Reviews
Cowl mounting holes do not fit
Paint quality is good. It makes it look like a new car! I had to force it on with Tie Wrap or re-drill the holes … I think it may have been an individual mistake, but … I drilled the holes with a Drill and installed it. If you can install it, you will be supremely satisfied. View detail
fitment issues
I was excited to recieve this poduct. There are a few fitment issues with these plastics for my af27 dio. The front piece the 4 bolts on the back side only two line up the other two are so far off would need to enlarge holes to make it work. The top headlight piece does not fit well pops out on the one side and on the middle. The rear pieces seems to fit alittle better but not the best. View detail
Fits: HONDA Today, HONDA Today, HONDA Giorno, HONDA DIO(4Cycle), HONDA DIO(4Cycle)
How durable is it?
Restore TODAY after many years of neglect, 4 years.
Will the Fork Boots break off from age?
I couldn't cut it out of my mind…
I noticed a tear and replaced it.
I thought OEM would be better in terms of texture. I thought so.
How long do you think it will last as a consumable?
I would like to verify this.
The protrusion for fixing the drum brake on the LeftFork was quite fiddly.
View detail
The price
Tucker required as a Large premise. not just a product to be covered.
Good fabric look and feel.
I'm not sure about the durability of this product.
View detail
So so
I guess it's okay…
The hole position is different or…
Fitting is subtle des…
It is good if you are not particular.
View detail
Leg shield LITTLE CUB
I bought this leg shield for SUPER CUB knowing that it needs some modification because of its low price. I installed it by shaving only the part near the handle. I was disappointed with the position of the bolt fixing holes at the foot. I wonder if this is a defect of only the product I received? View detail
easy to stick to
I put it up and it looked good and I liked it, but despite careful degreasing, some of it started peeling off after about a year. I used the MDF ones for about 3 years before I bought the new ones and they never peeled off. It was cheap, so if it lasted for a year, it would be a good thing. It's cheap, so it's possible to change it regularly. View detail
Seat is brand new.
I used HandTucker to reupholster my Seat. The only difference from the OEM Seat cover is that the back of the Seat is not covered. "Honda" There is no Logo mark in the View detail
Not bad, huh?
Used for YamahaJOGSA39J.
WaterproofRubber rubber on the back side of the seat and Hinge part were used without replacing.
If you do not replace the waterproof rubber on the back of the seat, the seat will not come up by itself because the rubber is too thin when you open it.
What if the durability doesn't go?
I think the price is high for this.
View detail
Is it a price?... I am satisfied..
While OEM is expensive or out of print, I think that price is good. Cover Mall etc. And fitting etc with cutting etc.. Processing is required, but OEM same etc.. It is impossible to obtain Quality of. By all means, some gaps. Is not it the scope of compromise... View detail
CF4MA's handy Rear spoiler
Once installed, it is as good as it is.
Though it may be useless if it considers low price, there are three points to worry about.
As a matter of course naturally you do not mind - -.
(1) There is BALI in an unobtrusive place.
There is quite a BALI in the detail which is not noticeable but not conspicuous,
Since it is painted from above, taking BALI
The paint will also come off.
* You can take BALI if you rub it by hand.
(2) Coarse paintings are out of sight.
It may be useless because it is a part that is unobtrusive although there is unevenness.
(3) Spoiler mounting holes are out of position.
As far as I can see, I can not imagine individual differences, but some
You may need adjustments.
Large It is work in the assumed rather than a wide adjustment.
Peeling off of paint can be dealt with by Touch pan, but there is some resistance to paint from the beginning.
Although I evaluated it dryly, I want companies to work hard because companies are striving to sell a lot of attractive products at a low price.
If you install it I think that it looks good as it is shown in the picture.
View detail
Low price but high quality. Exquisite Ripro feeling (lol
It is inexpensive, but it is quite troublesome. Screw hole is also OK.. What is the hole on the top
Although it is strange, there is no problem for installation.
Because color is Cream color, people with white covering Side cover are cautious. Different colors
The feeling comes out and it makes you feel quite a little floating.
Even if Emblem is attached, it is not Emblem of CoconutWhite
I think that it will not fit. I have not attached Emblem.
Overall it is highly appreciated, but I'm concerned about the bottom line's bottom.
OEM is falling straight, but BPC's this is Quantity : Pair (for Left and Right) Hitoshi etc. I am distorted.
I think whether you can understand even upgraded images.
By the way, in order to rectify Yore, we cut Cutter a little in the lower half,
I will be more and more out if you buy it.
But well, Yore is quite good in Reproduct.
What is the rest?. Somehow the overall exquisite Ripro feeling drifts (Lol).
There is an aur who understands immediately as Ripro.
But it's cheap there. There is no problem if you do not want to use it by all means.
There is a feeling that it is harder to get dirty than OEM and fine Crack, so at that point
There is Advantage.
View detail
Packaging is gd but doesn't comes with screws to fix with.. have to seperately buy screws.other than that shipping abit slow. Item in gd condition when received. Thanks!
Packaging is gd but doesn't comes with screws to fix with.. have to seperately buy screws.other than that shipping abit slow. Item in gd condition when received. Thanks! View detail
nice bikini cowl, but the screw turns rust after the rain. it vibrate when runs into hump or uneven road. delivery can say very fast, packing in good condition
nice bikini cowl, but the screw turns rust after the rain. it vibrate when runs into hump or uneven road. delivery can say very fast, packing in good condition View detail
[Webike Monitor] It is the way freedom to be used. Although a Corrugate tube covers wiring, since it was a Plating type, it was covered from the top on the Hose of the Oil Breather. It is good touch. Since it is it and one photograph, it has
[Webike Monitor]
It is the way freedom to be used.
Although a Corrugate tube covers wiring, since it was a Plating type, it was covered from the top on the Hose of the Oil Breather.
It is good touch.
Since it is it and one photograph, it has not contributed, but it is a Cable of the Meter of a Front? It was alike and had.
They were this and good touch.
Please imitate.
Since it is the
Plating type and a Plating separates weakly in extreme bending, special attention is required.
View detail