clearance by inserting a washer or the like at the Exhaust Bracket.
Good feeling 。 Exhaust Gasket was included with this order.
After about two weeks of installation, rust was spotted, so if you are concerned about this, it is safer to take care of it first during installation.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50
Five years after installation, no problems.
[How is it used?
I've got an acquaintance. I need a SUPER CUB that's been sitting in a barn ready to be ridden." The company purchased this product as replacement parts for a part of the Restore work.
As you can see in image 1, the OEM Exhaust System that was originally installed looks like the entire lower part of the system. Baked sweet potato The exhaust system was brown and rusted with cracks and ruts (the OEM exhaust system is amazing that it doesn't explode).
Since a new OEM Exhaust System is moderately priced, we were grateful for the large change in order to keep repair costs as low as possible.
Was the one you received as per Image?
Retro in the sense that it is a replacement for the simple exhaust system before the heat guard and exhaust cover were standard equipment, and the product is exactly as shown in the image by Webike.
Was the installation difficult?
In my case, it was easily installed without any problems or difficulties. 5 years have passed since the installation, and the exhaust sound has remained unchanged with no exhaust leakage.
I checked other reviews and found that the diameter of the exhaust pipe in the exhaust system part is different and that the exhaust leakage is too large. I am very grateful that the bracket for fixing to the car body is also Standard Equipment, so I am glad that it is Large.
How was your experience with it?
As I mentioned at the beginning, I purchased a less expensive OEM type Exhaust System at that time to reduce the overall repair cost because I purchased it as a repair order from an acquaintance, but even though about 5 years have passed since the installation. I have been able to use it smoothly and comfortably without any Large Rust." so I think durability will not be a problem (of course, there are individual differences).
[Included Parts:were they on?
Included Parts:Or rather, a bracket is attached to the car body for installation.
[Was there anything that disappointed you?
None
The price is low, and if there is no deterioration after 5 years of installation, it is more than expected.
Other items that would be helpful
Point and hang of installation
The entire assembly should be temporarily assembled and the Clearance of each part should be checked before final tightening.
After installation, degrease the engine thoroughly with parts cleaneretc. before starting the engine.
[Availability and clarity of the Instruction Manual
Instruction Manual is not available. If you are purchasing this product as a necessity, you will have no problem without the Instruction Manual.
If you are not confident, you can use the PRO or A friend who can do it well." Let's ask the
[Notes]
[ITEMS TO BUY TOGETHER
Exhaust Gasket Do not reuse and purchase to eliminate exhaust leaks.
Parts cleaner." It is necessary for degreasing after installation. Be sure to degrease before starting.
[Opinions and requests to Manufacturer
It would be enough if you could eliminate individual differences in products as much as possible. Please keep up the Reasonable products.
View detail
Fits: SUZUKI birdie, YAMAHA jog, YAMAHA jog, YAMAHA jog, YAMAHA jog, YAMAHA jog, YAMAHA jog, YAMAHA jog, YAMAHA Cygnus, YAMAHA Cygnus, HONDA APE 50, HONDA GORILLA, HONDA SUPER CUB 50 (AA04), KAWASAKI KDX125/SR, KAWASAKI KDX250SR, SUZUKI LETSG, SUZUKI LETS4, SUZUKI LETS II (2Cycle), SUZUKI LETS II (2Cycle), SUZUKI ADDRESS V100
bulb-out replacement
I was looking for a product that was out of bulbs and the same etc. as the installed product, found this one and purchased it.
The price is reasonable and I hope it has some longevity.
Brightness and other aspects of the Level are fine for normal use.
View detail
Fits: YAMAHA TW225, YAMAHA BRONCO225, YAMAHA SEROW225 WE, YAMAHA SEROW225 W, YAMAHA SEROW225S, YAMAHA SEROW225, YAMAHA TRICKER XG250 TRICKER
Used in Wheel refurbishment
SEROW225 (1KH) for two different uses:off-road racing and everyday use such as touring.
It is troublesome to change tires every time, so I used BRONCO's Wheel which was given to me by someone else. (F-19,R-18) Quantities that also used:I am using 2 sets of BRONCOWheels. The BRONCOWheel I received did not have a disc plate, so I bought this one. Since I had just changed the SEROW side, there is not much difference in the degree of wear, so I can use it without worrying about it.
The performance is perfectly fine. It looks almost OEM, a bit tacky in a good way, which is great for older Motorcycles.
In addition, SEROWheel (F-21,R-18) is equipped with Enduro tires, which are not allowed on public roads, and BRONCOWheel is equipped with Calame rub lock tie rear, which is for public roads.
View detail
Fits: YAMAHA TW225, YAMAHA BRONCO225, YAMAHA SEROW225 WE, YAMAHA SEROW225 W, YAMAHA SEROW225S, YAMAHA SEROW225, YAMAHA TRICKER XG250 TRICKER
SEROWDisc Plate
After installation, I did a FrBraketest and it was no different from the Normal plate&NormalPad, so it can be used.
Here is a comparison with this Disc Plate&DAYTONARed Pad
Braking distance and Brake Fee Ring are the same.
I am looking forward to seeing how it fares on the durability OffRoad course!
View detail
License bolt Green color
Beautiful. I like the color.
It was easy to install.
View detail
Only Yamaha can do it.
Since RoseRose is the way to sell Mirror by Manufacturer, I would like Adapter to think of various combinations and sell them as well. View detail
This is for Setting only!
I purchased this product to get a Setting out when I put Chamber in GRAND AXIS.
It has a variety of Grams, so it was very useful for me to get a rough idea of the Settings! However, the Weight rollerBody is not marked with the number of Grams, so it is difficult to know which Gram is which after repeated removal.
Nice looking Quantities:After the set was over, I was having so much fun that I got side-tracked … I rode the car for about 10 kilometers and suddenly it started to move in an unpleasant manner. When I opened the drivetrain, I found that the weight roller had gapped from the pulley…. It was completely self-inflicted…;
When the drivetrain is set up, it is recommended to replace it with a decent external weight roller from OEM or KITACO etc.
View detail
generic disc
[How is it used?
almost every day
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
The level was manageable with a service manual in hand, but Torque management must be done properly because it is an important braking device.
How was your experience with it?
I was a bit concerned about the price, but I heard Brake was very good. It is not that the cutting is that crude, and it is excellent in terms of cost performance.
[Included Parts:were they on?
DISC only.
[Was there anything that disappointed you?
Not particularly
View detail
Orange Lens with White LEDs!
[How is it used?
Tail lamp, Headlight, followed by Relay and Quantity:Blinker with Set was also purchased to convert to LED.
Was the one you received as per Image?
The product was exactly as shown in the Image.
Was the installation difficult?
The bulb alone was SocketOn, but this time we replaced the Blinker and Relay together, so it took a lot of time and effort to handle the Wiring.
In particular, Relay is under the tank, so it is necessary to close the Left Side Cover and tank to the wiring.
How was your experience with it?
I was not sure about the Universal Orange bulb, but since it was Orange Lens, I decided to go with the White color bulb. As a result, I feel that the Orange Lens is yellowish in the daytime. At night, as you can see in the video and images, the coloring is Orange without any problem.
[Included Parts:were they on?
Naturally, there is nothing else.
[Was there anything that disappointed you?
I'm in a different mood. [Color] Considering that I wanted to change to Smoke or Clear Lens, I still think I should have gone with the Orange sphere.
LED bulbs have a lower wattage than regular bulbs and do not generate much heat, so they are gentle on the battery and prevent deterioration of the Lens.
View detail
Wiring Connection
Wiring distribution for Bullet Type Terminal, Double Type is required to make the connection and is purchased.
It contains 10 pieces, comes with a Cover, and is a cosmetically pleasing product.
It looks like it is MADE IN CHINA …
Now, the Wiring connection can be made at last.
View detail
Fits: YAMAHA SEROW225, YAMAHA SEROW225
Expecting a product name of high quality Type!
I have bought a cheap Seat Cover from another Manufacturer and used it for my SEROW before.
I was happy that it became Beauty, but I had the impression that it wasn't strong enough. (It is soft and seems to tear easily.)
This time, I'm thinking of reupholstering the SEROW which I own one more.
This time, high quality! I bought this one. (I'm satisfied with the purchase and haven't worked on it yet.)
It's similar in appearance to our last cheapie.
Tandem belt must be black.
Center Color with Black Skin on SIDE:Gray skin Material must be used in different ways.
The tensile strength seems to be a little strong.
I felt the difference between the two.
In addition, the back side was printed like MaterialManufacturer's Logo?
In the picture of the two cars side by side, the front seat is a cheap seat that I did before. I want to reupholster the blue seat which is a little high seat in the back. If I can reupholster it well, I'll try to put YAMAHALogo on the side part by dyeing Q...
You will need a tucker for this work. I have an Air Tucker, so it's easy for me, but if you use a Hand Tucker, you'll need a lot of strength.
You can also tuck a piece of Vinyl for Waterproof under the epidermis. I use Large fine-gauge Garbage bags.
View detail
Close to OEM
It is softer than OEM. I think it will be almost same as OEM in shape.
It had a hole in it, so it looks better than anything else, and I think it's worth changing if you're going to be riding for a long time.
Used for YamahaJOGSA39J.
View detail
Firm Spring force.
The spring is very firm and connects the joints of the exhaust pipe, it is convenient to use for repair and the price is cheap and the quality is good. View detail
No harm in having it! Surprisingly firm Cowl
I've been riding PCX for about 5 years now.
From daily commuting to LightTouring and snowmobiling, SmallWound has been increasing.
He is a very good boy and I want to continue to drive him for a long time, so I bought Cowl as a spare.
When they arrived, each one was individually wrapped and secure, but I was surprised to find that the corrugated cardboard was large.
The shipping would have been expensive.
I opened it up and the quality is as good as the OEMCowl.
The surface is also well Lame processed, and I was surprised that it was amazing for this price.
As is the case with all motorcycles of this class, the claws that hold the cowl in place often break during operation, and 1 pcQuantity:If it's 2pc or so, it's no problem, but if 2-3 pieces are broken, you can't install it.
I have no plans to replace it in the foreseeable future yet. I bought this as a spare as similar products have been noticeably discontinued.
I was wondering if there was anything else that was this cheap.
View detail
Relatively solid construction.
I had to replace the Basket I had been using because it had become ragged.
I chose the M Size because it is not too large.
For a cheap price, it's surprisingly solid.
Unfortunately, the mounting screw is too long.
There is no problem in actual use, but the short screw on hand is the Quantity:I had 2pc so I just replaced the front.
Also, it's nice to turn off Handlebar and not hit the Leg shield.
View detail
Fits: HONDA LIVE DIO, HONDA LIVE DIO, HONDA LIVE DIOZX, HONDA LIVE DIOZX
I used this service for Piston replacement.
It was cheaper than the OEM and the quality was fine. View detail